洞室工程地震CT与VSP联合检测方法及应用实例
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
地震层析成像(CT)和垂直地震剖面(VSP)法一直作为两种完全分离的探测技术在勘探活动中运用,而洞室工程地震CT与VSP联合检测方法则是充分利用VSP和CT数据采集方式的兼容性,通过一体化观测系统参数设计和优化数据处理流程,将两种地震勘探手段融为一体而成为优化组合技术下的高分辨工程物探方法。方法实验结果表明,地震CT与VSP联合检测方法在近地表岩土工程勘查应用中几乎可以不增加野外工作费用,就能够同时获取地下洞室工程体施测区间内的地震CT数据和关于洞室轴向剖面方向的逆向VSP数据体。
Up to now, the Seismic Computerized Tomography(CT) method and Vertical Seismic Profile(VSP) method are two completely separated detection method used in exploration, but " the method of joint detection with cavity engineering seismic CT and VSP" may demonstrate the compatibility of VSP and CT data. Designing the process flow according to the integral layout parameters, these two methods can be fused as one with high resolution adopting the strategy above with practical examples, the seismic CT dataset of the subsurface cavity and reverse VSP dataset can be got in the axial profile direction of the cave at the same time, and the exploration cost can not be in creased. The datasets such as multi-offset reverse VSP gather can be developed at each receiving station and walk-away reverse VSP gather at each shot station.
引文
[1]Nolet主编.地震层析技术[M].冯锐,郝景琦,译.北京:地质出版社,1991.
    [2]赫尔曼G T,图伊H K,兰振伯格K J,等.层析成像和反演问题的基本方法[M].黄联捷,李幼铭译.北京:石油工业出版社,1997.
    [3]杨文采.工程地球物理反演的理论与方法[M].北京:地质出版社,1997.
    [4]朱光明.垂直地震剖面方法[M].北京:石油工业出版社,1988.
    [5]谢明道.垂直地震剖面应用技术[M].北京:石油工业出版社,1991.
    [6]傅淑芳,朱益仁.地球物理反演问题[M].北京:地震出版社,1998.
    [7]冯锐,楼家丁.层析技术在水电工程中的应用[A].中国固体地球物理学进展[C].北京:海洋出版社,1999.
    [8]张双喜,刘永华,李江风.工程VSP技术在三峡坝区中的应用[J].地球物理学报,1996,39(增刊):316~325.
    [9]田宗勇,刘永华.工程VSP和井间CT技术联合反演方法的研究[R].北京:水利部科技开发项目SJ9609研究报告,2000.
    [10]刘永华,田宗勇,喻振华,等.工程VSP与地震CT联合探测方法及其在岩土工程的应用[J].地球物理学进展,2005,20(1):267~272.
    [11]杨正华,朱光明,杜有成,等.井地联合地震勘探在陕北油田开发中的应用[J].地球科学与环境学报,2004,26(1):65~68.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心