U型软钢阻尼器的设计及力学性能分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
文章提出了一种U型软钢阻尼器,并根据该阻尼器的受力特点,建立了相应的力学分析模型。同时,运用ANSYS有限元软件模拟了该阻尼器的滞回特性,获得了其主要力学性能参数,并与所建立的力学分析模型进行了对比分析,二者基本一致。从分析结果可以看出,本文所设计的U型软钢阻尼器具有良好的受力性能和理想的滞回耗能特性。
This paper supposes a U-shape low yield steel damper.Based on the mechanical behaviors of the damper,its analytical model is established.Meanwhile,the damper's hysteretic characteristics are numerically simulated by the FEM ANSYS to obtain the main mechanical parameters of this damper.These parameters are compared with the results from the established analytical model.Results indicate that the analytical model is agreeable to the FEM analysis.In addition,Analytical results also show that the U-shape low yield damper possesses superior mechanical behaviors and hysteretic characteristics to fit extremely for mitigating the vibration of engineering structures.
引文
[1]周锡元,阎维明,杨润林.建筑结构的隔震、减震和振动控制[J].建筑工程学报,2002,23(2):2-12.
    [2]周云好,孙业君.2011年1月1日江苏建湖地震的震源机制[J].防灾减灾工程学报,2011(1).
    [3]加藤晋平,可儿长英,龟田龙吉,等.免震建筑[M].北京:中国电力出版社,2009.
    [4]张瑞甫,翁大根,倪伟波,等.基于阻尼器反力墙体系的特大型LNG储罐控制研究[J].防灾减灾工程学报,2011,31(2):138-145.
    [5]欧进萍,何政,龙旭,等.振戎中学食堂楼耗能减震分析与设计(Ⅱ)-能力谱法与地震损伤性能控制设计[J].地震工程与工程振动,2001,21(1):115-122.
    [6]R.I.Skinner,J.M.Kelly&A.J.Heine.Hysteretic Dampersfor Earthquake-Resisstant Structures[J].Earthq Eng&StructDynamics,1975,3:287-296.
    [7]李钢.新型金属阻尼器减震结构的试验及理论研究[D].大连:大连理工大学,2006.
    [8]左晓宝,李爱群,黄镇,等.超弹性SMA复合阻尼器的计算模型及参数分析[J].振动工程学报,2005,18(2):161-165.
    [9]Laura Anania.Experimental Analysis and Analytical Mod-elling of An Innovative Elastic-Plastic Dissipation Devices forSeismic Protection of the Structures[A].12WCEE,2000.
    [10]J.B.Martin.塑性力学[M].北京:北京理工大学出版社,1990.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心