SN388地震电缆数传测试器研制
|
摘要
利用多级移位寄存器构成m序列伪随机信号发生器 ,产生伪随机数字信号 ,作为测试信号源 ,将信号通过接口电路转换为RS -4 85信号 ,使之与SN3 88地震电缆中传送的信号相仿 ,送入测试电缆中传输 ,然后将电缆发送端和接收端的信号进行位对位的比较 ,获得测试电缆的传输误码数 ,以此来判断地震电缆的数传性能的好坏。使用证明该测试器可有效检测SN3 88地震电缆的数传性能。
The tester of SN388 seismic cable uses multi-shift-register forming a m-sequence generator to generate pseudo random digital signal,which is used as a signal source of the tester. The signal transforms into RS-485 signal through interface circuit,which makes the signal is similar to the acquisition signal in SN388 cable,then passes through the test cable. The transmission missing code is obtained by bit to bit comparison of signals from transmitting port and receiving port,and the result can show the transmission capability of SN388 seismic cable. The practice proves the tester is effective.
The tester of SN388 seismic cable uses multi-shift-register forming a m-sequence generator to generate pseudo random digital signal,which is used as a signal source of the tester. The signal transforms into RS-485 signal through interface circuit,which makes the signal is similar to the acquisition signal in SN388 cable,then passes through the test cable. The transmission missing code is obtained by bit to bit comparison of signals from transmitting port and receiving port,and the result can show the transmission capability of SN388 seismic cable. The practice proves the tester is effective.
引文
[1] 潘中印,张传兆,袁玉安,等.SN388有线遥测仪数据传输技术[M ].石油仪器,1999.13(1)
[2] MAXIM公司.GuidelinesforproperwiringofanRS -485network[DB/OL].www.maxim-ic.com,2001
[3] MAXI公司.MAX3291/MAX3292[DB/OL].www.maxim-ic.com.cn,1999
[4] 梁廷贵.现代集成电路使用手册[M ].北京:北京科学技术出版社,2002
[2] MAXIM公司.GuidelinesforproperwiringofanRS -485network[DB/OL].www.maxim-ic.com,2001
[3] MAXI公司.MAX3291/MAX3292[DB/OL].www.maxim-ic.com.cn,1999
[4] 梁廷贵.现代集成电路使用手册[M ].北京:北京科学技术出版社,2002
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心