盾构隧洞双层衬砌接头荷载试验研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
大多数情况下 ,盾构隧道二次衬砌是不作为受力构件的 ,目前双层衬砌的受力计算还没有形成统一的设计规范 .为此以我国规划设计中的南水北调中线穿黄隧洞为研究背景 ,介绍了穿黄隧洞双层衬砌荷载试验原理、测试方法、试验结果及内外衬内力分配的计算方法
In most cases,the secondary linings of shield tunnels are not so designed as to bear loads at present.There is not uniform criterion prescribing how to analyze shield tunnels reinforced by secondary linings.Based on the structural loads test of the yellow river_crossing tunnel which is in programming in China,this paper deals with the principal method and results of the loads test.
引文
[1] NasriAWunfah,MichaelPDellaPosta.Fullscaletestingoftunnelliner[A].HerrmanLR .TowardsNewWorldsinTunnelling[C].Rotter dam:Balkema,1992.315-320.
    [2] 村上博智,小泉.二次覆工で补强されたシ一ルドセグメントリングの拳动について[J].土木学会论文集,1987(388):85-93.
    [3] 王振东,施岚青.混凝土结构设计规范设计方法[M].北京:地震出版社,1991.16-20.
    [4] 江见鲸,冯乃谦.混凝土力学[M ].北京:中国铁道出版社,1991.64-71.
    [5] 清华大学抗震抗爆工程研究室.混凝土力学性能的试验研究[M].北京:清华大学出版社,1996.131-157

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心