摘要
详细阐述压电贾卡经编机控制系统核心组成部分的工作原理及基本结构,通过分析现有压电贾卡经编机控制系统中存在的问题,给出对应的解决方案,即改变控制系统中中继板的连接方式,由串行改为星型。实际的应用结果显示,文中提出的解决方案能够大幅度改善压电贾卡经编机现有设计中存在的问题,可以为此类设计提供思路与方法。
The working principle and basic structure of the core components of control system of piezoelectric Jacquard warp knitting machine are introduced in detail. The existed problems are analyzed, and the corresponding solution which is to change the link mode of the relay board in the control system from serial to star type is proposed. Based on the practical application results, it shows that the solution worked out in this paper can effectively tackle the existed problems in the design of piezoelectric jacquard warp knitting machine, which can provide some useful ideas and methods for such design.
引文
[1]江建君,蒋高明,夏风林.经编压电贾卡系统工作原理探讨[J].针织工业,2009(3):23-25.
[2]张琦,蒋高明,夏风林.经编机数控系统关键技术及其发展[J].纺织导报,2013(4):77-80.
[3]程龙,蒋高明.RSJ4/2F型贾卡经编机提花原理及其工艺设计[J].针织工业,2014(10):15-18.
[4]孙嘉良.压电贾卡梳控制驱动系统:中国,201110033921.4[P].2012-12-05.
[5]孙嘉良.一种电子贾卡经编机:中国,201120034022.1[P].2011-11-02.
[6]重庆胜普昂凯科技有限公司.一种控制经编机压电贾卡提花装置运动的驱动电路板:中国,201220335953.X[P].2013-01-30.
[7]福建宏宇电子科技有限公司.一种用于压电陶瓷贾卡梳的双电源双向驱动电路:中国,201610520697.4[P].2018-05-22.
[8]李开霞,叶晓东,花加丽.基于ATmega128单片机的压电式贾卡控制系统设计[J].现代电子技术,2009(17):211-214.