检测实验室仪器设备计量分类管理标准初探
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Primary Research on Metrology-Classified Management Standard on Equipment and Instruments in Testing Laboratory
  • 作者:张剑 ; 魏利伟 ; 李坤威 ; 刘俊华
  • 英文作者:ZHANG Jian;WEI Li-wei;LI Kun-wei;LIU Jun-hua;China national institute of standardization;
  • 关键词:检测实验室 ; 仪器设备 ; 分类管理
  • 英文关键词:testing laboratory;;equipment and instruments;;classified management
  • 中文刊名:SJBZ
  • 英文刊名:Standard Science
  • 机构:中国标准化研究院;
  • 出版日期:2016-06-16
  • 出版单位:标准科学
  • 年:2016
  • 期:No.505
  • 基金:2015年中央基本科研项目“气相色谱仪稳定性确认关键技术研究”(项目编号:222015Y-4006)资助
  • 语种:中文;
  • 页:SJBZ201606016
  • 页数:4
  • CN:06
  • ISSN:11-5811/T
  • 分类号:70-73
摘要
本文通过分析国内和国外检测实验室仪器设备计量管理的现状,探索性提出了我国检测实验室仪器设备计量分类管理标准的原则、方法和内容。初步将提出的分类管理标准应用于实践,为检测实验室仪器设备的标准化、规范化管理提供依据。
        This paper analyzes the development of the Chinese and foreign standards on metrology-classified management of equipment and instruments in testing laboratory. Through the analysis, it proposes the principles, methods and contents for metrology-classified management standard on equipment and instruments in China's testing laboratories. The metrology-classified management standard on equipment and instruments is established and used in practice, which provides the basis of standardized management.
引文
[1]国家质量监督检验检疫总局.JJG 1001-2011通用计量术语及定义技术规范[S].北京:中国质检出版社,2012.
    [2]陈进.刍议检测实验室的标准化管理[J].标准科学,2009,07:41-43.
    [3]中华人民共和国计量法[Z].中华人民共和国国务院公报,1985,26:883-887.
    [4]中华人民共和国强制检定的工作计量器具检定管理办法[Z].中华人民共和国国务院公报,1987,10:349-352.
    [5]European Parliament.Measuring instruments Directive2004/22/EC[Z].Official Journal,2004,L135:1-80.
    [6]袁先富.美国的法制计量管理[J].工业计量,1994,03:22.
    [7]国家认证认可监督管理委员会.检验检测机构资质认定评审准则[S].北京:中国质检出版社,2015.
    [8]中国合格评定国家认可委员会.GB/T 27025-2008检测和校准实验室能力的通用要求[S].北京:中国质检出版社,2008.
    [9]WHO.WHO Technical Report Series[M].No 967.Switzerland:WHO Press,2010:81-129.
    [10]USP(34),Vol I[S].2011:550-553.
    [11]EP(7.0),Vol I[S].2010:13-18.
    [12]孙中泉,文建国,郑伟.关于“检定”和“校准”术语的辨析与应用研究[J].标准科学,2014,03:66-68.
    [13]王兵部.谈检测实验室的质量监督工作[J].标准科学,2015,01:87-90.