摘要
基于接触非线性有限元分析方法,针对某液压圆锥破碎机整机结构进行有限元分析。通过仿真分析计算,得到整机结构各部件的变形和Mises应力分布,结果表明结构强度满足设计要求。在分析过程中,彻底解决了非线性接触对较多易造成计算不收敛的现象,有效地提高了计算精度,为今后液压圆锥破碎机的研发、结构优化计算提供了指导。
Based on the contact nonlinear finite element analysis method, the finite element analysis on the whole structure of a hydraulic cone crusher was conducted. After simulation and calculation, the deformation and Mises stress distribution of each component of the cone crusher were obtained, which showed the strength of the crusher met the design requirement. During the analysis process, the uneasy computation convergence due to many nonlinear contact pairs was completely avoided, thus the computation accuracy enhanced, which offered guidance for the development and structural optimization of the hydraulic cone crusher.
引文
[1]郭年琴,郑浩龙,郭晟,等.基于EDEM圆锥破碎机层压破碎模型仿真试验研究[J].矿山机械,2015,43(4):61-66.
[2]吴卫萍.基于ANSYS的某圆锥破碎机的有限元分析及优化设计[J].机电技术,2017(3):42-45.
[3]管培鹏,张勇.圆锥破碎机一套多冲程偏心套组件的设计[J].矿山机械,2018,46(12):27-31.
[4]丁凤莲.CH870液压圆锥破碎机防尘系统优化改造[J].矿山机械,2018,46(11):71-74.
[5]程相文,李明,昊郑明.基于层压破碎理论的液压圆锥破碎机定锥强度分析[J].矿山机械,2015,43(9):82-85.
[6]石博强,张浩,吴月伟,等.基于EDEM与Patran的多缸液压圆锥破碎机动锥耦合仿真[J].矿山机械,2015,43(3):75-78.
[7]张周,陈水胜,沈琛,等.圆锥破碎机动锥衬板的有限元分析[J].湖北工业大学学报,2016,31(4):24-26.