09MnNiDR低温钢焊后热处理工艺研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Research on post weld heat treatment for 09MnNiDR low-temperature steel 作者：汪晶洁 ; 吴君明 ; 王红鸿 英文作者：WANG Jingjie;WU Junming;WANG Honghong;Nanjing Iron and Steel Co.,Ltd.;Wuhan University of Science and Technology; 关键词：低温钢 ; 焊后热处理 ; 冲击韧性 英文关键词：low-temperature steel;;post weld heat treatment;;impact toughness 中文刊名：DHJI 英文刊名：Electric Welding Machine 机构：南京钢铁股份有限公司;武汉科技大学; 出版日期：2019-03-20 出版单位：电焊机 年：2019 期：v.49;No.382 语种：中文; 页：DHJI201903006 页数：3 CN：03 ISSN：51-1278/TM 分类号：36-38

摘要

09MnNiDR低温钢在建造和安装容器时,不可避免要经受两次或多次焊后热处理,导致焊接接头性能发生变化,尤其是低温冲击韧性恶化,会带来极大的安全性隐患。以现场中可能出现的焊后热处理工艺为试验条件,研究不同热处理温度545℃、570℃、600℃以及每个温度下不同保温时间对焊接接头强度及低温冲击韧性的影响。通过数据分析发现,09MnNiDR钢可经受焊后热处理温度为545～600℃。当进行长时间热处理加热(反复加热2～3次)时,适用焊后热处理温度为545～570℃。
        09MnNiDR low-temperature steel is utilized for building and installing container. In practice,the container is sometimes required to perform two or more post weld treatment(PWHT). This PWHT leads to the deterioration of welded joint properties,especially impact toughness at lower temperature. In this present work,The effects of different heat treatment temperatures of 545 ℃,570 ℃,600 ℃and duration time on strength and impact toughness of welded joint were studied. Three heat treatment temperatures were selected according to the installation site and condition. The result reveals that 545～600 ℃ is applicable PWHT temperature for 09MnNiDR lowtemperature steel. When PWHT times are more than twice,the proper PWHT temperature is 545～570 ℃.

引文

[1]康鸿雁.低温压力容器焊后热处理的方法[J].化工建设工程,2011(1):34-35.
    [2]李卫红. 09MnNiDR钢的埋弧焊工艺评定[J].热加工工艺,2014(13):193-194.
    [3]王志刚,陈万坤.大直径大厚度压力容器的现场组焊局部热处理[J].石油化工设备,2010(1):54-56.
    [4]龙本仁,肖剑. 09MnNiDR低温钢的焊接工艺评定[J].中国特种设备安全,2012(7):37-38.
    [5]石琳. 09MnNiDR钢压力容器焊后热处理温度评述[J].中国特种设备安全,2013(9):34-36.