电动汽车用永磁同步电机性能参数仿真
|
摘要
对某电动汽车用PMSM的驱动性能参数进行匹配,利用Motor-CAD软件建立永磁同步电机模型。通过E-mag模块与Terminal模块对PMSM模型进行磁热耦合仿真,并建立Lab模块参数的边界和损耗模型,对仿真出的工况工作点分布数据与实际样件标定数据对比,得出需求数据的优化方向,为纯电动汽车动力、经济性能需求指标提升提供参考。
Matching the driving performance parameters of PMSM for an electric vehicle,and using motorCAD software to establish PMSM model. The magneto-heat coupled simulation of the PMSM model through the E-mag module and the terminal module,and established the boundary and loss model of the Lab module parameters. Comparing the distribution data of working conditions simulated with actual sample calibration data,and obtained the optimization direction of demand data,and provided reference for upgrading the demand indicators of power and economic performance of EV.
Matching the driving performance parameters of PMSM for an electric vehicle,and using motorCAD software to establish PMSM model. The magneto-heat coupled simulation of the PMSM model through the E-mag module and the terminal module,and established the boundary and loss model of the Lab module parameters. Comparing the distribution data of working conditions simulated with actual sample calibration data,and obtained the optimization direction of demand data,and provided reference for upgrading the demand indicators of power and economic performance of EV.
引文
[1]Wallace R R,Tapia J A,Moran L A.Electromagnetical Design of Surface Mounted P M Axial-flux Synchronous Motors[C].International Symposium on Power Electronics,Electrical Drives,Automation and Motion,2010:124-129.
[2]Xie Ying,Wang Yunyuan.3D Temperature Fied Analysis of the Induction Motors with Broken Bar Fault[J].Applied Thermal Engineering,2014,66(1-2):25-34.
[3]熊会元,吴小元,宗志坚,等.性能需求驱动的电动汽车动力系统参数优化[J].华南理工大学学报,2016,44(3):70-74.
[4]杨文兴.纯电动汽车动力系统匹配设计与仿真研究[D].兰州:兰州理工大学,2014.
[5]张斌.电动汽车永磁同步驱动电机电磁热设计研究[D].武汉:华中科技大学,2015.
[6]朱彩虹.基于Ansoft的永磁无刷直流电动机磁场有限元分析[J].微电机,2010,43(6):103-105.
[7]陆海斌,等.电动汽车用PMSM的设计与研究[J].汽车电器,2014,12(8):32-33.
[8]安忠良,徐作为,等.异步起动永磁同步电机铁耗分析及计算[J].微电机,2016,49(5):7-10.
[9]谢颖,王泽,单雪婷,等.基于多场量的笼型感应电机三维瞬态磁热固耦合计算分析[J].中国电机工程学报,2016,36(11):3078-3079.
[10]王俊杰,马恩林.无铁心盘式PMSM损耗和温度研究[J].鱼雷技术,2015,23(5):360-362.
[11]邰永,刘永淼.感应电机全域三维瞬态温度场分析[J].中国电机工程学报,2010,30(30):114-120.
[12]Blau P J.Friction science and technology:from concepts to applications[M].2nd ed.Boca Raton:CRC Press,2008.
[13]王晓远,高鹏.永磁轮毂电机三维磁热耦合分析[J].微电机,2015,48(4):8-9.
[2]Xie Ying,Wang Yunyuan.3D Temperature Fied Analysis of the Induction Motors with Broken Bar Fault[J].Applied Thermal Engineering,2014,66(1-2):25-34.
[3]熊会元,吴小元,宗志坚,等.性能需求驱动的电动汽车动力系统参数优化[J].华南理工大学学报,2016,44(3):70-74.
[4]杨文兴.纯电动汽车动力系统匹配设计与仿真研究[D].兰州:兰州理工大学,2014.
[5]张斌.电动汽车永磁同步驱动电机电磁热设计研究[D].武汉:华中科技大学,2015.
[6]朱彩虹.基于Ansoft的永磁无刷直流电动机磁场有限元分析[J].微电机,2010,43(6):103-105.
[7]陆海斌,等.电动汽车用PMSM的设计与研究[J].汽车电器,2014,12(8):32-33.
[8]安忠良,徐作为,等.异步起动永磁同步电机铁耗分析及计算[J].微电机,2016,49(5):7-10.
[9]谢颖,王泽,单雪婷,等.基于多场量的笼型感应电机三维瞬态磁热固耦合计算分析[J].中国电机工程学报,2016,36(11):3078-3079.
[10]王俊杰,马恩林.无铁心盘式PMSM损耗和温度研究[J].鱼雷技术,2015,23(5):360-362.
[11]邰永,刘永淼.感应电机全域三维瞬态温度场分析[J].中国电机工程学报,2010,30(30):114-120.
[12]Blau P J.Friction science and technology:from concepts to applications[M].2nd ed.Boca Raton:CRC Press,2008.
[13]王晓远,高鹏.永磁轮毂电机三维磁热耦合分析[J].微电机,2015,48(4):8-9.