Technical note: Computer-manufactured inserts for prosthetic sockets
详细信息 查看全文
- 作者：Joan E. Sanders ; jsanders@uw.edu" class="auth_mail" title="E-mail the corresponding author ; jsanders@u.washington.edu" class="auth_mail" title="E-mail the corresponding author ; Jake B. McLean jakemc@uw.edu" class="auth_mail" title="E-mail the corresponding author ; John C. Cagle jcagle@uw.edu" class="auth_mail" title="E-mail the corresponding author ; David W. Gardner davidg87@uw.edu" class="auth_mail" title="E-mail the corresponding author ; Katheryn J. Allyn kate@allyn.org" class="auth_mail" title="E-mail the corresponding author
- 关键词：Amputee ; Trans-tibial ; Volume loss ; Accommodation ; CAD/CAM ; Residual limb ; Socket
- 刊名：Medical Engineering & Physics
- 出版年：2016
- 出版时间：August 2016
- 年：2016
- 卷：38
- 期：8
- 页码：801-806
- 全文大小：1176 K
文摘
- •
A technique is described for computer manufacturing solid, plastic, socket inserts.
- •
Inserts settled into the sockets over time the prosthesis was worn.
- •
Fabrication quality after 4 weeks of use averaged less than 0.03 mm radial error.
- •
Incorporating insert design into prosthetic software packages may be useful.