浅槽重介分选机分选下限和重介悬浮液上升流速度关系的研究
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Study of the shallow-bath heavy medium separator′s lower size limit of separation in relation to medium suspension upward flow velocity
  • 作者:姚学斌 ; 史冰森
  • 英文作者:YAO Xuebin;SHI Bingsen;Maliantai Coal Preparation Plant, Ningxia Baofeng Coal Co.Ltd.;Tiandi (Tangshan) Mining Technology Co.Ltd.;Hebei Province Coal Preparation Engineering & Technology Research Center;
  • 关键词:浅槽重介分选机 ; 数值模拟 ; 分选下限 ; 上升流速度
  • 英文关键词:shallow-bath heavy medium separator;;numerical simulation;;lower size limit of separation;;upward flow velocity
  • 中文刊名:XMJS
  • 英文刊名:Coal Preparation Technology
  • 机构:宁夏宝丰能源马莲台洗煤厂;天地(唐山)矿业科技有限公司;河北省煤炭洗选工程技术研究中心;
  • 出版日期:2019-04-25
  • 出版单位:选煤技术
  • 年:2019
  • 期:No.273
  • 语种:中文;
  • 页:XMJS201902003
  • 页数:6
  • CN:02
  • ISSN:13-1115/TD
  • 分类号:14-19
摘要
利用ANSYS FLUENT软件对浅槽重介分选机内部的液-固多相流系统进行数值模拟,通过引入150~6 mm的颗粒,利用耦合离散相模型对颗粒在槽体内部的运动轨迹进行研究。研究表明,改变上升流速度的大小,测定颗粒在X方向、Y方向上位移大小的差异,从而得出浅槽重介分选机中悬浮液上升速度和分选下限的关系。
        Numerical simulation is made of the liquid-solid multiphase flow system in the shallow-bath heavy medium separator using the software ANSYS FLUENT. After introduction of the 150~6 mm particles into the separator, the trajectory of the motion of the particles in the bath is investigated with the use of the coupled discrete-phase model. Through measurement of the different displacements of particles in the X-direction and the Y-direction when the medium suspension varies inupward flow velocity, the relationship between the separator′s lower size limit of separation and the medium suspension upward flow velocity is derived.
引文
[1] 建瑞革.动力煤选煤厂的选煤工艺设计[J].煤炭工程,2012:33-35.
    [2] 李晓军.济三选煤厂浅槽选矸作业入料粒度下限的探讨[J].煤炭加工与综合利用,2014(7):40-42.
    [3] 张毅勤.炼焦煤选煤厂机械选矸作业入料粒度下限的探讨[J].选煤技术,2014(2):65-67,71.
    [4] 王金龙,张立生.块煤重介浅槽工艺降低入洗下限探索[Z].中国北京:2014.
    [5] 班海俊.李家壕选煤厂降低重介浅槽入洗下限的工业试验研究[J].煤炭加工与综合利用,2017(5):25-32.
    [6] 黄亚飞.降低浅槽重介分选机入料粒度下限的探讨[J].选煤技术,2017(2):56-58.
    [7] 王祖瑞.重介质选煤的理论与实践[M].北京:煤炭工业出版社,1988-11:285-290.
    [8] 李大虎,程相锋,朱学帅,等.重介质悬浮液粘度预测及应用[J].煤炭工程,2016(11):120-123.