摘要
以一栋16层办公楼为工程背景,研究了层间隔震的不同隔震层位置对其减震效果的影响,使用CSI-ETABS三维非线性结构分析软件进行分析,得到了各不同隔震层位置对应的隔震后模态质量参与系数以及层间剪力、绝对加速度、层间位移角包络图。发现如果将隔震支座布置在基础隔震时的层间剪力最大层,同时限制住下部子结构层间剪力,将得到比较好的减震效果。
To investigate the influence of different isolation layer position on seismic re sponse,a 16-storey office building was built by the software of CSIETABS to do 3-D nonlinear structure analysis.The values of modal quality participate,inte rlaminar shear,absolute acceleration and envelope diagram of displacement-angl e between floors of seismic responses of various isolation layer position.The r esult shows it could get a better damping effect if we set the isolation layer i n the story which has maximum interlaminar shear layer when the structure baseisolated,and restrict lower substructure interlayer shear at the same time.
引文
[1]GB50011-2010,建筑抗震设计规范[S].
[2]唐家祥,刘再华.建筑结构基础隔震[M].武汉:华中理工大学出版社,1997.
[3]祁皑,林云腾,郑国琛.层间隔震结构工作机理研究[J].地震工程与工程振动,2006,26(4):239-243.
[4]祁皑.层间隔震技术评述[J].地震工程与工程振动,2004,24(6):114-120.
[5]周福霖,张颖,谭平.层间隔震体系的理论研究[J].土木工程学报,2009,42(8):1-8.
[6]徐忠根,周福霖,丘湘泉.汕头博物馆结构动力分析[J].世界地震工程,1996,(2):33-36.
[7]王丽红,赵龙珠,张立柱.基础隔震结构与层间隔震结构隔震效果对比[J].辽宁师专学报,2003,(3):71-72.
[8]李向真,欧海龙,林舒.层间隔震结构计算模型的简化分析[J].地震工程与工程振动,2002,22(1):121-125.
[9]施卫星,王群.层间隔震原理和设计方法[J].工程抗震,1997,(4):20-22.
[10]吴建乔,施卫星,王群.旧房改造中的层间隔震方法[J].上海建设科技,1997,(3):43-44.
[11]赵昕,李杰.层间隔震结构隔震垫的有限元模拟[J].建筑结构,2001,31(11):66-68.