海洋检波器性能测试仪信号源的设计
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
测试仪是用来检测检波器各项性能参数,以便准确地确定检波器的好坏。文中对检波器测试仪的信号源电路进行了具体的分析与设计,采用单片机和AD9850芯片,组成电路简单,但频率、幅度和波形都具有较高精度且利用TDA7261芯片可以进行功率放大的信号源,输出波形参数可以在编程时设定,能满足一些特定场合的需要。
The Hydrophone Performance Tester is used to test its performance of parameters so as to ascertain whether it is in good condition or not.This paper has carried on the concrete analysis and the design to the signal source of hydrophone performance tester.By using micro controller and AD9850 chip,we can build up a simple sig-nal source whose frequency,amplitude and waveform are precise and by using Chip TDA7261 it can amplifier the power.Wave parameters can be programmed in advance and the circuit can satisfy some special requirements.
引文
[1]罗福龙,易碧金.地震检波器技术及应用[J].物探装备,2005,15(1):6-14.
    [2]单成祥.传感器的理论与设计基础及其应用[M].北京:国防工业出版社,1999:260-265.
    [3]石雄.125MHz时钟DDS频率合成器AD9850的原理与应用[J].力源电子工程,2000,14(2):114-117.
    [4]Analog Devices Inc.CMOS 125 MHz Complete DDS Synthesizer Data Sheet[Z],1999.
    [5]石雄.DDS芯片AD9850的工作原理及其与单片机的接口[J].国外电子元器件,2001(5):20-24.
    [6]陈冬云,杜敬仓,任柯燕,等.ATmega128单片机原理与开发指导[M].北京:机械工业出版社,2005:292-304.
    [7]何立民.单片机高级教程(应用与设计)[M].北京:北京航空航天大学出版社,2000:7-10.
    [8]高卫东.AD9850 DDS芯片信号源的研制[J].实验室研究与探索,2000,10(5):10-13.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心