崩落法转充填法采矿地表移动二维离散元程序数值模拟及其规律验证
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
基于数字式全景钻孔摄像系统及现场统计对井下矿体及围岩进行了节理调查分析,利用Surpac建立了采空区三维模型并进行剖分,最终建立了二维离散元模型(UDEC),研究不同水平矿体开采时位移场的变化规律和采空区上覆岩层的冒落形式,记录并分析矿体开采过程中岩石移动角变化规律并进行了对比验证。研究结果表明:充填法开采-430~-500 m矿体时,采空区最大位移为205.6 cm,小于崩落法的215.2 cm;对比充填法和崩落法新副井沉降值和水平位移值发现,充填法地表倾斜率为0.56 mm/m,小于崩落法的1.22 mm/m,水平变形率为1.03 mm/m,小于崩落法的1.31 mm/m,对于控制新副井沉降和地表移动具有良好效果。在崩落法开采时覆岩移动存在一定间歇性和跳跃性,冒落过程中可能形成自稳平衡拱,从而形成隐伏采空区。根据实际监测与模拟结果对比,在同一水平开采时间较长时,移动角减小速率呈跳跃性非均匀变化,表现为缓慢变化-加速变化-缓慢变化-加速变化的循环过程,进一步验证了自稳平衡拱和隐伏采空区的存在。
An investigation into the joints of the ore body and rock mass at Chengchao iron mine is performed with combination of digital panoramic borehole camera system and in-situ statistics.Based on software Surpac,a 3D model for the gob is built.By subdividing the 3D model,a 2D discrete element model based on Universal Distinct Element Code is developed.The model is utilized to simulate the law of displacement fields and the rock-fall patterns of the overlying rock at different elevations when ore bodies are mined.The variations of the rock movement angle are analyzed.It is shown that:(1)When the ore bodies at the elevations between-430 m and-500 m are mined using back filling method;the maximum displacement for the gob is 205.6cm,which is smaller than the 215.2cm measured with the caving method.By comparing the settlement values and the horizontal displacement values of the auxiliary shaft,it is found that the incline rate of surface is 0.56mm/m for back filling method,smaller than the 1.22mm/m for the caving method;the horizontal deformantion rate is 1.03mm/m,smaller than the 1.31mm/m for the caving method;it is shown that the back filling method has a good effect on controlling overlying rock displacement and ground movement.(2) The movement of the overlying rock behaves in the manner of intermittence and jump when using the caving method.A self-balancing arch can be formed in the process of the overlying rock falling;hence,a number of hidden gobs may occur.Based on the comparison between the practical monitoring data and the numerical simulation,it is found that when a long period mining is carried out at a given depth,the decrease rate of movement angle exhibits a nonuniform variation mode,namely "slow-acceleration" cycle,implying the occurance of the self-balancing arches and gobs.
引文
[1]鞠杨,李业学,谢和平,等.节理岩石的应力波动和能量耗散[J].岩石力学与工程学报,2006,25(12):2426-2434.JU Yang,LI Ye-xue,XIE He-ping,et al.Stress wave propagation and energy dissipation in jointed rocks[J].Chinese Journal of Rock Mechanics and Engineering,2006,25(12):2426-2434.
    [2]徐卫亚,杨圣奇.节理岩石剪切流变特性试验与模型研究[J].岩石力学与工程学报,2005,24(增刊2):5536-5542.XU Wei-ya,YANG Sheng-qi.Experiment and modeling investigation on shear rheological property of joint rock[J].Chinese Journal of Rock Mechanics and Engineering,2005,24(Supp.2):5536-5542.
    [3]蒋宇静,王刚,李博,等.岩石节理剪切渗流耦合试验及分析[J].岩石力学与工程学报,2007,26(11):2253-2259.JIANG Yu-jing,WANG Gang,LI Bo,et al.Experimental study and analysis of shear-flow coupling behaviors of rock joints[J].Chinese Journal of Rock Mechanics and Engineering,2007,26(11):2253-2259.
    [4]刘凯欣,高凌天.离散元法研究的评述[J].力学发展,2003,33(4):483-485.LIU Kai-xin,GAO Ling-tian.The comments of discrete element method[J].Advances in Mechanics,2003,33(4):483-485.
    [5]KAISER P K,MARTIN C D,SHARP J,et al.Underground works in hard rock tunnelling and mining[M].Melbourne,Australia:Technomic Publishing Co.,2000:841-926.
    [6]CUNDALL P A,HART R D.Numerical modeling of discontinue[C]//Comprehensive Rock Engineering,London:Pergamon Press Ltd,1993:231-243.
    [7]IWASHITA K,ODA M.Micro-deformation mechanism of shear banding process based on modified distinct element method[J].Powder Technology,2000,109(1):192-205.
    [8]潘俊锋,齐庆新,毛德兵,等.冲击性顶板及其应力演化特征的3DEC模拟研究[J].岩石力学与工程学报,2007,26(增刊1):3546-3552.PAN Jun-feng,QI Qing-xin,MAO De-bing,et al.Study of movement and stress evolutionary process of impacted roof with 3DEC[J].Chinese Journal of Rock Mechanics and Engineering,2007,26(Supp.1):3546-3552.
    [9]周家文,徐卫亚,石崇.基于3DEC的节理岩体边坡地震影响下的楔形体稳定性分析[J].岩石力学与工程学报,2007,26(增刊1):3402-3409.ZHOU Jia-wen,XU Wei-ya,SHI Chong.Wedge stability analysis of jointed rockmass slope considering seismic influences based on 3DEC[J].Chinese Journal of Rock Mechanics and Engineering,2007,26(Supp.1):3402-3409.
    [10]王涛,陈晓玲,杨建.基于3DGIS和3DEC的地下洞室围岩稳固性研究[J].岩石力学与工程学报,2005,24(19):3476-3481.WANG Tao,CHEN Xiao-ling,YANG Jian.Study of stability of underground cavern based on 3DGIS and3DEC[J].Chinese Journal of Rock Mechanics and Engineering,2005,24(19):3476-3481.
    [11]王卫华,李夕兵,胡盛斌.模型参数对3DEC动态建模的影响[J].岩石力学与工程学报,2005,24(增刊1):4790-4797.WANG Wei-hua,LI Xi-bing,HU Sheng-bin.Effect of model parameters on 3DEC dynamic modeling[J].Chinese Journal of Rock Mechanics and Engineering,2005,24(Supp.1):4790-4797.
    [12]WANG WEI-HUA,LI XI-BING,ZUO YU-JUN,et al.3DEC modeling on effect of joints and interlayer on wave propagation[J].Transactions of Nonferrous Metals Society of China,2006,(16):728-734.
    [13]周正义,曹平,林杭.3DEC应用中节理岩体力学参数的选取[J].西部探矿工程,2006,7:163-165.ZHOU Zheng-yi,CAO Ping,LIN Hang.The rock mechanics parameters selection of jointed rocks based on3DEC[J].West-China Explotation Engineering,2006,7:163-165.
    [14]赵坚,陈寿根,蔡军刚,等.用UDEC模拟爆炸波在节理岩体中的传播[J].中国矿业大学学报,2002,31(2):111-115.ZHAO Jian,CHEN Shou-gen,CAI Jun-gang,et al.Simulation of blast wave propagation in jointed rock mass using UDEC[J].Journal of China University of Mining&Technology,2002,31(2):111-115.
    [15]CHEN QING-FA,ZHOU KE-PING,LONG TENGTENG,et al.UDEC-based stability analysis of the goafs in fragment ore section[C]//Proceedings of International Conference on Computer Modeling and Simulation.Macau:IEEE,2009,239-243.
    [16]莫振泽,李海波,周青春,等.基于UDEC的隧道掘进机滚刀破岩数值模拟研究[J].岩土力学,2012,33(4):1196-1202.MO Zhen-ze,LI Hai-bo,ZHOU Qing-chun,et al.Research on numerical simulation of rock breaking using TBM disc cutters based on UDEC method[J].Rock and Soil Mechanics,2012,33(4):1196-1202.
    [17]LI HUI,YUAN DONG-SHENG,XU LU,et al.Based on numerical simulation support scheme selection[C]//International Conference on Computer Science and Service System.[S.l.]:[s.n.],2011:258-262.
    [18]雷远见,王水林.基于离散元的强度折减法分析岩质边坡稳定性[J].岩土力学,2006,27(10):1693-1698.LEI Yuan-jian,WANG Shui-lin.Stability analysis of jointed rock slope by strength reduction method based on UDEC[J].Rock and Soil Mechanics,2006,27(10):1693-1698.
    [19]GAO FU-QIANG,STEAD DOUG,COGGAN JOHN,et al.Evaluation of coal longwall caving characteristics using an innovative UDEC trigon approach[J].Computers and Geotechnics,2014,55:448-460.
    [20]刘振有,王来贵.基于UDEC的边坡稳定性分析[J].辽宁工程技术大学学报,2007,26(增刊1):113-115.LIU Zhen-you,WANG Lai-gui.Analysis of slope stability based on UDEC[J].Journal of Liaoning Technical University,2007,26(Supp.1):113-115.
    [21]郑刚,程雪松,刁钰.基坑垮塌的离散元模拟及冗余度分析[J].岩土力学,2014,35(2):573-583.ZHENG Gang,CHENG Xue-song,DIAO Yu.Discrete element simulation and redundancy analysis of excavation collapse[J].Rock and Soil Mechanics,2014,35(2):573-583.
    [22]蒋明镜,张宁,陈贺.岩石化学风化时效效应的离散元模拟[J].岩土力学,2014,35(12):3577-3584.JIANG Ming-jing,ZHANG Ning,CHEN He.Discrete element simulation of aging effect of chemical weathering on rock[J].Rock and Soil Mechanics,2014,35(12):3577-3584.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心