摘要
目前多数燃煤电厂未进行入炉煤元素碳的实测工作,原煤燃烧的碳排放因子多采用《省级温室气体清单编制指南(试行)》提供的缺省值。以某电厂为例,选定机组设计煤种、校核煤种,分别采用原煤排放因子缺省值和实测值计算碳排放量,进一步分析了供电碳排放强度,结果差异较大,可为燃煤发电企业的碳排放监测提供分析参考。
At present,most coal-fired power plants have not carried out the carbon elemental measuring work on coal as fired. The carbon emission factor of raw coal is mostly based on the default value provided by Guidelines of Provincial Greenhouse Gas Inventories( trial). Taking a power plant as an example,choosing design coal and check coal,the default value and the measured value of the raw coal emission factor are taken into consideration respectively,and the carbon emission intensity of power supply is further analyzed. The results differ greatly,which can provide reference for carbon emission monitoring of coal-fired power generation enterprises.
引文
[1]郑彦强,李黎,李小利,等.电厂温室气体排放核算案例及问题分析[J].能源与节能,2015(10):101-102.
[2]国家发展和改革委员会.中国发电企业温室气体排放核算方法与报告指南(试行)[Z]. 2013.
[3]火力发电厂除灰设计规程:DL/T 5142—2012[S].
[4]火力发电厂技术经济指标计算方法:DL/T 904—2015[S].
[5]蒋明昌.火电厂能耗指标分析手册[M].北京:中国电力出版社,2010:379.