隔震结构基于位移的优化设计
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
探讨了基于位移的隔震优化设计方法及其实现形式,即通过在隔震层设置限位装置,直接采用目标位移作为设计值,由此明确了结构的目标性能,并确保能够最大限度地隔离和耗散地震传入结构的能量。通过一个实际工程的隔震优化设计表明,隔震结构的目标性能得到了改善,同时隔震器的特性也得到了充分利用。
Displacement-based optimal design method and its practices are discussed.That is,displacement-restriction devices are set in the isolation layer,target displacement is adopted as design value directly,then target performances of the structure are determined,and seismic energy input into the structure is reduced and dissipated in degree.Optimal design of an actual isolated structure indicates that target performances of the structure are improved,and characters of the isolators are fully used.
引文
1马宏旺,吕西林.建筑结构基于性能抗震设计的几个问题.同济大学学报,2002;(12):1429—1434
    2谢礼立,马玉宏.现代抗震设计理论的发展过程.国际地震动态,2003;(10):1—8
    3周福霖.工程结构减震控制.北京:地震出版社,1997
    4唐家祥,刘再华.建筑结构基础隔震.武汉:华中理工大学出版社,1993
    5建筑抗震设计规范(GB50011-2010).北京:中国建筑工业出版社,2010
    6福州市规划设计研究院,夏昌.隔震结构中隔震结构层极限位移的限制装置.GB201020166825.8,2010—8—27
    7党育,杜永峰,李慧.基础隔震结构设计及施工指南.北京:中国水利水电出版社,2007
    8刘秋芳.四川通济镇幼儿园基础隔震设计与分析.福建建筑.2010;(7):34—36

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心