摘要
核电厂用860t阻尼器综合试验台架主要为核电站主设备(蒸汽发生器、稳压器和主泵)用大型阻尼器实施动态和静态试验.通过对位置伺服系统和力伺服系统的特性进行分析,并对力伺服系统进行AMESim仿真,验证伺服系统设计能够满足试验台架的性能要求.
The comprehensive test bench of 860 t damper used by nuclear power plant is implement the dynamic test and captive test to large damper of nuclear power station primary equipment including steam generator,pressurizer and primary pump.By analysis the character of location servo system and mechanics servo system,and AMESim simulation the mechanics servo system,validate the mechanics servo system design could make capability of the comprehensive test bench satisfied.
引文
[1]熊冬庆,邓冬,王闯,等.阻尼器在核电厂中的应用与制造关键技术探讨[J].核安全,2014,13(2):83-87.XIONG D Q,DENG D,WANG C,et al.The damper application in nuclear power plants and discussion on key technologies of manufacturing[J].Nuclear Safety,2014,13(2):83-87.
[2]谢洪虎,杨锦春.核岛主设备支撑用大吨位液压阻尼器密封件延寿可行性研究[J].核动力工程,2017,38(1):85-87.XIE H H,YANG J C.Feasibility study on large-loaded hydraulic snubber seal life extension used in primary equipment supports of nuclear power plants[J].Nuclear Power Engineering,2017,38(1):85-87.
[3]杨冬.核岛重要设备和管道液压阻尼器的结构及维护[J].中国核电,2014,7(1):54-58.YANG D.Structure of hydraulic snubbers of important equipment and pipe in tianwan NPP and their maintenance[J].China Nuclear Power,2014,7(1):54-58.
[4]裴郊区,邓杰.核电厂液压阻尼器选型与安装[J].机械工程师,2016(11):84-85.PEI J Q,DENG J.Model selection and install of hydraulic damper in nuclear power plants[J].Mechanical Engineer,2016(11):84-85.
[5]李茂云,王红瑾,徐城杰.压水堆核电厂阻尼器布置优化研究[J].机械工程师,2015(8):172-175.LI M Y,WANG H J,XU C J.Optimal method of dampers in pressurized water reactor nuclear power plant[J].Mechanical Engineer,2015(8):172-175.
[6]陈洪涛,陈元初,纪立军.核电厂中阻尼器的设计安装探讨[J].产业与科技论坛,2017,16(4):83-84.CHEN H T,CHEN Y C,JI L J.Discussion on design and install of damper in nuclear power plants[J].Industrial and Science Tribune,2017,16(4):83-84.