Zn—22Al阻尼器在钢结构中的减震性能研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
探讨了超塑性Zn—22Al合金阻尼器的减震性能。以12层钢框架结构为算例,采用通用有限元分析软件AN-SYS,选用3条地震波,对结构有无安装超塑性Zn—22Al合金阻尼器板进行了动力时程反应分析。通过对比在罕遇地震下结构的层间位移角与层间剪力,得出这种阻尼器具有较好的减震性能,可用于结构减震。
The damping performance of superplastic Zn—22Al damper is studied in the paper.Taking a twelve-floor steel frame as example,this paper applies finite element software ANSYS10.0 to the frame whether has damper or not and conducts dynamic time-history analysis by putting three earthquake waves.Finally, by the comparison of the inter-story displacement and the inter-story shear,we can conclude that the damper has a better damping performance and can apply to structure earthquake mitigation.
引文
[1]吴卫国.形状记忆合金耗能器及其结构被动控制方法研究[D].西安建筑科技大学,2004,5.
    [2]Tsutomu Tanaka,等.Capability of superplastic forming in the seismic device using Zn–22Al eutectoid alloy[J].Scripta Materialia,2003,49.
    [3]周云.金属耗能减震结构设计[M].武汉理工大学出版社,2006.
    [4]朱春福.软钢阻尼器在钢框架结构中的减震效果分析[D].东北林业大学,2006,2.
    [5]张晖,朱伯龙,苏少军.悬挂结构层间减震控制系统试验分析[J].建筑结构学报,1997,18(5);59-65.
    [6]欧进萍,吴斌.摩擦与软钢屈服型耗能器的性能与减震效果的实验比较[J].地震工程与工程振动,1995,15(3):73-87.
    [7]吴桂霞.软钢阻尼器在钢框架结构中减震性能研究[D].河北农业大学,2008,6.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心