平面L形框剪结构剪力墙布置方案
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
建筑平面为L形的结构,由于其几何形状的不对称性,其剪力墙的合理布置一直是工程设计中的难点,在高烈度区更是如此。本文以平面L形框架-剪力墙结构为研究对象,通过分析软件PKPM和ETABS对所设计的结构进行建模及分析,讨论剪力墙的位置、数量和长度等对结构抗震性能的影响。计算结果表明:综合考虑剪力墙对结构扭转效应和剪力墙自身内力的控制,是进行平面L型框架-剪力墙结构剪力墙布置的先决条件,对结构设计具有重要意义。
Because of asymmetric flat shapes,the proper arrang em ent of shear walls in building structures with L-shaped plane is always a diffi culty in engineering design,especially in high intensity seismic zone.The arti cle focuses on frame-shear wall structures with L-shaped plane.Models are set up in PKPM and ETABS to study on the influence of location,number and length o f shear walls on the structural anti-seismic performance.The results show that the control of torsional effect and internal force of shear walls should be con sidered comprehensively,it's prerequisites for layouting of shear walls in the structure with L-shaped plane,which has great significance to structural design.
引文
[1]Anthony P Harasimowicz,Rakesh K Goel.Seismiccode analysis of multi-storey asymmetric buildings[J].Earthquake Engineering and Structural Dynam-ics,1998,27(2):173-185.
    [2]马升东,周德源.平面L形高层建筑的扭转效应分析及对策[J].结构工程师,2005,21(1):10-17.
    [3]JGJ3-2002,高层建筑混凝土结构技术规程[S].
    [4]徐培福,黄吉锋,韦承基.高层建筑结构在地震作用下的扭转振动效应[J].土木工程学报,2000,16(1):1-6.
    [5]方鄂华,程懋堃.关于规程中对扭转不规则控制方法的讨论[J].建筑结构,2005,35(11):12-15.
    [6]GB50011-2010,建筑抗震设计规范[S].
    [7]东南大学,同济大学,天津大学.混凝土结构与砌体结构设计[M].北京:中国建筑工业出版社,2005.
    [8]李国强,李杰,苏小卒.建筑结构抗震设计[M].北京:中国建筑工业出版社,2006.
    [9]方鄂华,钱稼如,叶列平.高层建筑结构设计[M].北京:中国建筑工业出版社,2007.
    [10]许燕禄.框-剪结构剪力墙平面布置对扭转的影响[J].广东土木与建筑,2005,(11):7-9.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心