Development of an ITER prototype disruption mitigation valve
详细信息 查看全文
- 作者：G. Czymek
- 关键词：ITER ; Valve ; Disruption mitigation ; Design ; Development ; Dynamic analysis
- 刊名：Fusion Engineering and Design
- 出版年：2015
- 出版时间：October 2015
- 年：2015
- 卷：96-97
- 期：Complete
- 页码：624-628
- 全文大小：2332 K
文摘
- •
An ITER-DMV prototype for 100 bar, D = 80 mm, opening time 3.5 ms, is ready for fabrication.
- •
The vacuum part is sealed against the working gas by stainless steel bellows for 110 bar.
- •
The conical Laval gas outlet allows maximal mass flow rate.
- •
The eddy current drive turn ratio was optimized for low tilting moment.
- •
Polyimide is used for the head sealing, the decelerator and for the bearing of the guide tube.