摘要
探讨细纱机超大牵伸纺纱工艺。采用TH558型四罗拉四胶圈三区超大牵伸数控细纱机纺制莫代尔9.8tex赛络集聚纱。通过工艺试验,优选出粗纱定量和捻系数、细纱牵伸分配、罗拉隔距等影响成纱质量的几个关键工艺参数的配置方案,使纺纱顺利进行并获得了较好纺纱效果。认为:采用超大牵伸纺纱,应正确选择牵伸机构与纺纱专件,合理配置纺纱工艺参数,加强运转操作等生产管理工作。
Spinning processing of super large draft in spinning frame was discussed.Modal 9.8tex siro condensed yarn was spun on TH558four-roller four-rubber-covered roll three-zone super large draft spinning frame.By processing test,configuration schemes of several key technology parameters affecting yarn quality including roving weight per unit,roving twist,draft distribution of spinning,roller gauge and so on were optimized to ensure successful spinning and better spinning effect.It is considered draft mechanism and specific spinning components should be correctly selected when super large draft spinning is adopted,spinning processing parameters should be reasonably configured and production management like running operation and so on should be strengthened.
引文
[1]阎磊,宋如勤,郝爱萍.新型纺纱方法与环锭纺纱新技术[J].棉纺织技术,2014,42(1):20-26.
[2]张洪,谢春萍,苏旭中,等.超大牵伸装置纺制2.9tex精梳棉纱工艺研究[J].棉纺织技术,2014,42(7):21-25.
[3]邢顾华.细纱牵伸机构对成纱质量的影响[J].河南纺织高等专科学校学报,2004,16(3):39-42.
[4]李梅.细特莫代尔纤维11.8tex集聚赛络纱的纺制[J].棉纺织技术,2013,41(11):43-45.
[5]苏旭中,谢春萍,冯杰,等.后区牵伸倍数对紧密纺高支棉纱成纱质量的影响[J].纺织导报,2006(7):62-66.