基于VB的振动传感器标定系统设计与开发
|
摘要
工业用传感器在使用一段时间后可能因为种种原因不再准确,在参考国家计量检定规程的基础上,利用振动传感器校准仪,开发了基于VB的传感器标定系统。主要介绍了典型传感器的校准原理、测试系统的构建及评定方法。该系统实现了对数据的实时显示、存储及分析处理并标定结论,为用户提供准确的信息和判断依据。实验表明,该系统操作方便,提高了振动传感器校准的自动化程度和校准精度,具有较好的市场前景。
Industrial sensors in use for some time may no longer be accurate due to various reasons. The vibration sensor calibration system was designed according to the national verification procedures in this paper. The system was developed based on VB. The calibration principle of typical sensors,the testing system building and the assessment methods were introduced. The system can display,save and analysis the testing data. It also can provide the accurate information and judgments according to the calibration results. Experiments shows that the system is easy to operate and it can improve the accurate,automatic degree of the sensor calibration. It has good market prospects.
Industrial sensors in use for some time may no longer be accurate due to various reasons. The vibration sensor calibration system was designed according to the national verification procedures in this paper. The system was developed based on VB. The calibration principle of typical sensors,the testing system building and the assessment methods were introduced. The system can display,save and analysis the testing data. It also can provide the accurate information and judgments according to the calibration results. Experiments shows that the system is easy to operate and it can improve the accurate,automatic degree of the sensor calibration. It has good market prospects.
引文
[1]《计量测试技术手册》编辑委员会.计量测试技术手册[Z].北京:中国计量出版社,1997.:145~146.
[2]黄长艺,严普强.机械工程测试技术基础[M].第2版北京:机械工业出版社,2001.
[3]高春艳,刘彬彬,王斌.Visual Basic开发技术大全[M].北京:人民邮电出版社,2007.
[4]许永和,张丹.Visual Basic接口技术与工程实践[M].北京:人民邮电出版社,2007.
[5]范秋涛,王铁玲.加速度传感器的冲击校准[J].计量与测试技术,2005,32(9):6-7.
[6]张晓雁.振动传感器的校准及误差分析[J].山东商业职业技术学院学报,2007,7(6):102-106.
[2]黄长艺,严普强.机械工程测试技术基础[M].第2版北京:机械工业出版社,2001.
[3]高春艳,刘彬彬,王斌.Visual Basic开发技术大全[M].北京:人民邮电出版社,2007.
[4]许永和,张丹.Visual Basic接口技术与工程实践[M].北京:人民邮电出版社,2007.
[5]范秋涛,王铁玲.加速度传感器的冲击校准[J].计量与测试技术,2005,32(9):6-7.
[6]张晓雁.振动传感器的校准及误差分析[J].山东商业职业技术学院学报,2007,7(6):102-106.