引文
[1]程裕淇.中国区域地质概论[M].北京:地质出版社,1994.(Cheng Yuqi.Introduction to regional geolo-gy in China[M].Beijing:Geological PublishingHouse,1994.(in Chinese))
[2]张立德,周小兵,赵长海.软岩隧洞设计与施工技术[M].北京:中国水利水电出版社,2006.(ZhangLide,Zhou Xiaobing,Zhang Changhai.Techniques oftunnel design and construction in soft rocks[M].Bei-jing:China Water Conservancy and Hydropower Pub-lishing House,2006.(in Chinese))
[3]韩瑞庚.地下工程新奥法[M].北京:科学出版社,1987.(Han Ruigeng.New austria tunnelling method inunderground engineering[M].Beijing:Science Pub-lishing House,1987.(in Chinese))
[4]N.Yoshida,M.Nishil,M.Kitamural,et al.Analysisof mudstone deterioration and its effect on tunnel per-formance[J].International Journal of Rock Mechanicsand Mining Sciences,1997,34,(3-4):353.e1-353.e19.
[5]T.T.Wang,T.H.Huang.An experience of tunnellingin mudstone area in southwestern Taiwan[J].Tunnel-ling and Underground Space Technology,2002,17(4):425-436.
[6]李晓红.隧道新奥法及其量测技术[M].北京:科学出版社,2002.(Li Xiaohong.New austria tunnellingmethod and monitor techniques[M].Beijing:SciencePublishing House,2002.(in Chinese))
[7]Fulvio Tonon.Sequential excavation,NATM and ADE-CO:What they have in common and how they differ[J].Tunnelling and Underground Space Technology,2010,25(3):245-265.
[8]杜菊红,黄宏伟,雷新文.平年小间距隧道监控量测分析[J].地下空间与工程学报,2007,3(增2):1 417-1 420.(Du Juhong,Huang Hongwei,Lei Xin-wen.Monitoring and measurement analysis of Piannianclosely-spaced tunnel[J].Chinese Journal of Under-ground Space and Engineering,2007,3(Supp.2):1 417-1 420.(in Chinese))
[9]闫宇蕾,刘保国.连拱隧道施工监控量测技术研究[J].地下空间与工程学报,2007,3(增1):1382-1 386.(Yan Yulei,Liu Baoguo.Research on technolo-gy of monitoring and measurement in double-arch tunnelconstruction[J].Chinese Journal of UndergroundSpace and Engineering,2007,3(Supp.1):1 382-1 386.(in Chinese))
[10]曲海峰,朱合华,黄成造,等.隧道初期支护的钢拱架与钢格栅选择研究[J].地下空间与工程学报,2007,3(2):258-262.(Qu Haifeng,Zhu Hehua,Huang Chengzao,et al.Study on selection of section-steel and grid-steel in primary support system of tunnel[J].Chinese Journal of Underground Space and Engi-neering,2007,3(2):258-262.(in Chinese))
[11]李鹏飞,张顶立,赵勇,等.大断面黄土二次砌衬受力特性研究[J].岩石力学与工程学报,2010,29(8):1 690-1 696.(Li Pengfei,Zhang Dingli,ZhaoYong,et al.Study of mechanical characteristics ofsecondary lining of large-section loess tunnel[J].Chinese Journal of Rock Mechanics and Engineering,2010,29(8):1 690-1 696.(in Chinese))
[12]李煜舲,许文贵,林铭益.以隧道变形量测资料分析掘进效应与约束损失[J].岩石力学与工程学报,2009,28(1):39-46.(Li Yulin,Xu Wengui,Lin Mingyi.Analysis of advancing effect and confine-ment loss by using deformation measurements in tunnel[J].Chinese Journal of Rock Mechanics and Engi-neering,2009,28(1):39-46.(in Chinese))
[13]李晓红,李登新,靳晓光,等.初期支护对软岩隧道围岩稳定性和位移影响分析[J].岩土力学,2005,26(8):1 207-1 210.(Li Xiaohong,Li Dengx-in,Jin Xiaoguang,et al.Discussion on influence ofinitial support to stability and deformation of surround-ing rock mass in soft rock tunnel[J].Rock and SoilMechanics,2005,26(8):1 207-1 210.(in Chi-nese))
[14]关宝树.隧道力学概论[M].成都:西南交通大学出版社,1993.(Guan Baoshu.Introduction to tunnelmechanics[M].Chengdu:Southwest Jiaotong Univer-sity Press,1993.(in Chinese))
[15]Carranza Torres C,Fairhurst C.Application of theconvergence-confinement method of tunnel design torock masses that satisfy the Hoek-Brown failure criteri-on[J].Tunnelling and Underground Space Tech-nique,2000,15(2):187-213.
[16]李世辉.隧道支护设计新论[M].北京:科学出版社,1999.(Li Shihui.New concept on tunnel support[M].Beijing:Science Publishing House,1999.(inChinese))
[17]中华人民共和国行业标准.公路隧道设计规范(JTG D70-2004)[S].北京:人民交通出版,2004.(The Industrial Standard of People’s Republic of Chi-na.Code for design of road tunnel(TB10003-2005/J449-2005)[S].Beijing:People’s TransportationPublishing House,2004.(in Chinese))
[18]Oreste,P.P.Analysis of structural interaction in tun-nels using the convergence confinement approach[J].Tunnelling and Underground Space Technology,2003,18(4):347-363.
[19]本书编委会.钢结构工程必备数据一本全[M].北京:地震出版社,2007.(Manual of reference data forsteel structures[M].Beijing:Seismological PublishingHouse,2007.(in Chinese))
[20]朱永全,刘勇,张素敏.洞室大小和形状对极限位移的影响[J].岩石力学与工程学报,1998,17(5):527-533.(Zhu Yongquan,Liu Yong,Zhang Sumin.The influence of tunnelling size and shape on limit dis-placement[J].Chinese Journal of Rock Mechanicsand Engineering,1998,17(5):527-533.(in Chi-nese))