基于ANSYS的HJJ31546型海洋井架安全性分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
采用ANSYS软件对HJJ31546型海洋井架进行不同工况下的静力计算、模态分析及地震谱响应分析,得到了井架结构的固有频率、振型及在各种工况下的最大应力。结果表明:HJJ31546型海洋井架符合API Spec 4F设计规范;外界环境频率接近1.5Hz时,井架可能会因共振而受到破坏;井架沿地震位移激励方向的响应明显。所得结论可为海洋钻机井架的设计、优化、评价提供理论依据。
The ANSYS software was used to simulate static calculation of different conditions,modal analysis and random vibration analysis.The natural frequency and mode of the derrick were obtained,as well as the maximum stress in a variety of conditions.It is found that model HJJ31546 offshore derrick complies with API Spec 4Fdesign specifications.Derrick may be damaged due to resonance when the frequency of the external environment is close to 1.5Hz.It also has obvious incentive along the direction of the seismic response of displacement.This study can provide the basis for offshore derrick design and optimization and is important for the mechanical function evaluation of offshore derrick simultaneously.
引文
[1]李夯,齐明侠.基于ANSYS的K型井架结构研究[J].石油矿场机械,2008,37(2):5-7.
    [2]周莉莉,黄亮,徐晓磊,等,HXJ158C型海洋修井机有限元计算与分析[J].石油机械,2013,41(6):63-67.
    [3]API Spec 4F,Drilling and well servicing structures[S].
    [4]宋德玉.可编程控制器原理及应用系统设计技术[M].北京:冶金工业出版社,2001.
    [5]高学仕,汪炳贵,王栋,等.HJJ450/45T型海洋井架动力特性分析[J].石油矿场机械,2009,38(5):38-41.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心