Investigating the effect of multi-functional chain extenders on PLA/PEG copolymer properties

详细信息    查看全文

• 作者：Mustafa Abu Ghalia ; Yaser Dahman ; ^{ydahman@ryerson.ca}
• 关键词：Polycondensation ; Poly (lactic acid) ; Poly (ethylene glycol) ; Liquid chain extender
• 刊名：International Journal of Biological Macromolecules
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：95
• 期：Complete
• 页码：494-504
• 全文大小：3256 K
• 卷排序：95

文摘

Biodegradable copolymers polylactic acid-co-poly ethylene glycol (PLA-co-PEG) were synthesized at a specific volume ratio (PLA/PEG) (80/20) using direct melt polycondensation without solvent. The effects of an oligomeric chain extender (CE) on the mechanical, molecular weight, thermal stability, and degradation were evaluated. The copolymers were tailored by introducing classes of CE contents (0.25, 0.5, 0.075, 1.0, 1.25, and 1.5 wt%) (styrene- glycidyl acrylate copolymer). Apparently, the mechanical properties of copolymers were enhanced in the presence of CE. A long chain branch structure has led to a slight improvement of tensile strength to reach 70 MPa at CE 1.25%, compared with 60 MPa for neat PLA. A significant increase of 17% was observed for the elongation at break of copolymers after addition of CE 1.25%. In addition, the impact strength increased to 7.9 KJ/m2 in the ranges of CE 1–1.25%. Melt flow index dramatically reduces with the addition of CE contents. Gas Permeation Chromatography (GPC) showed that the addition of CE 1.25% has resulted in increasing the PLA molecular weight to 132.569 kDa with a broad molecular weight distribution, MWD (2.066), and bimodal distribution. Differential Scanning Calorimetric (DSC) results revealed that the chain extension process improved glass transition temperature (Tg) 62 °C, melting temperature (Tm) 161 °C, and crystallinity (X%) 34.9% as a result of CE 1.25%. Thermal gravimetric analyses (TGA) results indicated that the CEs have a positive effect on the enhancement of thermal stability. Moreover, Scanning Electron Microscopic (SEM) showed that the compatibility and interfacial adhesion between the PLA and PEG chains were enhanced in the existence of the CE contents. The weight loss of the copolymer during 30 days of degradation time was 28%, while the weight loss of CE 1.5% was only 3% during the same time interval.