URANS prediction of roll damping for a ship hull section at shallow draft

详细信息    查看全文

• 作者：Burak Yıldız ; Ferdi Çakıcı ; Toru Katayama…
• 关键词：Roll damping ; Shallow draft ; URANS ; Ikeda’s method
• 刊名：Journal of Marine Science and Technology
• 出版年：2016
• 出版时间：March 2016
• 年：2016
• 卷：21
• 期：1
• 页码：48-56
• 全文大小：1,772 KB
• 参考文献：1.Ikeda Y, Himeno Y, Tanaka N (1978) A prediction method for ship roll damping. Report of the Department of Naval Architecture, University of Osaka Prefecture, no. 00405
  2.Himeno Y (1981) Prediction of ship roll damping-state of the art. U. Michigan Department of Naval Architecture and Marine Engineering, Report 239
  3.Yeung R, Ananthakrishnan P (1992) Oscillation of a floating body in a viscous fluid. J Eng Math 26:211–230CrossRef MathSciNet MATH
  4.Bonfiglo L, Brizzolara S, Chryssostomidis C (2011) Added mass and damping of oscillating bodies a fully viscous numerical approach. Recent Adv fluid Mech Heat Mass Transf Biol, pp 210–215
  5.Henning HL (2011) Investigation of the heave, sway and roll motions of typical ship like hull sections using rans numerical methods. Master thesis, University of Stellenbosch
  6.Bangun EP, Wang CM, Utsunomiya T (2010) Hydrodynamic forces on a rolling barge with bilge keels. Appl Ocean Res 32:219–232CrossRef
  7.Yago K, Ohkawa Y, Chuji T, Utsunomiya T (2008) Experimental study on viscous damping force of box-shaped body with fin. J Soc Nav Archit Japan
  8.Paap M (2005) Verification of cfd calculations with experiments on a rolling circular cylinder with bilge keels in a free surface. Master thesis, Delft University of Technology and Bluewater Energy Services
  9.Yang B, Wang ZC, Wu M (2012) Numerical simulation of naval ships roll damping based on cfd. Procedia Eng 37:14–18CrossRef
  10.Irvine M, Longo J, Stern F (2004) Towing tank tests for surface combatant for free roll decay and coupled pitch and heave motions. In: Proceedings of the 25th symposium on naval hydrodynamics
  11.Wilson R, Carrica PM, Stern F (2006) Unsteady RANS method for ship motions with application to roll for a surface combatant. Comput Fluids 35:501–524CrossRef MATH
  12.Irvine M (2004) Towing tank tests for surface combatant for coupled pitch and heave and free roll decay motions. Doctorial thesis, University of Iowa. The Graduate College of the University of Iowa
  13.Sadat-Hosseini H, Stern F, Olivieri A, Campana EF, Hashimoto H, Umeda N, Bulian G, Francescutto A (2010) Head-wave parametric rolling of a surface combatant. Ocean Eng 37:859–878CrossRef
  14.Gao Q, Vassalos D (2011) Numerical study of the roll decay of intact and damaged ship. In: Proceedings of the 12th international ship stability workshop, pp 277–282
  15.Bassler CC (2013) Analysis and modeling of hydrodynamic components for ship roll motion in heavy weather. PhD. thesis, Virginia Polytechnic Institute and State University
  16.Katayama T, Yıldız B, Umeda J (2014) Numerical estimation and validation of shallow draft effect on roll damping. In: Proceedings of the 14th international ship stability workshop, pp 204–209
  17.Tanaka N, Himeno Y, Ikeda Y, Isomura K (1981) Experimental study on bilge-keel effect for shallow-draft ship. J Kansai Soc Nav Archit 180:69–75
  18.Katayama T, Yoshioka Y, Kakinoki T, Ikeda Y (2010) Some topics for estimation of bilge-keel component of roll damping. In: Proceedings of the 11th international ship stability workshop, pp 225–230
  19.Spouge JR (1988) Non-Linear analysis of large amplitude rolling experiments. Int Shipbuild Prog 403:271–320
  20.Handschel S, Kollisch N, Soproni JP, Abdel-Maksoud M (2012) A numerical method for estimation of ship roll damping for large amplitudes. In: 29th symposium on naval hydrodynamics, Sweeden
  21.Jaouen F, Koop A, Vaz G (2011) Predicting roll added mass and damping of a ship hull section using cfd. In: Proceedings of ASME 30th international conference on ocean, Offshore and Arctic Engineering, Netherlands
  
• 作者单位：Burak Yıldız (1)
  Ferdi Çakıcı (1)
  Toru Katayama (2)
  Hüseyin Yılmaz (1)
  
  1. Faculty of Naval Architecture and Maritime, Yildiz Technical University, Istanbul, Turkey
  2. Graduate School of Engineering, Osaka Prefecture University, Sakai, Japan
  
• 刊物类别：Engineering
• 刊物主题：Automotive and Aerospace Engineering and Traffic
  Engineering Fluid Dynamics
  Engineering Design
  Offshore Engineering
  Mechanical Engineering
  
• 出版者：Springer Japan
• ISSN：1437-8213

文摘

It is analytically difficult to calculate roll damping of ships due to the effects of viscosity. Therefore, computational fluid dynamics (CFD) has become a powerful tool in predicting roll damping recently. The unsteady flow around a forced rolling hull section with bilge keels can be calculated using a commercial URANS code which includes the viscous effects. In this study, two-dimensional (2D) roll damping calculations for a S60 midsection with bilge keels including free surface effects are performed for shallow draft case. The first objective of the study is to show whether the URANS code can be used to predict roll damping coefficient correctly. The second one is to show why Ikeda’s estimation method is insufficient at shallow draft case. Sinusoidal forced roll motion calculation method of roll damping moment with the help of a sliding interface and a fixed roll axis is successfully applied to predict roll damping coefficient. The calculations are carried out for different roll motion periods and amplitudes to validate the accuracy of the URANS code for different cases. Numerical results are compared with experiments, which were carried out at the towing tank facility of Osaka Prefecture University (OPU), and Ikeda’s estimation method. The results show that the URANS code is capable of predicting roll damping coefficients in a good agreement with experimental results and can be used further to develop a better model for prediction of roll damping.