Extraction of phenolic compounds from water samples by dispersive micro-solid-phase extraction

详细信息    查看全文

• 作者：Shirin Babaee and Ali Daneshfar
• 刊名：Journal of Separation Science
• 出版年：2016
• 出版时间：July 2016
• 年：2016
• 卷：39
• 期：13
• 页码：2508-2516
• 全文大小：757K
• ISSN：1615-9314

文摘

In this article, the use of magnetically separable sorbent polyaniline/silica-coated nickel nanoparticles is evaluated under a dispersive micro-solid-phase extraction approach for the extraction of phenolic compounds from water samples. The sorbent was prepared by in situ chemical polymerization of aniline on the surface of silica-modified nickel nanoparticles and was characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray spectrometry, and vibrating sample magnetometry. Effective variables such as amount of sorbent (milligrams), pH and ionic strength of sample solution, volume of eluent solvent (microliters), vortex, and ultrasonic times (minutes) were investigated by fractional factorial design. The significant variables optimized by a Box–Behnken design were combined by a desirability function. Under the optimized conditions, the calibration graphs of analytes were linear in a concentration range of 0.02–100 μg/mL, and with correlation coefficients more than 0.999. The limits of detection and quantification were in the ranges of 10–23 and 33–77 μg/L, respectively. This procedure was successfully employed in the determination of target analytes in spiked water samples; the relative mean recoveries ranged from 96 to 105%.