摘要
本课题来源于武汉钢铁股份有限公司工业港。武钢工业港作为武汉钢铁集团最重要的原料场,其生产效率和运营情况直接影响到武钢的生存和发展。应其要求,我们对其关键料场设备——QLG1500·40A滚筒式混匀取料机进行整体电气系统升级改造。本系统采用上下位机的结构模式,以PC机作为上位机,PLC作为下位机。主要内容包括系统总体设计,传动部分设计,控制部分设计和上位机监控部分设计。
论文首先阐述了系统的总体设计,给出了系统整体构成,介绍了系统的工作原理。对原系统存在的问题,进行了详细的研究和分析,指出了原因,并给出了相应的解决措施,对系统关键的技术难点——左右行走不同步问题,提出了实时自动纠偏技术,很好的解决了问题。
其次,系统取料作业时,行走速度要求非常低,而在退车时,速度又要求较高,调速比达250:1,在对直流调速进行了分析比较后,选取全数字直流调速装置TPD32。通过对软起动技术的分析,滚筒电机和料耙电机采取晶闸管软起动方式,降低了起动电流,从而避免过大的电网压降和机械冲击力。
控制部分,由于系统对可靠性和稳定性要求非常高,结合先进、可靠、经济实用的原则,并考虑到用户的实际情况,选取了Schneider公司的Quantum系列PLC。概述了PLC的主要功能特点和工作原理,并以工程的实际应用论述了PLC的选型、I/O分配、组网通信、应用程序设计和安装及维护注意事项。
上位机监控部分,应用组态软件,以工程应用为基础实现了画面制作、动画连接、实时数据库、生成报表、故障报警以及与EXCEL的数据交换。很好地实现了现场监控和数据采集管理。
本系统现已投入运营,状况良好,极大地提高了工作效率,取得了良好的经济效益,受到了用户的好评。
This paper was from Wuhan Iron and Steel Corporation's Wugang Industry Port. As the most important raw and processed material basement, Wugang Industry Port makes great influence on Wugang's survival and development especially through its manufacture efficiency and operation condition. In response for their demand, we made an overall electric upgrade on its key installation of the material basement QLG1500_40A roller blending reclaimer. This system was designed as the PC-PLC structure. This paper contains such chapters as follows: the overall design of the system, the design of transmission department, the design of control department, the monitor and control department to PC.
At first, this paper introduced the overall design of the system, the structure, the principle of its operation, then a detailed study and analysis was made according to the original one, give the reasons and measurements. The on-time automatic correcting theory was brought forward aiming at solving the problem of line unsynchronization-the key problem of the system.
At second, when undertaking the task, the request to the walking rate was not so strict, while when moving back, the request was strict, the ration of it goes to 250:1.TPD32 was chosen out after some analysis and comparison of DC timing. The soft starter style was chosen on the thought of when start induction motor it is better to reduce the starting current in case of excessive wallop. Some intense analysis was made on the technology of soft starter.
Then it goes to the part of the control department, because the system calls for a very high reliability and stability, according to the principle of high-tech, economy, reliant and the actual situation of the user, Schneider Company's Quantum series PLC can be the best choose. The selection of PLC, the distribution of I/O, build network to communicate, the design of application programs and the points for attention during installation and maintenance after the PLC'S main function and operation principle was first outlined.
In the chapter of PC monitor and control, the frame production, the cartoon
connection, the on-time database, the coming out of reports, the hitch alarming and the data exchange with EXCEL were introduced on the basic of actual application using. The monitor and control on the spot and data collection have been improved a lot.
This system has been put into practice and always in good conditions. It has improved the working efficiency extremely, with high economic profits returning. All users praise it.
引文
[1] 张国斌.工业自动化的发展趋势与成功策略.自动化博览,2001.1:30~32
[2] 黄承光,鲍娟.浅析工业控制的发展方向.微计算机信息,1995.2:19~21
[3] 王学文,潘键.国内工业控制技术状况和趋势.湖北工学院学报,1995.12:75~79
[4] Alexander S M.Monitoring, diagnosis and control of industrial process. Computer Ind. Eng.1998.35(1, 2):193~196
[5] 何克忠,李伟.计算机控制系统.北京:清华大学出版社,1998
[6] 王耀南.智能控制系统.长沙:湖南大学出版社,1996
[7] 潘新民,王燕芳.微型计算机控制技术.北京:人民邮电出版社,1996
[8] 李丹.用于工业过程控制的一种新工具——组态软件.计算机技术与自动化,1995.3:5~8
[9] 卢春生,光电探测技术及应用,北京,机械工业出版社,1992
[10] 陈三宝,陶秋生.控制系统故障诊断专家系统的设计.北京:人民交通出版社,1997
[11] 王信义,董卫平等编著.生产系统中的监控检测技术.北京:北京理工大学出版社,1997
[12] 韩云台主编.测量技术基础.北京:国防工业出版社,1989
[13] 常健生.检测与转换技术.北京:机械工业出版社,1981
[14] 杨晓强.工程机械工况参数监测系统.工程机械,1998.5:23~24
[15] 张国号,黄建生.,混匀配料自动控制系统及故障诊断.起重运输机械,2001.10:30~32
[16] 王信义.机电一体化技术手册.北京:机械工业出版社,1994
[17] 李振安.工厂电气控制技术.重庆:重庆大学出版社,1998
[18] 邓新钟,周祖德,邓坚.机电传动控制.武汉:华中理工大学出版社,1998
[19] 张粵.电机与控制系统[M].南京:东南大学出版社,1999
[20] 扬位钦,谢锡祺.自动控制原理.北京:电子工业出版社,1995
[21] 吴湘淇.数字信号处理技术.北京:中国铁道出版社,1986
[22] 陈伯时.电力拖动自动控制系统[M].北京:机械工业出版社,1992
[23] Xue Y.etc. Astator flux-oriented voltage source variable speed drive based on dc link measurement, IEEE Transactions On Industrial Applicatins,1991
[24] 意大利西威公司.Typact TPD32直流驱动器使用手册
[25] 王旭光,卫永琴.软启动器主电路工作过程的分析.山东科技大学学报(自然科学版), 2003.22(3):61~65
[26] 吕树清.电动机软启动器的节能功能及应用分析.中小型电机,2001.28(6):43~45
[27] 高景德,王祥珩等.交流电机及其系统分析.北京:清华大学出版社,1993
[28] Lobos T. Nonrecursive methods for real-time determination of basic waveforms of voltages and currents, IEE proceedings C, 1989,136(6):347~351
[29] Mineo Tsuji, EijiYamada. Advanced vector control for induction motor drives. Sarrento, Induction Motor Drive,1998.A1-1-A1~7,3~5
[30] 孙树朴,王旭光,等.电力电子技术[M].徐州:中国矿业大学出版社,1999
[31] 金哲.节电技术与节电工程.北京:中国电力出版社,1999
[32] 意大利西威公司.DST—软起动器技术说明书
[33] 钟肇新.可编程控制器原理及应用.广州:华南理工大学出版社,1991
[34] 田瑞庭.可编程控制器应用技术.北京:机械工业出版社,1994
[35] Li Zhigang,Zhang Naikun,Lu Jianguo.A New Reliability Test Device for Electromagnetic Relays[A].45th Relay Conference[C],1997,7-1~7-5
[36] 陈金华.可编程序控制器(PC)应用技术.北京:电子工业出版社,1994
[37] [美]B.RoBBRT JR.WILHELM.可编程序控制器手册[M].郑殿杰等泽.北京:科学技术文献出版社,1992
[38] 崔亚军.可编程控制器原理及程序设计[M].北京:电子工业出版社,1993
[39] Furuta, K. Sliding mode control of a discrete system[J]. Systems Control Letters,1990, 14: 145—152
[40] Wang W. DuanBr. Study on Monitoring and Diagnosis System for Machinery.International conference on Advanced Manufacturing Technology, Xi'an, P.R.China. 1999.6: 16~ 18
[41] 周少武,郭小定.大型可编程控制系统设计[M].北京:电力出版社,2001
[42] 许建平,刘添兵.PLC控制软件的模块化设计.九江职业技术学院学报,2002.3:13~14
[43] Levis C Eggebrecht. Interfacing.to the IBM personal Computer. USA, 1983
[44] Mercer A. Overview of Enterprise Network Development. USA:IEEE Comm May, 1991: 140~235
[45] 北京亚控自动化软件科技有限公司.组态王KingView V6.03用户手册.
[46] 马玉春,赵跃华.高山无人站监控系统设计与开发.电脑开发与应用[J],2000.13(9):35~36
[47] 王让定.一个组态系统的设计与实现[J].微机发展,2000(1):53~56
[48] 唐新平.基于PC机的生产过程计算机监控系统设计.计算机自动测量与控制,2000.8(2):35~37
[49] Jona Grudin. Computer Supported Coopertative Work, History and Focus[J]. Computer, 1994.4:19~26
[50] 肖津.组态王在微胶联聚合物配置站人机接口设计中的应用[J].电子技术应用,1998(4):18~20
[51] 潘洪跃.基于MODBUS协议通讯的设计与实现.计量技术,2002.4:35~36
[52] Gouid inc. Modbus Protocol Reference Guide,January. 1992
[53] 刘甫.组态王软件包中A/D与I/O数据采集和控制的实现[J].测控技术,2000.19(4):37~39
[54] 黄天戍.组态软件在工业监控系统中的二次开发[J].武汉水利电力大学学报,1999.32(2):77~81
[55] 陈新.ODBC的原理、结构和开发技术探讨.小型微型计算机系统,1997.2(2):45~49