变电站配电楼的隔震设计
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
某330kV变电站中的110kV配电楼位于8度地震设防区,为单层钢筋混凝土框架结构,局部二层。在地下室与上部结构之间设置隔震层。对隔震支座的选型、改型及布置方案进行了研究,并提出了有益的建议。配电楼主体结构空间模型的时程分析结果表明,采用隔震措施不但可以显著降低上部结构的地震反应,同时降低了其内电气设备的地震反应。该工程即将竣工并投入使用。该工程为隔震技术在电力系统的更广泛应用提供了一个良好的实例。
The base isolation technology is firstly used in substation of switch building.The selection,remodeling and layout of the base isolation bearer of a switch building in Xi'an are researched,and some useful advices are given.The time history analysis results of the structural space model show that the earthquake responses of the upper structure and the electrical equipments inside the building are diminished remarkably.The research provides a goof base for the wide use of the isolation technology in electric system.
引文
[1]李天等.电力系统地震灾害分析.世界地震工程,2000,16(4).
    [2]日本免震构造协会编.叶列平译.图解隔震结构入门.北京:科学出版社,1998.
    [3]唐家祥,刘再华.建筑结构基础隔震.武汉:华中理工大学出版社,1993.
    [4]武田寿一主编,纪晓惠等译.建筑物隔震.防振与控振.北京:中国建筑工业出版社,1997.
    [5]SAP2000 Linear and Nonlinear Static and Dynamic Analysis andDesign of Three-Dimensional Structures.Computer and Structure,Inc.Berkeley,California,2002.
    [6]建筑抗震设计规范GB50011—2001.北京:中国建筑工业出版社,2001.
    [7]文波.隔震技术在变电建筑物中的应用研究.硕士学位论文,西安理工大学,2004.
    [8]电力设施抗震设计规范(GB50260—96).北京:中国建筑工业出版社,1996.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心