海洋钻机井架振动检测及评估——以ZJ50/3150DB钻机为例
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
渤海某海洋平台配置的ZJ50/3150DB海洋钻机在钻井作业时井架振动幅度较大,为了评估井架在钻井作业时的安全性,对井架进行了振动检测,并建立了井架结构有限元模型,结合现场检测数据和模型计算结果分析井架振动对井架结构安全的影响。分别进行了井架固有频率检测、钻进作业工况井架幅频响应检测、井架振动幅值检测和井架振动加速度检测;依据井架图纸及现场井架实际情况,采用ANSYS软件建立了井架结构有限元模型。使用该模型计算出的井架第1阶固有频率为0.555 8 Hz,与现场检测结果较吻合,验证了模型的正确性。分析现场检测数据和模型计算结果发现:顶驱转速为36 r/min时,井架易发生共振;井架C型开口抗扭强度低;井架底座2个前撑杆为关键构件,其结构安全性影响整个井架安全;各种工况下的井架振动和顶驱通过二层台时引起的井架冲击振动均符合安全要求。
The rig derrick of a ZJ50/3150DB drilling rig in an offshore jacket platform located in the Bohai bay vibrates obviously when drilling.In order to assess the safety of the derrick when drilling,vibration test for the derrick was carried out and a finite element model of the derrick was built to analyze the impact of vibration on the derrick's structure safety,in combination of the field test data with the calculation results got using the model.Natural frequency,amplitude-frequency response when drilling,vibration amplitude and vibration acceleration of the derrick were tested.Based on the derrick drawing and field situation,the finite element model of the derrick structure was built using ANSYS software.The first-order natural frequency of the derrick calculated using the model was 0.555 8 Hz,which coincided with the filed test data and proved the validity of the model.The analysis of the field test data and the calculation results,show,the derrick is resonance-prone when the rotation speed of the top drive is 36 r/min,the derrick C-style opening has low torsional strength,the two front brace rods of the derrick substructure are crucial components that concern the derrick safety,and derrick vibrations under different working conditions and shock vibration happening when the top drive passing by the monkey board meet safety requirements.
引文
[1]刘习军.工程振动与测试技术[M].天津:天津大学出版社,1999.Liu Xijun.Engineering vibration and measurement technology[M].Tianjin:Tianjin University Press,1999.
    [2]张博.桥梁结构振动检测技术研究[J].建筑科技与管理,2011(8):20-22.Zhang Bo.Vibration detection of bridge structure[J].BuildingScientific Technology and Management,2011(8):20-22.
    [3]中国石化集团江汉石油管理局第四石油机械厂.ZJ50/3150DB海洋钻机产品使用说明书[M].荆州:中国石化集团江汉石油管理局第四石油机械厂,2009.SJ Petroleum Machinery Co.ZJ50/3150DB offshore drilling riguser’s manual[M].Jingzhou:SJ Petroleum Machinery Co.,2009.
    [4]胡军,张阳.坐底式平台地震响应谱分析[J].中国海洋平台,2008,23(6):51-55.Hu Jun,Zhang Yang.Earthquake response spectrum analysis of bottomsupported platform[J].China Offshore Platform,2008,23(6):51-55.
    [5]杨树耕,孟昭瑛,任贵永.有限元分析软件ANSYS在海洋工程中的应用[J].中国海洋平台,2000,15(2):41-44.Yang Shugeng,Meng Zhaoying,Ren Guiyong.Application of ANSYSin offshore engineering[J].China Offshore Platform,2000,15(2):41-44.
    [6]贾慧灵,颜廷俊,李向东,等.海洋钻机井架剩余承载能力测试和计算[J].石油矿场机械,2010(8):20-22.Jia Huiling,Yan Tingjun,Li Xiangdong,et al.Calculation ofremaining load capacity of derrick on offshore rig[J].Oil FieldEquipment,2010(8):20-22.
    [7]张浦阳,丁红岩.海上自升式钻井平台新型筒型桩靴承载力[J].石油勘探与开发,2011,38(2):237-242.Zhang Puyang,Ding Hongyan.Bearing capacity of the bucketspudcan foundation for offshore jack-up drilling platforms[J].Petroleum Exploration and Development,2011,38(2):237-242.
    [8]韩国有,刘金梅,周国强,等.基于海洋波浪脉动的海洋钻机井架结构试验模态识别[J].大庆石油学院学报,2009,33(1):60-64.Han Guoyou,Liu Jinmei,Zhou Guoqiang,et al.Experimental modalidentification of offshore drilling rig derrick structure based on theocean waves ripple[J].Journal of Daqing Petroleum Institute,2009,33(1):60-64.
    [9]American Petroleum Institute.API SPEC 4F-2008 Specification fordrilling and well servicing structures[S].Washington:AmericanPetroleum Institute,2008.
    [10]American Petroleum Institute.API RP 2A-WSD-2004 Recommendedpractice for planning,designing and constructing fixed offshoreplatforms-working stress design[S].Washington:AmericanPetroleum Institute,2004.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心