摘要
针对基于三轴云台的飞行仿真器定位控制精度考核,设计了验证试验方案,采用全站仪进行目标点位空间位置坐标测量。利用缩比飞行轨迹进行模拟,模拟验证结果表明,试验方案设计合理,试验结果精度较高,满足使用要求。
In order to assess the positioning control precision of the flight simulator based on the triaxial cloud terrace,the test plan was designed,and the spatial position coordinate of the target point was measured by using the electronic total station. The simulation was achieved via the proportionally compressed trajectory. The simulation results under the test plan show that the design of this plan is reasonable,and that the precision of the experimental result data is high satisfying the usage requirement.
引文
[1]周海银,李董辉,蒋月评.基于多源信息融合的飞行器高精度定位方法[J].湖南大学学报(自然科学版),2007,34(4):37-40.
[2]郭军海,赵华.一种运载火箭上升段轨迹的高精度确定方法[J].宇航学报,2015,36(9):1018-1023.
[3]王正明,易东云,周海银,等.弹道跟踪数据的校准与评估[M].长沙:国防科技大学出版社,1999.
[4]石博程.飞机运动仿真平台控制系统研究[D].长春:长春理工大学,2011.
[5]赵立荣,柳玉晗,曹永刚,等.多传感器光电经纬仪提高测量精度的方法[J].仪器仪表学报,2011,32(6):1-5.
[6]魏超,张慧娟,李冬.一种连续波系统测速时间误差的自适应修正方法[J].兵器装备工程学报,2017,38(8):41-44.
[7]宋春华.数控技术的现状及发展趋势[J].装备制造技术,2011(3):114-117.
[8]路平,刘凯,王龙.三轴飞行仿真转台控制系统设计[J].传感器与微系统,2016,35(9):110-113.
[9]蔡大伟.伺服控制在飞行仿真转台的应用[J].智能机器人,2016(8):72-74.
[10]曾科军.基于西门子808D数控系统的空中飞行仿真器研制[D].大连:大连理工大学,2017.