莲花山-张家坪须二段气藏地质建模
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
结合三维地震数据及井上的裂缝资料建立了莲花山-张家坪须二段气藏的三维裂缝密度模型、裂缝空间网络模型及裂缝系统的孔、渗属性模型。研究表明:莲花山-张家坪须二段气藏有效砂岩厚度均值为24m,在LH101、LH000-4、zhangjia1等储层较厚处,有效砂岩厚度超过30m,在sanhenan1、LH000-1井等区域,有效砂岩厚度不足10m。莲花山-张家坪须二段气藏基质孔隙度均值为5.12%,在LH101、LH000-4井区,孔隙度超过6.0%,其它区域,孔隙度在5%以下。
Seismic structural interpretation and stratigraphic correlation achievements of 3D structural model and three-dimensional grid model were built in this paper,the properties of three-dimensional model of the matrix,including facies,porosity,permeability and saturation model were built and studied based on log interpretation results.The study showed that the Lianhua Shan-Zhangjia Ping Xu 2 Duan gas reservoir effectively mean sandstone thickness is 24m,the effective sandstone thickness of reservoir LH101、LH000-4、zhangjia1,are more than 30m,the sandstone thickness of sanhenan1、LH000-1 wells are less than 10m.The average porosity of Lianhua Shan-Zhangjia Ping Xu 2 Duan gas reservoir is 5.12%.The porosity of area near LH101、LH000-4 well is more than 6.0%,but the porosity of other area is less than 5%.
引文
[1]向传刚.PETREL软件在油藏数值模拟研究中的应用[J].内蒙古石油化工,2009,(15):8~11.
    [2]张兵,顾远喜,宋廷春,等.Petrel软件在八区下乌尔禾组256井断裂上盘精细地质与开发特征研究中的应用[J].新疆石油天然气,2010,6(4):52~54.
    [3]周静萍,汤军,杨争,等.下寺湾油田长8段储层相控建模研究[J].四川地质学报,2012,32(1):29~31.
    [4]陈建阳,于兴河,李胜利,等.地质条件约束下的储层建模方法与应用研究——以镇泾油田长6油层组为例[J].石油地质与工程,2007,21(4):9~12.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心