摘要
获得最大发电净功率是余热发电系统设计的主要目标之一。建立一个以低温烟气为热源的余热发电模型,研究得出影响系统净输出功率的2个主要因素:系统余热回收量和余热锅炉排烟温度,其中,系统余热回收量即余热取热区域对系统优化具有关键作用。
To obtain maximum net power is the aim of waste heat power generation system design. A model is built to study the waste heat power generation of low temperature flue gas. The results show that the two main influence factors on net power output of the generation system are the total recovery amount of waste heat and the exhaust temperature of HRSG, while the total recovery amount of waste heat is key to system optimization.
引文
[1]张文芳.烟气余热利用过程的建模与控制[D].北京:华北电力大学,2012.
[2]赵斌,徐鸿,路晓雯等.烧结余热发电系统的热力学分析和系统优化[J].华北电力大学学报,2010,37(3):43-48.
[3]李志伟,张波,何红舟等.1200t/d玻璃窑余热发电系统运行参数选型[J].电站系统工程,2013,29(3):79-81.
[4]张欣,温治,楼国锋等.高温烧结矿气-固换热过程数值模拟及参数分析[J].北京科技大学学报,2011,33(3):339-345.
[5]陈春霞.钢铁生产过程余热资源的回收与利用[D].沈阳:东北大学,2008.
[6]高杨,沈永兵,刘建虎.烧结环冷机烟气余热特性研究[J].冶金能源,2015,34(2):57-60.