双曲拱桥加固后荷载试验分析与承载力评定
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
该文以一座3孔30m的双曲拱桥(土山桥)为实例,根据该桥型的结构特性和加固特点,确定合理的荷载试验方案并进行测试。利用大型通用有限元结构分析程序ANSYS对该桥进行静力和动力计算,并与试验结果进行对比分析,从而对该双曲拱桥的加固效果和承载力进行综合评定。
The article takes a 3-span 30-m double-curve arched bridge(Tushan Bridge)as an example to determine the reasonable load test scheme and to test based on the structural features and reinforcement characteristics of this bridge.The large-sized common finite element structural analysis program ANSYS is used to carry out the static and dynamic calculations of the bridge,and to analyze and compare with the test result so as to carry out the comprehensive evaluation of the reinforcement result and the bearing capacity of this double-curve arched bridge
引文
[1]公路桥涵设计通用规范JTJ021-89[S].
    [2]交通部标准公路旧桥承载能力鉴定方法(试行)[S].北京:人民交通出版社,1989
    [3]邓苗毅等.现有双曲拱桥静力荷载试验及分析[J].河南科学,2004
    [4]董建华等.34.2m双曲拱桥力学性能分析[J].隧道建设,2004
    [5]范立础等.上海南浦大桥纵向地震反应分析[J].土木工程学报,1992
    [6]徐州市邳州邳睢路土山桥荷载试验检测与维修报告[R].东南大学交通学院,2003
    [7]公路双曲拱桥上部构造设计计算(第二版)[M].北京:人民交通出版社,1983

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心