朱家峁选煤厂工艺设计研究
|
摘要
通过对朱家峁选煤厂入选原煤煤质特性的分析,结合目标市场对产品的要求,确定朱家峁选煤厂采用150～6mm块煤浅槽排矸工艺。对煤的可选性、工艺流程、设备选型等进行了论述,分析了朱家峁选煤厂设计特点。
Base on analysis of coal properties of the selected raw coal in Zhujiaomao Coal Preparation Plant and target market requirements for the products, the coal preparation plant determined to adopt the process of 150～6 mm lump coal dense medium shallow groove to discharge gangue. Based on this, this paper discussed the coal separability, process flow and equipment selection, and analyzed the design characteristics of Zhujiaomao Coal Preparation Plant.
Base on analysis of coal properties of the selected raw coal in Zhujiaomao Coal Preparation Plant and target market requirements for the products, the coal preparation plant determined to adopt the process of 150～6 mm lump coal dense medium shallow groove to discharge gangue. Based on this, this paper discussed the coal separability, process flow and equipment selection, and analyzed the design characteristics of Zhujiaomao Coal Preparation Plant.
引文
[1]戴少康.选煤工艺设计适用技术手册[M].北京:煤炭工业出版社,2010.
[2]田向勤.动力煤选煤厂设计及建设中的问题分析[J].煤炭加工与综合利用,2017(03):13-15.
[3]郑均笛.选煤厂创优设计的总结与思考[J].选煤技术,2016(04):77-79+92.
[4]郑均笛.动力煤脱粉入洗的必要性分析[J].煤炭加工与综合利用,2013(06):34-36.
[5]谭兴富,卢军,孔鹏.动力煤选煤厂脱粉入洗工艺研究[J].煤炭加工与综合利用,2015(03):60-62+65.
[2]田向勤.动力煤选煤厂设计及建设中的问题分析[J].煤炭加工与综合利用,2017(03):13-15.
[3]郑均笛.选煤厂创优设计的总结与思考[J].选煤技术,2016(04):77-79+92.
[4]郑均笛.动力煤脱粉入洗的必要性分析[J].煤炭加工与综合利用,2013(06):34-36.
[5]谭兴富,卢军,孔鹏.动力煤选煤厂脱粉入洗工艺研究[J].煤炭加工与综合利用,2015(03):60-62+65.