摘要
随着SiC_p/Al复合材料应用的日益广泛,其焊接技术也成为热点。从合金化元素入手,介绍了国内外集中适用于SiC_p/Al复合材料的原位焊接技术,主要是钛、镍、锌等元素作为合金化元素进行原位焊接的研究现状与焊接的难点。
With the increasing application of SiC_p/Al composites,the welding technology has become a hot spot.From the perspective of alloying elements,the concentrated applicable in-situ welding technology for SiC_p/Al composites is China and abroad was introduced.The research status and difficulties of in-situ welding with titanium,nickel and zinc as alloying elements were introduced.
引文
[1]桂满昌,王殿斌,张洪.颗粒增强铝基复合材料在汽车上的应用[J].机械工程材料,1996,20(5):30-33.
[2]张国定,赵昌正.金属基复合材料[M].上海:上海交通大学出版社,1996.
[3]Zhang H T, Cao J, Lu H.Reactive brazing of aluminium to aluminium-based composite reinforced with alumina borate whiskers with Cu interlayer[J].Vacuum,2010,84:474-477.
[4]张德库,牛济泰,于秀宇.铝基复合材料激光焊工艺参数对焊缝成表和熔深的影响[J].哈尔滨工业大学学报,2002,34(2):152-155.
[5]雷玉成,朱飞,袁先进,等.Si Cp/6061Al基复合材料等离子弧焊工艺参数对焊缝组织及性能的影响[J].焊接学报,2007,28(4):46-48.
[6]李贤.Si Cp/6061Al基复合材料等离子弧原位焊接工艺与合金化机理研究[D].镇江:江苏大学,2007:47-48
[7]陈彦宾,张德库,牛济泰,等.激光焊接铝基复合材料钛的原位增强作用[J].应用激光,2002,22(3):320-322.
[8]王亚松.夹Ti合金层激光焊接高比分Si Cp/2024Al基复合材料[D].哈尔滨:哈尔滨工业大学,2010:45-46.
[9]冯涛,吴鲁海,楼松年.含Ni夹层SiCp/2014Al铝基复合材料扩散焊[J].航空材料学报,2006,26(4):84-87.
[10]陈永来,于利根,王华明.合金化填充材料Ni对Si Cp/6061A1复合材料激光焊接焊缝显微组织的影响[J].复合材料学报,2000,17(4):63-65.
[11]Askew J R, Wilde J F, Khall T I.Transient liquid phase bonding of 2124 aluminium metal matrix composite[J].Materials Science and Technology,1998,14(9):920-923.
[12]张洋,闫久春,陈晓光.SiCp/A356复合材料超声波辅助钎焊[J].焊接学报,2009,30(3):89-93.
[13]张贵锋,郭洋,张林杰,等.Zn-Al-Li系和Zn-Al系钎料对Si Cp/Al铝基复合材料材料的润湿性[J].中国有色金属学报,2012,22(6):1674-1679.