摘要
引文
[1] Kulekci M K. Magnesium and its alloys applications in automotive industry. The International Journalof Advanced Manufacturing Technology[J].2008,39(9):851-865.
[2] Eliezer D, Aghion E, Froes F H. Magnesium science, technology and applications. AdvancedPerformance Materials[J].1998,5(3):201-212.
[3]钟皓,刘培英,周铁涛.镁及镁合金在航空航天中的应用及前景.航空工程与维修[J].2002,4:41-42.
[4]陈振华.耐热镁合金.化学工业出版社,2007.
[5] Friedrich H E, Mordike B L. Magnesium Technology. Springer,2006:677.
[6] Kainer K U. Magnesium Alloys and Technologies. Wiley-VCH,2003:293.
[7] Mordike B L, Kainer K U. Magnesium Alloys and Their Applications. New York: Wiley,2000:816.
[8]陈振华.变形镁合金.化学工业出版社,2005.
[9] Arruebarrena G, Hurtado I, V A In O L A J, et al. Development of investment-casting process ofmg-alloys for aerospace applications. Advanced Engineering Materials[J].2007,9(9):751-756.
[10] Carpenter J A, Jackman J, Li N Y, et al. Automotive mg research and development in north america.Materials Science Forum[J].2007,546:11-24.
[11] Blawert C, Hort N, Kainer K U. Automotive applications of magnesium and its alloys. Trans. IndianInst. Met[J].2004,57(4):397-408.
[12] Pollock T M. Weight loss with magnesium alloys. Science[J].2010,328(5981):986-987.
[13]王渠东,丁文江.镁合金及其成形技术的国内外动态与发展.世界科技研究与发展[J].2004,26(3):39-46.
[14]王渠东,丁文江.镁合金研究开发现状与展望.世界有色金属[J].2004(7):8-11.
[15] Luo A A. Recent magnesium alloy development for elevated temperature applications. InternationalMaterials Reviews[J].2004,49(1):13-30.
[16] Pekguleryuz M O, Kaya A A. Creep resistant magnesium alloys for powertrain applications.Advanced Engineering Materials[J].2003,5(12):866-878.
[17] Aghion E, Bronfin B, Von Buch F, et al. Newly developed magnesium alloys for powertrainapplications. JOM[J].2003,55(11): A30-A33.
[18] Luo A, Pekguleryuz M O. Cast magnesium alloys for elevated-temperature applications. Journal ofMaterials Science[J].1994,29(20):5259-5271.
[19] Mordike B L. Creep-resistant magnesium alloys. Materials Science and Engineering A[J].2002,324(1-2):103-112.
[20] Mordike B L, Ebert T. Magnesium Properties-applications-potential. Materials Science andEngineering A[J].2001,302:37-45.
[21] Das S. Magnesium for automotive applications: Primary production cost assessment. JOM[J].2003,55(11): A22-A26.
[22] Powell B R. The usamp magnesium powertrain cast components project. JOM[J].2002,54(2):49-50.
[23] Watarai H. Trend of research and development for magnesium alloys-reducing the weight of structuralmaterials in motor vehicles. Science and Technology Trends[J].2006,18.
[24] Pekguleryuz M, Celikin M. Creep resistance in magnesium alloys. International Materials Reviews[J].2010,55(4):197-217.
[25] Hu H, Yu A, Li N Y, et al. Potential magnesium alloys for high temperature die cast automotiveapplications: a review. Materials and Manufacturing Processes[J].2003,18(5):687-717.
[26] Beals R S, Tissington C, Zhang X M, et al. Magnesium global development: Outcomes from the TMS2007annual meeting. JOM[J].2007,59(8):39-42.
[27] Yan J L, Sun Y S, Xue F, et al. Creep deformation mechanism of magnesium-based alloys. Journal ofMaterials Science[J].2008,43(21):6952-6959.
[28] Luo A A, Balogh M P, Powell B R. Creep and microstructure of magnesium-aluminum-calcium basedalloys. Metallurgical and Materials Transactions A[J].2001,33:567-574.
[29] Zhu S, Nie J, Mordike B. Creep and rupture properties of a squeeze-cast Mg-Al-Ca alloy.Metallurgical and Materials Transactions A[J].2006,37:1221-1229.
[30] Backes B, Durst K, Amberger D, et al. Particle Hardening in Creep-Resistant Mg-Alloy MRI230DProbed by Nanoindenting Atomic Force Microscopy. Metallurgical and Materials Transactions A[J].2009,40(2):257-261.
[31] Dargusch M S, Zhu S M, Nie J F, et al. Microstructural analysis of the improved creep resistance of adie-cast magnesium--aluminium--rare earth alloy by strontium additions. Scripta Materialia[J].2009,60(2):116-119.
[32]郑江. Mg-Sm-Zn-Zr合金的微观组织、力学性能和蠕变机制研究.[博士论文].上海:上海交通大学.2010.
[33]赵鹏. Mg-Al-Sr/Ca耐热镁合金组织、性能及其蠕变行为研究.[博士论文].上海:上海交通大学.2007.
[34]刘满平. Mg-Al-Ca合金微观组织、力学性能和蠕变行为研究.[博士论文].上海:上海交通大学.2004.
[35] Janik V, Yin D D, Wang Q D, et al. The Elevated-Temperature Mechanical Behavior of peak-agedMg-10Gd-3Y-0.4Zr Alloy. Materials Science and Engineering A[J].2011,528:3105-3122.
[36] Okamoto K, Sasaki M, Takahashi N, et al. Applicability of Mg-Zn-(Y, Gd) Alloys for Engine Pistons.Magnesium Technology.2011.73-78.
[37] Yin D D, Wang Q D, Boehlert C J, et al. Creep and fracture behavior of peak-agedMg-11Y-5Gd-2Zn-0.5Zr (wt pct). Metallurgical and Materials Transactions A[J].2012,43(9):3338-3350.
[38] Yin D D, Wang Q D, Gao Y, et al. Effects of heat treatments on microstructure and mechanicalproperties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) alloy. Journal of Alloys and Compounds[J].2011,509(5):1696-1704.
[39] Yin D D, Wang Q D, Boehlert C J, et al. Creep behavior of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) at573K.Materials Science and Engineering A[J].2012,546:239-247.
[40] Yin D D, Wang Q D, Boehlert C J, et al. Creep and fracture behavior of as-castMg-11Y-5Gd-2Zn-0.5Zr (wt.%). Journal of Materials Science[J].2012,47(17):6263-6275.
[41]高岩. Mg-Y-Gd-Zn-Zr镁合金组织、性能及其蠕变行为研究.[博士论文].上海:上海交通大学.2009.
[42]何上明. Mg-Gd-Y-Zr (-Ca)合金的微观组织演变、性能和断裂行为研究.[博士论文].上海:上海交通大学.2007.
[43] Boehlert C J. The tensile and creep behavior of Mg-Zn alloys with and without Y and Zr as ternaryelements. Journal of Materials Science[J].2007,42(10):3675-3684.
[44] Boehlert C J, Knittel K. The microstructure, tensile properties, and creep behavior of Mg-Zn alloyscontaining0-4.4wt.%Zn. Materials Science and Engineering A[J].2006,417(1-2):315-321.
[45] Wang J G, Hsiung L M, Nieh T G, et al. Creep of a heat treated Mg-4Y-3RE alloy. Materials Scienceand Engineering A[J].2001,315(1-2):81-88.
[46] Suzuki M, Sato H, Maruyama K, et al. Creep behavior and deformation microstructures of Mg-Yalloys at550K. Materials Science and Engineering A[J].1998,252(2):248-255.
[47] Anyanwu I A, Kamado S, Kojima Y. Creep properties of Mg-Gd-Y-Zr alloys. MaterialsTransactions[J].2001,42(7):1212-1218.
[48] Suzuki M, Sato H, Maruyama K, et al. Creep deformation behavior and dislocation substructures ofMg-Y binary alloys. Materials Science and Engineering A[J].2001,319-321(""):751-755.
[49] Maruyama K, Suzuki M, Sato H. Creep strength of magnesium-based alloys. Metallurgical andMaterials Transactions A[J].2002,33(3):875-882.
[50] Zhang M X, Kelly P M. Morphology and crystallography of Mg24Y5precipitate in Mg-Y alloy. ScriptaMaterialia[J].2003,48(4):379-384.
[51] Suzuki M, Kimura T, Koike J, et al. Strengthening effect of Zn in heat resistant Mg-Y-Zn solidsolution alloys. Scripta Materialia[J].2003,48(8):997-1002.
[52] Janík V, Hnilica F, Zuna P, et al. Cavitation and grain boundary sliding during creep ofMg-Y-Nd-Zn-Mn alloy. Transactions of Nonferrous Metals Society of China[J].2008,18(Supplement1):s64-s68.
[53] Morgan J E, Mordike B L. An investigation into creep-resistant, as-cast magnesium alloys containingyttrium, zinc, neodymium and zirconium. Metallurgical and Materials Transactions A[J].1981,12(9):1581-1585.
[54] Gao L, Chen R S, Han E H. Effects of rare-earth elements Gd and Y on the solid solutionstrengthening of Mg alloys. Journal of Alloys and Compounds[J].2009,481(1-2):379-384.
[55] Hnilica F, Janik V, Smola B, et al. Creep behaviour of the creep resistant MgY3Nd2Zn1Mn1alloy.Materials Science and Engineering A[J].2008,489(1-2):93-98.
[56] Homma T, Kunito N, Kamado S. Fabrication of extraordinary high-strength magnesium alloy by hotextrusion. Scripta Materialia[J].2009,61(6):644-647.
[57] Smola B, Stulikova I, Pelcov A J, et al. Significance of stable and metastable phases in hightemperature creep resistant magnesium-rare earth base alloys. Journal of alloys and compounds[J].2004,378(1-2):196-201.
[58] Chang S Y, Nakagaido T, Hong S K, et al. Effect of yttrium on high temperature strength ofmagnesium. Materials Transactions[J].2001,42(7):1332-1338.
[59] Nie J F, Gao X, Zhu S M. Enhanced age hardening response and creep resistance of Mg-Gd alloyscontaining Zn. Scripta Materialia[J].2005,53(9):1049-1053.
[60] Zhu S M, Nie J F. Serrated flow and tensile properties of a Mg-Y-Nd alloy. Scripta Materialia[J].2004,50(1):51-55.
[61] Yang Z L J P. Precipitation process and effect on mechanical properties of Mg-9Gd-3Y-0.6Zn-0.5Zralloy. Materials Science and Engineering A[J].2007,454-455:274-280.
[62] Yamada K, Okubo Y, Shiono M, et al. Alloy development of high toughness Mg-Gd-Y-Zn-Zr alloys.Materials Transactions[J].2006,47(4):1066-1070.
[63] Anyanwu I A, Kamado S, Kojima Y. Aging characteristics and high temperature tensile properties ofMg-Gd-Y-Zr alloys. Materials Transactions[J].2001,42(7):1206-1211.
[64] Wang J, Zhang D P, Fang D Q, et al. Effect of Y for enhanced age hardening response and mechanicalproperties of Mg-Ho-Y-Zr alloys. Journal of Alloys and Compounds[J].2008,454(1-2):194-200.
[65] Socjusz-Podosek M, Litynska L. Effect of yttrium on structure and mechanical properties of Mg alloys.Materials Chemistry and Physics[J].2003,80(2):472-475.
[66] Liu X B C R. Effects of ageing treatment on microstructures and properties of Mg-Gd-Y-Zr alloyswith and without Zn additions. Journal of Alloys and Compounds[J].2008,465(1-2):232-238.
[67] Wang Q D, Li D Q, Blandin J J, et al. Microstructure and creep behavior of the extrudedMg-4Y-4Sm-0.5Zr alloy. Materials Science and Engineering A[J].2009,516(1-2):189-192.
[68] Deng Z Z, Zhang X M, Deng Y L, et al. Aging Behavior of Mg-9Gd-4Y-0.6Mn Alloy. MaterialsScience Forum[J].2007,546-549:425-428.
[69] Zhu Y M, Morton A J, Nie J F. Improvement in the age-hardening response of Mg-Y-Zn alloys by Agadditions. Scripta Materialia[J].2008,58(7):525-528.
[70] Peng Q M, Wu Y M, Fang D Q, et al. Microstructures and properties of Mg--7Gd alloy containing Y.Journal of alloys and compounds[J].2007,430(1):252-256.
[71] Polmear I J. Magnesium alloys and applications. Materials science and technology[J].1994,10(1):1-16.
[72] Yang Z, Li J P, Guo Y C, et al. Precipitation process and effect on mechanical properties ofMg-9Gd-3Y-0.6Zn-0.5Zr alloy. Materials Science and Engineering: A[J].2007,454:274-280.
[73] Kielbus A, Rzychon T. Mechanical and creep properties of Mg-4Y-3RE and Mg-3Nd-1Gd magnesiumalloy.2011.
[74] Hono K, Mendis C L, Sasaki T T, et al. Towards the development of heat-treatable high-strengthwrought Mg alloys. Scripta Materialia[J].2010,63(7):710-715.
[75] Li R G, Nie J F, Huang G J, et al. Development of high-strength magnesium alloys via combinedprocesses of extrusion, rolling and ageing. Scripta Materialia[J].2011,64(10):950-953.
[76] Smola B, Stul kova I, von Buch F, et al. Structural aspects of high performance mg alloys design.Materials Science and Engineering A[J].2002,324(1-2):113-117.
[77] Sun M, Wu G, Wang W, et al. Effect of Zr on the microstructure, mechanical properties and corrosionresistance of Mg--10Gd--3Y magnesium alloy. Materials Science and Engineering: A[J].2009,523(1):145-151.
[78] Sun M, Wu G, Dai J, et al. Grain refinement behavior of potassium fluozirconate salts mixtureintroduced into Mg--10Gd--3Y magnesium alloy. Journal of Alloys and Compounds[J].2010,494(1):426-433.
[79] Sun M, Easton M A, Stjohn D H, et al. Grain Refinement of Magnesium Alloys by Mg--Zr MasterAlloys: The Role of Alloy Chemistry and Zr Particle Number Density. Advanced Engineering Materials[J].2012.
[80] Rokhlin L L. Magnesium alloys containing rare earth metals: structure and properties. CRC,2003.
[81]付彭怀. Mg-Nd-Zn-Zr合金微观组织、力学性能和强化机制的研究.[博士论文].上海:上海交通大学.2008.
[82] Antion C, Donnadieu P, Perrard F, et al. Hardening precipitation in a Mg-4Y-3RE alloy. ActaMaterialia[J].2003,51(18):5335-5348.
[83] Nie J F, Muddle B. Precipitation in magnesium alloy WE54during isothermal ageing at250°C.Scripta Materialia[J].1999,40(10):1089-1094.
[84] Apps P J, Lorimer G W, Karimzadeh H, et al. Precipitation Processes in Magnesium-Heavy RareEarth Alloys during Ageing at300°C. In Magnesium Alloys and Their Applications, Wiley-VCH VerlagGmbH&Co. KGaA,2006,53-58.
[85] Mordike B L, Stulíková I, Smola B. Mechanisms of creep deformation in Mg-Sc-based alloys.Metallurgical and Materials Transactions A[J].2005,36:1729-1736.
[86] King J F. Development of practical high temperature magnesium casting alloys. In Magnesium Alloysand Their Applications, New York:Wiley,2000,14-22.
[87] Barucca G, Ferragut R, Lussana D, et al. Phase transformations in QE22Mg alloy. Acta Materialia[J].2009,57(15):4416-4425.
[88] Janik V, Wang Q, Yin D, et al. Influence of Thermal and Thermo-mechanical Processing on the CreepResistance of Mg-10Gd-3Y-0.4Zr Alloy. Materials Science Forum[J].2011,675-677:487-490.
[89] Drits M E, Sviderskaya Z A, Rokhlin L L, et al. Effect of alloying on the properties of Mg-Gd alloys.Metal Science and Heat Treatment[J].1979,21(11):887-889.
[90] He S M, Zeng X Q, Peng L M, et al. Microstructure and strengthening mechanism of high strengthMg-10Gd-2Y-0.5Zr alloy. Journal of Alloys and Compounds[J].2007,427(1-2):316-323.
[91] He S M, Zeng X Q, Peng L M, et al. Precipitation in a Mg-10Gd-3Y-0.4Zr (wt.%) alloy duringisothermal ageing at250°c. Journal of Alloys and Compounds[J].2006,421(1-2):309-313.
[92] Gao Y, Wang Q D, Gu J H, et al. Effects of heat treatments on microstructure and mechanicalproperties of Mg-15Gd-5Y-0.5Zr alloy. Journal of Rare Earths[J].2008,26(2):298-302.
[93] Arzt E, G hring E. A model for dispersion strengthening of ordered intermetallics at hightemperatures. Acta Materialia[J].1998,46(18):6575-6584.
[94] Arzt E, G hring E. Effects of order on dispersion strengthening at high temperatures: A first model.Scripta Metallurgica et Materialia[J].1993,28(7):843-848.
[95] Chino Y, Mabuchi M, Hagiwara S, et al. Novel equilibrium two phase Mg alloy with the long-periodordered structure. Scripta Materialia[J].2004,51(7):711-714.
[96] Galiyev A, Sitdikov O, Kaibyshev R. Deformation behavior and controlling mechanisms for plasticflow of magnesium and magnesium alloy. Materials Transactions[J].2003,44(4):426-435.
[97] Grobner J, Kozlov A, Fang X Y, et al. Phase equilibria and transformations in ternary Mg-richMg--Y--Zn alloys. Acta Materialia[J].2012.
[98] Honma T, Ohkubo T, Kamado S, et al. Effect of Zn additions on the age-hardening ofMg-2.0Gd-1.2Y-0.2Zr alloys. Acta Materialia[J].2007,55(12):4137-4150.
[99] Itoi T, Seimiya T, Kawamura Y, et al. Long period stacking structures observed in Mg97Zn1Y2alloy.Scripta Materialia[J].2004,51(2):107-111.
[100] Kawamura Y, Hayashi K, Inoue A, et al. Rapidly solidified powder metallurgy Mg97Zn1Y2alloys withexcellent tensile yield strength above600MPa. Materials Transactions[J].2001,42(7):1172-1176.
[101] Liu K, Zhang J, Lu H, et al. Effect of the long periodic stacking structure and W-phase on themicrostructures and mechanical properties of the Mg–8Gd–xZn–0.4Zr alloys. Materials&Design[J].2010,31(1):210-219.
[102] Matsuda M, Ii S, Kawamura Y, et al. Interaction between long period stacking order phase anddeformation twin in rapidly solidified Mg97Zn1Y2alloy. Materials Science and Engineering A[J].2004,386(1-2):447-452.
[103] Yamasaki M, Anan T, Yoshimoto S, et al. Mechanical properties of warm-extruded Mg-Zn-Gd alloywith coherent14H long periodic stacking ordered structure precipitate. Scripta Materialia[J].2005,53(7):799-803.
[104] Yamasaki M, Sasaki M, Nishijima M, et al. Formation of14H long period stacking ordered structureand profuse stacking faults in Mg-Zn-Gd alloys during isothermal aging at high temperature. ActaMaterialia[J].2007,55(20):6798-6805.
[105] Gao Y, Wang Q D, Gu J H, et al. Comparison of microstructure in Mg-10Y-5Gd-0.5Zr andMg-10Y-5Gd-2Zn-0.5Zr alloys by conventional casting. Journal of Alloys and Compounds[J].2009,477:374-378.
[106] Gao Y, Wang Q D, Gu J H, et al. Behavior of Mg-15Gd-5Y-0.5Zr alloy during solution heat treatmentfrom500to540°c. Materials Science and Engineering A[J].2007,459(1-2):117-123.
[107] Wang Q D, Gao Y, Yin D D, et al. Characterization of phases in Mg-10Y-5Gd-2Zn-0.5Zr alloyprocessed by heat treatment. Transactions of Nonferrous Metals Society of China[J].2010,20:2076-2080.
[108] Luo Z P, Zhang S Q. High-resolution electron microscopy on the X-Mg12ZnY phase in a high strengthMg-Zn-Zr-Y magnesium alloy. Journal of Materials Science Letters[J].2000,19(9):813-815.
[109] Luo Z P, Zhang S Q, Tang Y L, et al. Microstructures of Mg-Zn-Zr-RE alloys with high RE and lowZn contents. Journal of Alloys and Compounds[J].1994,209(1-2):275-278.
[110] Zhu Y M, Morton A J, Nie J F. The18R and14H long-period stacking ordered structures in Mg-Y-Znalloys. Acta Materialia[J].2010,58(8):2936-2947.
[111] Nie J F, Muddle B. Characterisation of strengthening precipitate phases in a Mg-Y-Nd alloy. ActaMaterialia[J].2000,48(8):1691-1703.
[112] Nie J F. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys.Scripta Materialia[J].2003,48(8):1009-1015.
[113] Li N. Automotive magnesium applications and life cycle environmental assessment.3rd InternationalConference on SF6and the environment. Scottsdale, AZ.2004.
[114] Pekguleryuz M O. Magnesium materials development: a global overview. McGill University,2007.http://people.mcgill.ca/files/mihriban.pekguleryuz/M_Broad_Horizons.pdf.
[115] Beals R S, Liu Z K, Wayne Jones J, et al. Usamp magnesium powertrain cast components:fundamental research summary. JOM[J].2007,59(8):43-48.
[116] Beals R S, Tissington C, Zhang X, et al. Magnesium global development: outcomes from the tms2007annual meeting. JOM[J].2007,59(8):39-42.
[117] Von Mises R. Mechanics of Plastic Deformation in Crystals. Z. Angew. Math. Mech[J].1928,6:85.
[118] Obara T., Yoshinga H., Morozumi S.{1122}〈1123〉 slip system in magnesium. ActaMetallurgica[J].1973,21(7):845-853.
[119] Couret A, Caillard D. An in situ study of prismatic glide in magnesium--i. The rate controllingmechanism. Acta Metallurgica[J].1985,33(8):1447-1454.
[120] Chapuis A, Driver J H. Temperature dependency of slip and twinning in plane strain compressedmagnesium single crystals. Acta Materialia[J].2011,59(5):1986-1994.
[121] Agnew S R, Horton J A, Yoo M H. Transmission electron microscopy investigation of dislocations in Mg and alpha-solid solution Mg-Li alloys. Metallurgical and Materials Transactions A[J].2002,33(3):851-858.
[122] Hutchinson W B, Barnett M R. Effective values of critical resolved shear stress for slip inpolycrystalline magnesium and other hcp metals. Scripta Materialia[J].2010,63(7):737-740.
[123] Yoo M H. Slip, twinning, and fracture in hexagonal close-packed metals. Metallurgical and MaterialsTransactions A[J].1981,12(3):409-418.
[124] Yoo M H, Morris J R, Ho K M, et al. Nonbasal deformation modes of hcp metals and alloys: role ofdislocation source and mobility. Metallurgical and Materials Transactions A[J].2002,33(3):813-822.
[125] Yoo M H, Agnew S R, Morris J R, et al. Non-basal slip systems in hcp metals and alloys: sourcemechanisms. Materials Science and Engineering A[J].2001,319:87-92.
[126] Koike J, Kobayashi T, Mukai T, et al. The activity of non-basal slip systems and dynamic recovery atroom temperature in fine-grained az31b magnesium alloys. Acta Materialia[J].2003,51(7):2055-2065.
[127] Akhtar A, Teghtsoonian E. Solid solution strengthening of magnesium single crystals--ii the effect ofsolute on the ease of prismatic slip. Acta Metallurgica[J].1969,17(11):1351-1356.
[128] Reed-Hill R E, Robertson W D. Acta Metall[J].1957,5:728-737.
[129] Yoshinaga H, Horiuchi R. Trans JIM[J].1964,5:14.
[130] Ward Flynn P, Mote J, Dorn J E. Trans. TMS-AIME[J].1961,221:1148-1154.
[131] Wonziewicz B C, Backofen W A. Plasticity of Magnesium Crystals. Trans AIME[J].1967,239:1422.
[132] Dieter G E. Mechanical metallurgy.3rd ed. New York: McGraw-Hill,1986:67.
[133] Shi L, Northwood D. Recent progress in the modeling of high-temperature creep and its application toalloy development. Journal of Materials Engineering and Performance[J].1995,4(2):196-211.
[134] Meyers M A, Chawla K K. Mechanical Behavior of Materials. Cambridge University Press,2009.
[135] Langdon T G. The role of grain boundaries in high temperature deformation. Materials Science andEngineering A[J].1993,166(1-2):67-79.
[136] Langdon T. Grain boundary sliding revisited: Developments in sliding over four decades. Journal ofMaterials Science[J].2006,41:597-609.
[137] Gifkins R C. Grain-boundary participation in high-temperature deformation: An historical review.Materials Characterization[J].1994,32(2):59-77.
[138] Stanford N, Sotoudeh K, Bate P S. Deformation mechanisms and plastic anisotropy in magnesiumalloy AZ31. Acta Materialia[J].2011.
[139] Kottada R S, Chokshi A H. Grain boundary sliding during diffusion and dislocation creep in a Mg-0.7pct Al alloy. Metallurgical and Materials Transactions A[J].2007,38(8):1743-1749.
[140] Raynor G V. The physical metallurgy of magnesium and its alloys. Pergamon,1959.
[141] Cadek J. Creep in Metallic Materials. Amsterdam:1988.
[142]张俊善.材料的高温变形与断裂.北京:科学出版社,2007.
[143]平修二.金属材料的高温强度.北京:科学出版社,1995:535.
[144] Kassner M E, Perez-Prado M T. Five-Power-Law Creep in Single Phase Metals and Alloys. Progressin Materials Science[J].2000,45(1):1-102.
[145] Kassner M, Perez-Prado M. Fundamentals of Creep in Metals and Alloys. ELSEVIER,2004:288.
[146] Ashby M F, Gandhi C, Taplin D. Fracture-Mechanism Maps and their Construction for Fcc Metalsand Alloys. Acta Metallurgica[J].1979,27(5):699-729.
[147] Gandhi C, Ashby M F. Fracture-Mechanism Maps for Materials Which Cleave-Fcc, Bcc and HcpMetals and Ceramics. Acta Metallurgica[J].1979,27(10):1565-1602.
[148] Vagarali S S, Langdon T G. Deformation mechanisms in HCP metals at elevated temperatures-I. creepbehavior of magnesium. Acta Metallurgica[J].1981,29(12):1969-1982.
[149] Vagarali S S, Langdon T G. Deformation mechanisms in HCP metals at elevated temperatures-II.creep behavior of a Mg-0.8-percent Al solid solution alloy. Acta Metallurgica[J].1982,30(6):1157-1170.
[150] Zhu S M, Nie J F, Gibson M A, et al. Microstructure and Creep Behavior of High-Pressure Die-CastMagnesium Alloy AE44. Metallurgical and Materials Transactions A[J].2012:1-8.
[151] Yoo M H, Morris J R, Ho K M, et al. Nonbasal deformation modes of HCP metals and alloys: role ofdislocation source and mobility. Metallurgical and Materials Transactions A[J].2002,33(3):813-822.
[152] Sherby O D, Burke P M. Mechanical behavior of crystalline solids at elevated temperature. Progress inMaterials Science[J].1968,13(7):323-390.
[153] Sandl bes S, Friak M, Zaefferer S, et al. The relation between ductility and stacking fault energies inMg and Mg-Y alloys. Acta Materialia[J].2012.
[154] Yasi J A, Hector L G, Trinkle D R. Prediction of thermal cross-slip stress in magnesium alloys from ageometric interaction model. Acta Materialia[J].2012,60(5):2350-2358.
[155] Yasi J A, Hector L G, Trinkle D R. Prediction of thermal cross-slip stress in magnesium alloys fromdirect first-principles data. Acta Materialia[J].2011,59(14):5652-5660.
[156] Milika K, Adek J, Ry P. High temperature creep mechanisms in magnesium. Acta Metallurgica[J].1970,18(10):1071-1082.
[157] P U Schl W. Models for dislocation cross-slip in close-packed crystal structures: a critical review.Progress in Materials Science[J].2002,47(4):415-461.
[158] Mabuchi M, Higashi K. Strengthening mechanisms of Mg-Si alloys. Acta Materialia[J].1996,44(11):4611-4618.
[159] Spigarelli S, Regev M, Evangelista E, et al. Review of creep behavior of AZ91magnesium alloyproduced by different technologies. Materials Science and Technology[J].2001,17:627-638.
[160] Blum W, Li Y, Zeng X, et al. Creep deformation mechanisms in high-pressure die-castmagnesium-aluminum-base alloys. Metallurgical and Materials Transactions A[J].2005,36:1721-1728.
[161] Morento I P, Nandy T K, Jones J W, et al. Microstructural stability and creep of rare-earth containingmagnesium alloys. Scripta Materialia[J].2003,48:1029-1034.
[162] Apps P J, Karimzadeh H, King J F, et al. Precipitation reactions in magnesium-rare earth alloyscontaining yttrium, gadolinium or dysprosium. Scripta materialia[J].2003,48(8):1023-1028.
[163] Stanford N, Geng J, Chun Y B, et al. Effect of plate-shaped particle distributions on the deformationbehaviour of magnesium alloy AZ91in tension and compression. Acta Materialia[J].2012,60(1):218-228.
[164] Clark J B. Age hardening in a Mg-9wt.%Al alloy. Acta Metallurgica[J].1968,16(2):141-152.
[165] Clark J B. Transmission electron microscopy study of age hardening in a Mg-5wt.%Zn alloy. ActaMetallurgica[J].1965,13(12):1281-1289.
[166] Abe E, Kawamura Y, Hayashi K, et al. Long-period ordered structure in a high-strengthnanocrystalline Mg-1at%Zn-2at%Y alloy studied by atomic-resolution Z-contrast STEM. ActaMaterialia[J].2002,50(15):3845-3857.
[167] Wu Y J, Lin D L, Zeng X Q, et al. Formation of a lamellar14h-type long period stacking orderedstructure in an as-cast Mg-Gd-Zn-Zr alloy. Journal of Materials Science[J].2009,44(6):1607-1612.
[168] Wu Y J, Zeng X Q, Lin D L, et al. The microstructure evolution with lamellar14H-type LPSOstructure in an Mg96.5Gd2.5Zn1alloy during solid solution heat treatment at773K. Journal of Alloys andCompounds[J].2009,477(1-2):193-197.
[169] Ding W J, Wu Y J, Peng L M, et al. Formation of14h-type long period stacking ordered structure inthe as-cast and solid solution treated Mg-Gd-Zn-Zr alloys. Journal of Materials Research[J].2009,24(05):1842-1854.
[170] Wu Y J, Peng L M, Zeng X Q, et al. A high-strength extruded Mg-Gd-Zn-Zr alloy with superplasticity.Journal of Material Research[J].2009,18(12):19.
[171]吴玉娟. Mg-Gd-Zn(-Zr)镁合金中长周期堆垛有序结构的形成及强韧化机理研究.[博士论文].上海:上海交通大学.2009.
[172] Ashby M F, Dyson B F. Creep damage mechanics and micromechanisms. In Advances in fractureresearch, Valluri R S, Oxford and New York:Pergamon Press,1984:1,3-30.
[173] Zheng K Y, Zeng X Q, Dong J, et al. Effect of initial temper on the creep behavior of a Mg-Gd-Nd-Zralloy. Materials Science and Engineering A[J].2008,492(1-2):185-190.
[174]郑开云. Mg-Gd-Nd-Zr系高强耐热镁合金组织与性能研究.[博士论文].上海交通大学.2008.
[1] Friedrich H E, Mordike B L. Magnesium Technology. Springer,2006:83.
[2]吕宜振. Mg-Al-Zn合金组织、性能、变形和断裂行为研究.[博士论文].上海:上海交通大学.2001.
[3]袁广银.铋和锑对镁铝基合金显微组织和力学性能的影响.[博士论文].南京:东南大学.1999.
[4]刘满平. Mg-Al-Ca合金微观组织、力学性能和蠕变行为研究.[博士论文].上海:上海交通大学.2004.
[5] Yin D D, Wang Q D, Gao Y, et al. Effects of heat treatments on microstructure and mechanicalproperties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) alloy. Journal of Alloys and Compounds[J].2011,509(5):1696-1704.
[6]高岩. Mg-Y-Gd-Zn-Zr镁合金组织、性能及其蠕变行为研究.[博士论文].上海:上海交通大学.2009.
[7] Mordike B L, Kainer K U. Magnesium Alloys and Their Applications. New York: Wiley,2000:816.
[8] Mordike B L, StulíkováI, Smola B. Mechanisms of creep deformation in Mg-Sc-based alloys.Metallurgical and Materials Transactions A[J].2005,36:1729-1736.
[9]陈振华.耐热镁合金.化学工业出版社,2007.
[10]郭国庆,谢敬佩,王杰芳等.内燃机活塞材料及其相关技术.拖拉机与农用运输车[J].2004(3):9-11.
[11] Mordike B L, Kainer K U. Magnesium Alloys and Their Applications. New York: Wiley,2000:35-39.
[12] Okamoto K, Sasaki M, Takahashi N, et al. Applicability of Mg-Zn-(Y, Gd) Alloys for Engine Pistons.Magnesium Technology.2011.73-78.
[13]屠海令,干勇.金属材料理化测试全书.化学工业出版社,2007.
[14]郑江. Mg-Sm-Zn-Zr合金的微观组织、力学性能和蠕变机制研究.[博士论文].上海:上海交通大学.2010.
[15] Boehlert C J, Cowen C J, Tamirisakandala S, et al. In situ scanning electron microscopy observations oftensile deformation in a boron-modified Ti-6Al-4V alloy. Scripta Materialia[J].2006,55(5):465-468.
[16] Boehlert C J, Li H, Wang L, et al. Slip system characterization of inconel718: using in-situ scanningelectron microscopy. Advanced Materials&Processes[J].2010,168(11):41-45.
[17] Quast J P, Boehlert C J. Comparison of the microstructure, tensile, and creep behavior forTi-24Al-17Nb-0.66Mo (Atomic Percent) and Ti-24Al-17Nb-2.3Mo (Atomic Percent) alloys. Metallurgicaland Materials Transactions A[J].2007,38(3):529-536.
[18] Dieter G E. Mechanical metallurgy.3rd ed. New York: McGraw-Hill,1986:67.
[1] Henry S D, Sanders B R, Hrivnak N, et al. ASM Specialty Handbook: Aluminum and AluminumAlloys.1993:41.
[2] Luo A, Pekguleryuz M O. Cast magnesium alloys for elevated-temperature applications. Journal ofMaterials Science[J].1994,29(20):5259-5271.
[3] Mordike B L, Stulíková I, Smola B. Mechanisms of creep deformation in Mg-Sc-based alloys.Metallurgical and Materials Transactions A[J].2005,36:1729-1736.
[4] King J F. Development of practical high temperature magnesium casting alloys. In Magnesium Alloysand Their Applications, New York:Wiley,2000,14-22.
[5]陈振华.耐热镁合金.化学工业出版社,2007.
[6]高岩. Mg-Y-Gd-Zn-Zr镁合金组织、性能及其蠕变行为研究.[博士论文].上海:上海交通大学.2009.
[7] Okamoto K, Sasaki M, Takahashi N, et al. Applicability of Mg-Zn-(Y, Gd) Alloys for Engine Pistons.Magnesium Technology.2011.73-78.
[8]郭国庆,谢敬佩,王杰芳等.内燃机活塞材料及其相关技术.拖拉机与农用运输车[J].2004(3):9-11.
[9]陈长江,王渠东,尹冬弟等.内燃机活塞材料的研究进展.材料导报[J].2009,23(15):62-65.
[10] Dieter G E. Mechanical metallurgy.3rd ed. New York: McGraw-Hill,1986:67.
[11] Meyers M A, Chawla K K. Mechanical Behavior of Materials. Cambridge University Press,2009.
[12]平修二.金属材料的高温强度.北京:科学出版社,1995:535.
[13] Sellars C M, Mctegart W J. On the mechanism of hot deformation. Acta Metallurgica[J].1966,14(9):1136-1138.
[14] Evangelista E, Spigarelli S. Constitutive equations for creep and plasticity of aluminum alloys producedby powder metallurgy and aluminum-based metal matrix composites. Metallurgical and MaterialsTransactions A[J].2002,33(2):373-381.
[15] Urcola J J, Sellars C M. Effect of changing strain rate on stress-strain behavior during high-temperaturedeformation. Acta Metallurgica[J].1987,35(11):2637-2647.
[16] Sellars C M, Tegart W J. Hot workability. International Materials Reviews[J].1972,17(1):1-24.
[17] Yin D D, Wang Q D, Boehlert C J, et al. Creep and fracture behavior of peak-agedMg-11Y-5Gd-2Zn-0.5Zr (wt pct). Metallurgical and Materials Transactions A[J].2012,43(9):3338-3350.
[18] Vagarali S S, Langdon T G. Deformation mechanisms in HCP metals at elevated temperatures-I. creepbehavior of magnesium. Acta Metallurgica[J].1981,29(12):1969-1982.
[19] Galiyev A, Kaibyshev R, Gottstein G. Correlation of plastic deformation and dynamic recrystallizationin magnesium alloy ZK60. Acta Materialia[J].2001,49(7):1199-1207.
[20] Jones R B, Harris J E. Creep deformation of polycrystalline magnesium. Archive: Proceedings of theInstitution of Mechanical Engineers, Conference Proceedings1964-1970(Vols178-184)[J].1963,178(31):1-8.
[21] Vagarali S S, Langdon T G. Deformation mechanisms in HCP metals at elevated temperatures-II. creepbehavior of a Mg-0.8-percent Al solid solution alloy. Acta Metallurgica[J].1982,30(6):1157-1170.
[22] Boehlert C J, Cowen C J, Tamirisakandala S, et al. In situ scanning electron microscopy observations oftensile deformation in a boron-modified Ti-6Al-4V alloy. Scripta Materialia[J].2006,55(5):465-468.
[23] Boehlert C J, Li H, Wang L, et al. Slip system characterization of inconel718: using in-situ scanningelectron microscopy. Advanced Materials&Processes[J].2010,168(11):41-45.
[24]张俊善.材料的高温变形与断裂.北京:科学出版社,2007.
[25] Williams D B, Carter C B. Transmission Electron Microscopy: A textbook for Materials Science.Springer,1996:729.
[26] Koike J, Kobayashi T, Mukai T, et al. The activity of non-basal slip systems and dynamic recovery atroom temperature in fine-grained AZ31b magnesium alloys. Acta Materialia[J].2003,51(7):2055-2065.
[27] Agnew S R, Horton J A, Yoo M H. Transmission electron microscopy investigation ofdislocations in mg and alpha-solid solution Mg-Li alloys. Metallurgical and Materials Transactions A[J].2002,33(3):851-858.
[28] Obara T.,Yoshinga H.,Morozumi S.{112-2}〈1123〉slip system in magnesium. Acta Metallurgica[J].1973,21(7):845-853.
[29] Couret A, Caillard D. An in situ study of prismatic glide in magnesium-i. The rate controllingmechanism. Acta Metallurgica[J].1985,33(8):1447-1454.
[30] Chapuis A, Driver J H. Temperature dependency of slip and twinning in plane strain compressedmagnesium single crystals. Acta Materialia[J].2011,59(5):1986-1994.
[31] Hutchinson W B, Barnett M R. Effective values of critical resolved shear stress for slip inpolycrystalline magnesium and other HCP metals. Scripta Materialia[J].2010,63(7):737-740.
[32] Boehlert C J, Chen Z, Guti E Rrez-Urrutia I, et al. In situ analysis of the tensile and tensile-creepdeformation mechanisms in rolled AZ31. Acta Materialia[J].2011,60:1889-1904.
[33] Keshavarz Z, Barnett M R. EBSD analysis of deformation modes in Mg-3Al-1Zn. Scripta Materialia[J].2006,55(10):915-918.
[34] Yoo M H, Morris J R, Ho K M, et al. Nonbasal deformation modes of hcp metals and alloys: role ofdislocation source and mobility. Metallurgical and Materials Transactions A[J].2002,33(3):813-822.
[35] Akhtar A, Teghtsoonian E. Solid solution strengthening of magnesium single crystals—I alloyingbehaviour in basal slip. Acta Metallurgica[J].1969,17(11):1339-1349.
[36] Agnew S R, Yoo M H, Tome C N. Application of texture simulation to understanding mechanicalbehavior of Mg and solid solution alloys containing Li or Y. Acta Materialia[J].2001,49(20):4277-4289.
[37] Mordike B L, Kainer K U. Magnesium Alloys and Their Applications. New York: Wiley,2000:816.
[38] Galiyev A, Sitdikov O, Kaibyshev R. Deformation behavior and controlling mechanisms for plasticflow of magnesium and magnesium alloy. Materials Transactions[J].2003,44(4):426-435.
[39] Suzuki M, Sato H, Maruyama K, et al. Creep deformation behavior and dislocation substructures ofMg-Y binary alloys. Materials Science and Engineering A[J].2001,319-321(2):751-755.
[40] Xu Y, Hu L, Deng T, et al. Hot deformation behavior and processing map of as-cast AZ61magnesiumalloy. Materials Science and Engineering A[J].2012,559(0):528-533.
[41] Frost H J, Ashby M F. Deformation-mechanism maps: the plasticity and creep of metals and ceramics.1st ed. Oxford: Pergamon Press,1982:166.
[42] Yoo M H, Agnew S R, Morris J R, et al. Non-basal slip systems in hcp metals and alloys: sourcemechanisms. Materials Science and Engineering A[J].2001,319:87-92.
[43] P U Schl W. Models for dislocation cross-slip in close-packed crystal structures: a critical review.Progress in Materials Science[J].2002,47(4):415-461.
[44]丁汉林. AZ91镁合金高温变形行为的实验研究与数值模拟.[博士论文].上海交通大学.2007.
[45]周海涛. Mg-6Al-1Zn镁合金高温塑性变形行为及管材热挤压研究.[博士论文].上海交通大学.2004.
[46] Yu K, Li W, Zhao J, et al. Plastic deformation behaviors of a Mg-Ce-Zn-Zr alloy. Scripta Materialia[J].2003,48(9):1319-1323.
[47] Maksoud I A, Ahmed H, R O Del J. Investigation of the effect of strain rate and temperature on thedeformability and microstructure evolution of AZ31magnesium alloy. Materials Science and EngineeringA[J].2009,504(1):40-48.
[48] Reed-Hill R E, Robertson W D. Acta Metall[J].1957,5:728-737.
[49] Wonziewicz B C, Backofen W A. Plasticity of Magnesium Crystals. Trans AIME[J].1967,239:1422.
[50] Ward Flynn P, Mote J, Dorn J E. Trans. TMS-AIME[J].1961,221:1148-1154.
[51] Barnett M R. A taylor model based description of the proof stress of magnesium AZ31during hotworking. Metallurgical and Materials Transactions A[J].2003,34:1799-1806.
[52] Boehlert C J, Chen Z, Chakkedath A, et al. In-situ analysis of the tensile deformation mechanisms inextruded Mg-1Mn-1Nd (wt.%). Philosophical Magazine[J].2012.
[53] Koike J, Ohyama R. Geometrical criterion for the activation of prismatic slip in AZ61Mg alloy sheetsdeformed at room temperature. Acta Materialia[J].2005,53(7):1963-1972.
[54] Barnett M R, Keshavarz Z, Ma X. A semianalytical sachs model for the flow stress of a magnesiumalloy. Metallurgical and Materials Transactions A[J].2006,37(7):2283-2293.
[55] Akhtar A, Teghtsoonian E. Solid solution strengthening of magnesium single crystals--ii the effect ofsolute on the ease of prismatic slip. Acta Metallurgica[J].1969,17(11):1351-1356.
[56] Poirier J. P.,关德林.晶体的高温塑性变形.大连:大连理工大学出版社,1989.
[57] Minonishi Y. Plastic deformation of single crystals of Ti3Al with D019structure. PhilosophicalMagazine A[J].1991,63(5):1085-1093.
[58] Parkhomenko T A, Pustovalov V V. The Low-Temperature Yield Stress Anomaly in Metals and Alloys.physica status solidi (a)[J].1982,74(1):11-42.
[59] Suzuki T, Oya Y, Wee D M. Transition from positive to negative temperature dependence of thestrength in Ni3Ge-Fe3Ge solid solution. Acta Metallurgica[J].1980,28(3):301-310.
[60] Dang M W, Noguchi O, Oya Y, et al. New Ll2ordered alloys having the positive temperaturedependence of strength. Transactions of the Japan Institute of Metals[J].1980, vol.21, no.4:237-247.
[61] Takeuchi S, Kuramoto E. Temperature and orientation dependence of the yield stress in Ni{in3}Gasingle crystals. Acta Metallurgica[J].1973,21(4):415-425.
[62] Smola B, Stul kova I, von Buch F, et al. Structural aspects of high performance mg alloys design.Materials Science and Engineering A[J].2002,324(1-2):113-117.
[63]何上明. Mg-Gd-Y-Zr (-Ca)合金的微观组织演变、性能和断裂行为研究.[博士论文].上海:上海交通大学.2007.
[64] Nie J F. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys.Scripta Materialia[J].2003,48(8):1009-1015.
[65] Yin D D, Wang Q D, Gao Y, et al. Effects of heat treatments on microstructure and mechanicalproperties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) alloy. Journal of Alloys and Compounds[J].2011,509(5):1696-1704.
[1] Dieter G E. Mechanical metallurgy.3rd ed. New York: McGraw-Hill,1986:67.
[2] Wilshire B, Burt H. Damage evolution during creep of steels. International Journal of Pressure Vesselsand Piping[J].2008,85(1-2):47-54.
[3] Dyson B F, Gibbons T B. Tertiary creep in nickel-base superalloys: analysis of experimental data andtheoretical synthesis. Acta Metallurgica[J].1987,35(9):2355-2369.
[4] Blum W, Li Y, Zeng X, et al. Creep deformation mechanisms in high-pressure die-castmagnesium-aluminum-base alloys. Metallurgical and Materials Transactions A[J].2005,36:1721-1728.
[5] Yin D D, Wang Q D, Boehlert C J, et al. Creep and fracture behavior of peak-agedMg-11Y-5Gd-2Zn-0.5Zr (wt pct). Metallurgical and Materials Transactions A[J].2012,43(9):3338-3350.
[6] Dunand D C, Han B Q, Jansen A M. Monkman-grant analysis of creep fracture indispersion-strengthened and particulate-reinforced aluminum. Metallurgical and Materials Transactions A[J].1999,30(3):829-838.
[7] Pekguleryuz M, Celikin M. Creep resistance in magnesium alloys. International Materials Reviews[J].2010,55(4):197-217.
[8] Vagarali S S, Langdon T G. Deformation mechanisms in HCP metals at elevated temperatures-I. creepbehavior of magnesium. Acta Metallurgica[J].1981,29(12):1969-1982.
[9] Vagarali S S, Langdon T G. Deformation mechanisms in HCP metals at elevated temperatures-II. creepbehavior of a Mg-0.8-percent Al solid solution alloy. Acta Metallurgica[J].1982,30(6):1157-1170.
[10] Ishikawa K, Watanabe H, Mukai T. High temperature compressive properties over a wide range ofstrain rates in an AZ31magnesium alloy. Journal of Materials Science[J].2005,40(7):1577-1582.
[11] Meyers M A, Chawla K K. Mechanical Behavior of Materials. Cambridge University Press,2009.
[12] Levitin V. High Temperature Strain of Metals and Alloys: Physical Fundamentals. Wiley-VCH,2006:180.
[13] Milika K, Adek J, Ry P. High temperature creep mechanisms in magnesium. Acta Metallurgica[J].1970,18(10):1071-1082.
[14] Mordike B L. Creep-resistant magnesium alloys. Materials Science and Engineering A[J].2002,324(1-2):103-112.
[15] Miannay D P. Time-dependent fracture mechanics. New York: Springer,2001:313.
[16] Burt H, Wilshire B. Theoretical and practical implications of creep curve shape analyses for2124and2419. Metallurgical and Materials Transactions A[J].2004,35(6):1691-1701.
[17] Ashby M F, Dyson B F. Creep damage mechanics and micromechanisms. In Advances in fractureresearch, Valluri R S, Oxford and New York:Pergamon Press,1984:1,3-30.
[18] Burt H, Wilshire B. Theoretical and practical implications of creep curve shape analyses for7010and7075. Metallurgical and Materials Transactions A[J].2006,37(3):1005-1015.
[19] Burt H, Wilshire B. Theoretical and practical implications of creep curve shape analyses for8090.Metallurgical and Materials Transactions A[J].2005,36(5):1219-1227.
[20] Povolo F. Comments on the Monkman-Grant and the modified Monkman-Grant relationships. Journalof Materials Science[J].1985,20:2005-2010.
[21] Sundararajan G. The Monkman-Grant relationship. Materials Science and Engineering A[J].1989,112:205-214.
[22] Monkman F C, Grant N J. Proc. Astm.[J].1956,56:593-620.
[23] Dobes F, Milicka K. Met. Sci.[J].1976,10:382-384.
[24] Boehlert C J, Miracle B D. Part II. The creep behavior of Ti-AI-Nb O+Bcc orthorhombic alloys.Metallurgical and Materials Transactions A[J].1999,30(9):2349-2367.
[25] Galiyev A, Kaibyshev R, Gottstein G. Correlation of plastic deformation and dynamic recrystallizationin magnesium alloy Zk60. Acta Materialia[J].2001,49(7):1199-1207.
[26] Jones R B, Harris J E. Creep deformation of polycrystalline magnesium. Archive: Proceedings of theInstitution of Mechanical Engineers, Conference Proceedings1964-1970(Vols178-184)[J].1963,178(31):1-8.
[27] He S M, Zeng X Q, Peng L M, et al. Microstructure and strengthening mechanism of high strengthMg-10Gd-2Y-0.5Zr alloy. Journal of Alloys and Compounds[J].2007,427(1-2):316-323.
[28] Nie J F, Muddle B. Characterisation of strengthening precipitate phases in a Mg-Y-Nd alloy. ActaMaterialia[J].2000,48(8):1691-1703.
[29] He S M, Zeng X Q, Peng L M, et al. Precipitation in a Mg-10Gd-3Y-0.4Zr (wt.%) alloy duringisothermal ageing at250°c. Journal of Alloys and Compounds[J].2006,421(1-2):309-313.
[30] Apps P J, Lorimer G W, Karimzadeh H, et al. Precipitation Processes in Magnesium-Heavy Rare EarthAlloys during Ageing at300°C. In Magnesium Alloys and Their Applications, Wiley-VCH Verlag GmbH&Co. KGaA,2006,53-58.
[31] Yin D D, Wang Q D, Gao Y, et al. Effects of heat treatments on microstructure and mechanicalproperties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) alloy. Journal of Alloys and Compounds[J].2011,509(5):1696-1704.
[32] Couret A, Caillard D. An in situ study of prismatic glide in magnesium--i. The rate controllingmechanism. Acta Metallurgica[J].1985,33(8):1447-1454.
[33] Obara T.,Yoshinga H.,Morozumi S.{1122}〈1123〉slip system in magnesium. Acta Metallurgica[J].1973,21(7):845-853.
[34] Chapuis A, Driver J H. Temperature dependency of slip and twinning in plane strain compressedmagnesium single crystals. Acta Materialia[J].2011,59(5):1986-1994.
[35] P U Schl W. Models for dislocation cross-slip in close-packed crystal structures: a critical review.Progress in Materials Science[J].2002,47(4):415-461.
[36] Hutchinson W B, Barnett M R. Effective values of critical resolved shear stress for slip inpolycrystalline magnesium and other hcp metals. Scripta Materialia[J].2010,63(7):737-740.
[37] Agnew S R, Horton J A, Yoo M H. Transmission electron microscopy investigation ofdislocations in mg and alpha-solid solution mg-li alloys. Metallurgical and Materials Transactions A[J].2002,33(3):851-858.
[38] Keshavarz Z, Barnett M R. EBSD analysis of deformation modes in Mg–3Al–1Zn. ScriptaMaterialia[J].2006,55(10):915-918.
[39] Yoo M H, Morris J R, Ho K M, et al. Nonbasal deformation modes of hcp metals and alloys: role ofdislocation source and mobility. Metallurgical and Materials Transactions A[J].2002,33(3):813-822.
[40] Couret A, Caillard D. An in situ study of prismatic glide in magnesium--ii. Microscopic activationparameters. Acta Metallurgica[J].1985,33(8):1455-1462.
[41] Akhtar A, Teghtsoonian E. Solid solution strengthening of magnesium single crystals--ii the effect ofsolute on the ease of prismatic slip. Acta Metallurgica[J].1969,17(11):1351-1356.
[42] Akhtar A, Teghtsoonian E. Solid solution strengthening of magnesium single crystals—I alloyingbehaviour in basal slip. Acta Metallurgica[J].1969,17(11):1339-1349.
[43] Boehlert C J, Chen Z, Guti E Rrez-Urrutia I, et al. In situ analysis of the tensile and tensile-creepdeformation mechanisms in rolled AZ31. Acta Materialia[J].2011,60:1889-1904.
[44] Koike J, Kobayashi T, Mukai T, et al. The activity of non-basal slip systems and dynamic recovery atroom temperature in fine-grained az31b magnesium alloys. Acta Materialia[J].2003,51(7):2055-2065.
[45] Smallman R E, Bishop R J. Modern physical metallurgy and materials engineering.Butterworth-Heinemann,1999.
[46] Liu T S, Fields R J, Fariborz S J, et al. Experimental observations and analysis of creep cavitation inAISI type304stainless steel. Acta Metallurgica[J].1988,36(9):2481-2491.
[47] Delph T J. Some selected topics in creep cavitation. Metallurgical and Materials Transactions A[J].2002,33(2):383-390.
[48] Chen I W, Argon A S. Creep cavitation in304stainless steel. Acta Metallurgica[J].1981,29(7):1321-1333.
[1] Luo A, Pekguleryuz M O. Cast magnesium alloys for elevated-temperature applications. Journal ofMaterials Science[J].1994,29(20):5259-5271.
[2] Mordike B L, Stulíková I, Smola B. Mechanisms of creep deformation in Mg-Sc-based alloys.Metallurgical and Materials Transactions A[J].2005,36:1729-1736.
[3]陈振华.耐热镁合金.化学工业出版社,2007.
[4]高岩. Mg-Y-Gd-Zn-Zr镁合金组织、性能及其蠕变行为研究.[博士论文].上海:上海交通大学.2009.
[5] King J F. Development of practical high temperature magnesium casting alloys. In Magnesium Alloysand Their Applications, New York:Wiley,2000,14-22.
[6] Mordike B L. Creep-resistant magnesium alloys. Materials Science and Engineering A[J].2002,324(1-2):103-112.
[7] Henry S D, Sanders B R, Hrivnak N, et al. ASM Specialty Handbook: Aluminum and AluminumAlloys.1993:41.
[8] Okamoto K, Sasaki M, Takahashi N, et al. Applicability of Mg-Zn-(Y, Gd) Alloys for Engine Pistons.Magnesium Technology.2011.73-78.
[9]郭国庆,谢敬佩,王杰芳等.内燃机活塞材料及其相关技术.拖拉机与农用运输车[J].2004(3):9-11.
[10]陈长江,王渠东,尹冬弟等.内燃机活塞材料的研究进展.材料导报[J].2009,23(15):62-65.
[11]任书坤.汽车发动机活塞用铝合金.汽车技术[J].1994(4):32-37.
[12] Miannay D P. Time-dependent fracture mechanics. New York: Springer,2001:313.
[13] Burt H, Wilshire B. Theoretical and practical implications of creep curve shape analyses for2124and2419. Metallurgical and Materials Transactions A[J].2004,35(6):1691-1701.
[14] Ashby M F, Dyson B F. Creep damage mechanics and micromechanisms. In Advances in fractureresearch, Valluri R S, Oxford and New York:Pergamon Press,1984:1,3-30.
[15] Zhu S, Nie J, Mordike B. Creep and rupture properties of a squeeze-cast Mg-Al-Ca alloy.Metallurgical and Materials Transactions A[J].2006,37:1221-1229.
[16] Beals R S, Liu Z K, Wayne Jones J, et al. Usamp magnesium powertrain cast components:fundamental research summary. JOM[J].2007,59(8):43-48.
[17] Aghion E, Bronfin B, Von Buch F, et al. Newly developed magnesium alloys for powertrainapplications. JOM[J].2003,55(11): A30-A33.
[18] Yin D D, Wang Q D, Boehlert C J, et al. Creep and fracture behavior of peak-agedMg-11Y-5Gd-2Zn-0.5Zr (wt pct). Metallurgical and Materials Transactions A[J].2012,43(9):3338-3350.
[19] Kassner M E, Perez-Prado M T. Five-Power-Law Creep in Single Phase Metals and Alloys. Progressin Materials Science[J].2000,45(1):1-102.
[20] Dieter G E. Mechanical metallurgy.3rd ed. New York: McGraw-Hill,1986:67.
[21] Pekguleryuz M, Celikin M. Creep resistance in magnesium alloys. International Materials Reviews[J].2010,55(4):197-217.
[22] Shi L, Northwood D. Recent progress in the modeling of high-temperature creep and its application toalloy development. Journal of Materials Engineering and Performance[J].1995,4(2):196-211.
[23] Blum W, Eisenlohr P, Breutinger F. Understanding Creep-A Review. Metallurgical and MaterialsTransactions A[J].2002,33(2):291-303.
[24] Dyson B F, Gibbons T B. Tertiary creep in nickel-base superalloys: analysis of experimental data andtheoretical synthesis. Acta Metallurgica[J].1987,35(9):2355-2369.
[25] Dyson B F, Mclean M. Particle-coarsening, σ0and tertiary creep. Acta Metallurgica[J].1983,31(1):17-27.
[26] Wilshire B, Burt H. Damage evolution during creep of steels. International Journal of Pressure Vesselsand Piping[J].2008,85(1-2):47-54.
[27] Williams K R, Wilshire B. Effects of microstructural instability on the creep and fracture behaviour offerritic steels. Materials Science and Engineering[J].1977,28(2):289-296.
[28] Zhang P, Watzinger B, Blum W. Changes in Microstructure and Deformation Resistance during Creepof the Die-Cast Mg–Al-Base Alloy AZ91hp at Intermediate Temperatures up to150°C. Physica StatusSolidi (a)[J].1999,175(2):481-489.
[29] Ashby M F, Gandhi C, Taplin D. Fracture-Mechanism Maps and their Construction for Fcc Metalsand Alloys. Acta Metallurgica[J].1979,27(5):699-729.
[30] Gandhi C, Ashby M F. Fracture-Mechanism Maps for Materials Which Cleave-Fcc, Bcc and HcpMetals and Ceramics. Acta Metallurgica[J].1979,27(10):1565-1602.
[31] Stevens R A, Flewitt P E J. The dependence of creep rate on microstructure in aγ' strengthenedsuperalloy. Acta Metallurgica[J].1981,29(5):867-882.
[32] Smallman R E, Bishop R J. Modern physical metallurgy and materials engineering.Butterworth-Heinemann,1999.
[33] Cahn R W, Haasen P. Physical Metallurgy Volume III.4th ed. Amsterdam: North-Holland,1996.
[34] Levitin V. High Temperature Strain of Metals and Alloys: Physical Fundamentals. Wiley-VCH,2006:180.
[35] Vagarali S S, Langdon T G. Deformation mechanisms in HCP metals at elevated temperatures-I. creepbehavior of magnesium. Acta Metallurgica[J].1981,29(12):1969-1982.
[36] Vagarali S S, Langdon T G. Deformation mechanisms in HCP metals at elevated temperatures-II.creep behavior of a Mg-0.8-percent Al solid solution alloy. Acta Metallurgica[J].1982,30(6):1157-1170.
[37] Milika K, Adek J, Ry P. High temperature creep mechanisms in magnesium. Acta Metallurgica[J].1970,18(10):1071-1082.
[38] Shi L, Northwood D O. Strain-hardening and recovery during the creep of pure polycrystallinemagnesium. Acta Metallurgica[J].1994,42(3):871-877.
[39] Somekawa H, Hirai K, Watanabe H, et al. Dislocation creep behavior in Mg-Al-Zn alloys. MaterialsScience and Engineering a[J].2005,407(1-2):53-61.
[40] Miller W K. Creep of die cast AZ91magnesium at room temperature and low stress. Metallurgical andMaterials Transactions a[J].1991,22(4):873-877.
[41] Regev M, Aghion E, Berger S, et al. Dislocation analysis of crept AZ91D ingot castings. MaterialsScience and Engineering a[J].1998,257(2):349-352.
[42] Regev M, Aghion E, Rosen A, et al. Creep studies of coarse-grained AZ91D magnesium castings.Materials Science and Engineering a[J].1998,252(1):6-16.
[43] Zhao P, Wang Q, Zhai C, et al. Effects of strontium and titanium on the microstructure, tensileproperties and creep behavior of AM50alloys. Materials Science and Engineering A[J].2007,444(1-2):318-326.
[44] Boehlert C J, Knittel K. The microstructure, tensile properties, and creep behavior of Mg-Zn alloyscontaining0-4.4wt.%Zn. Materials Science and Engineering A[J].2006,417(1-2):315-321.
[45] Boehlert C J. The tensile and creep behavior of Mg-Zn alloys with and without Y and Zr as ternaryelements. Journal of Materials Science[J].2007,42(10):3675-3684.
[46] Suzuki M, Sato H, Maruyama K, et al. Creep behavior and deformation microstructures of Mg-Yalloys at550K. Materials Science and Engineering A[J].1998,252(2):248-255.
[47] Suzuki M, Sato H, Maruyama K, et al. Creep deformation behavior and dislocation substructures ofMg-Y binary alloys. Materials Science and Engineering A[J].2001,319-321(""):751-755.
[48] Anyanwu I A, Kamado S, Kojima Y. Creep properties of Mg-Gd-Y-Zr alloys. MaterialsTransactions[J].2001,42(7):1212-1218.
[49] Wang J G, Hsiung L M, Nieh T G, et al. Creep of a heat treated Mg-4Y-3RE alloy. Materials Scienceand Engineering a[J].2001,315(1-2):81-88.
[50] Hnilica F, Jan K V, Smola B, et al. Creep behaviour of the creep resistant MgY3Nd2Zn1Mn1alloy.Materials Science and Engineering A[J].2008,489(1-2):93-98.
[51] Morgan J E, Mordike B L. An investigation into creep-resistant, as-cast magnesium alloys containingyttrium, zinc, neodymium and zirconium. Metallurgical and Materials Transactions A[J].1981,12(9):1581-1585.
[52] Wang Q D, Li D Q, Blandin J J, et al. Microstructure and creep behavior of the extrudedMg-4Y-4Sm-0.5Zr alloy. Materials Science and Engineering A[J].2009,516(1-2):189-192.
[53] Janik V, Yin D D, Wang Q D, et al. The Elevated-Temperature Mechanical Behavior of peak-agedMg-10Gd-3Y-0.4Zr Alloy. Materials Science and Engineering A[J].2011,528:3105-3122.
[54] Raynor G V. The physical metallurgy of magnesium and its alloys. Pergamon,1959.
[55] Mordike B L, Kainer K U. Magnesium Alloys and Their Applications. New York: Wiley,2000:816.
[56] Shi L, Northwood D O. Strain-hardening and recovery during the creep of pure polycrystallinemagnesium. Acta Metallurgica[J].1994,42(3):871-877.
[57] Maruyama K, Suzuki M, Sato H. Creep strength of magnesium-based alloys. Metallurgical andMaterials Transactions A[J].2002,33(3):875-882.
[58] Dunand D C, Han B Q, Jansen A M. Monkman-grant analysis of creep fracture indispersion-strengthened and particulate-reinforced aluminum. Metallurgical and Materials Transactions A[J].1999,30(3):829-838.
[59] Zheng K Y, Zeng X Q, Dong J, et al. Effect of initial temper on the creep behavior of a Mg–Gd–Nd–Zr alloy. Materials Science and Engineering A[J].2008,492(1-2):185-190.
[60] Yoo M H. Slip, twinning, and fracture in hexagonal close-packed metals. Metallurgical and MaterialsTransactions A[J].1981,12(3):409-418.
[61] Yoo M H M J. Nonbasal Deformation Modes of Hcp Metals and Alloys: Role of Dislocation Sourceand Mobility. Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science[J].2002,33(3):813-822.
[62] Couret A, Caillard D. An in situ study of prismatic glide in magnesium--i. The rate controllingmechanism. Acta Metallurgica[J].1985,33(8):1447-1454.
[63] P U Schl W. Models for dislocation cross-slip in close-packed crystal structures: a critical review.Progress in Materials Science[J].2002,47(4):415-461.
[64] Cadek J. Creep in Metallic Materials. Amsterdam:1988.
[65] Jansen A M, Dunand D C. Creep of metals containing high volume fractions of unshearabledispersoids.2. Experiments in the Al-Al2O3system and comparison to models. Acta Materialia[J].1997,45(11):4583-4592.
[66] Dunand D C, Jansen A M. Creep of metals containing high volume fractions of unshearabledispersoids--Part I. Modeling the effect of dislocation pile-ups upon the detachment threshold stress. ActaMaterialia[J].1997,45(11):4569-4581.
[67] Blum W, Li Y, Zeng X, et al. Creep deformation mechanisms in high-pressure die-castmagnesium-aluminum-base alloys. Metallurgical and Materials Transactions A[J].2005,36:1721-1728.
[68] Ardell A J. Precipitation hardening. Metallurgical Transactions A[J].1985,16(12):2131-2165.
[69] Meyers M A, Chawla K K. Mechanical Behavior of Materials. Cambridge University Press,2009.
[70] Mabuchi M, Higashi K. Strengthening mechanisms of Mg-Si alloys. Acta Materialia[J].1996,44(11):4611-4618.
[71] Nie J F. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys.Scripta Materialia[J].2003,48(8):1009-1015.
[72] Smola B, Stul kova I, von Buch F, et al. Structural aspects of high performance mg alloys design.Materials Science and Engineering A[J].2002,324(1-2):113-117.
[73] Clark J B. Transmission electron microscopy study of age hardening in a Mg-5wt.%Zn alloy. ActaMetallurgica[J].1965,13(12):1281-1289.
[74] Clark J B. Age hardening in a Mg-9wt.%Al alloy. Acta Metallurgica[J].1968,16(2):141-152.
[75] Celotto S. TEM study of continuous precipitation in Mg-9Wt%Al-l Wt%Zn alloy. Acta Materialia[J].2000,48(8):1775-1787.
[76] Antion C, Donnadieu P, Perrard F, et al. Hardening precipitation in a Mg-4Y-3RE alloy. ActaMaterialia[J].2003,51(18):5335-5348.
[77] Wei L Y, Dunlop G L, Westengen H. Precipitation hardening of Mg-Zn and Mg-Zn-RE alloys.Metallurgical and Materials Transactions A[J].1995,26(7):1705-1716.
[78] Zhu Y M, Morton A J, Nie J F. Improvement in the age-hardening response of Mg-Y-Zn alloys by Agadditions. Scripta Materialia[J].2008,58(7):525-528.
[79] Luo A A. Recent magnesium alloy development for elevated temperature applications. InternationalMaterials Reviews[J].2004,49(1):13-30.
[80] Pekguleryuz M O, Kaya A A. Creep resistant magnesium alloys for powertrain applications.Advanced Engineering Materials[J].2003,5(12):866-878.
[81] Mordike B L, Ebert T. Magnesium Properties-applications-potential. Materials Science andEngineering A[J].2001,302:37-45.
[82]何上明. Mg-Gd-Y-Zr (-Ca)合金的微观组织演变、性能和断裂行为研究.[博士论文].上海:上海交通大学.2007.
[83] Kainer K U. Magnesium Alloys and Technologies. Wiley-VCH,2003:293.
[84] Friedrich H E, Mordike B L. Magnesium Technology. Springer,2006:677.
[85] He S M, Zeng X Q, Peng L M, et al. Microstructure and strengthening mechanism of high strengthMg-10Gd-2Y-0.5Zr alloy. Journal of Alloys and Compounds[J].2007,427(1-2):316-323.
[86] Zhang M X, Kelly P M. Morphology and crystallography of Mg24Y5precipitate in Mg-Y alloy. ScriptaMaterialia[J].2003,48(4):379-384.
[87] Nie J F, Muddle B. Characterisation of strengthening precipitate phases in a Mg-Y-Nd alloy. ActaMaterialia[J].2000,48(8):1691-1703.
[88] Honma T, Ohkubo T, Kamado S, et al. Effect of Zn additions on the age-hardening ofMg-2.0Gd-1.2Y-0.2Zr alloys. Acta Materialia[J].2007,55(12):4137-4150.
[89] Smola B, Stulikova I, Pelcov A J, et al. Significance of stable and metastable phases in hightemperature creep resistant magnesium-rare earth base alloys. Journal of alloys and compounds[J].2004,378(1-2):196-201.
[90] Liu H, Gao Y, Liu J Z, et al. A simulation study of the shape of β′precipitates in Mg–Y andMg–Gd alloys. Acta Materialia[J].2013,61(2):453-466.
[91] Gao Y, Liu H, Shi R, et al. Simulation study of precipitation in an Mg--Y--Nd alloy. ActaMaterialia[J].2012,60(12):4819-4832.
[92] Yin D D, Wang Q D, Gao Y, et al. Effects of heat treatments on microstructure and mechanicalproperties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) alloy. Journal of Alloys and Compounds[J].2011,509(5):1696-1704.
[93] Gao X, He S M, Zeng X Q, et al. Microstructure evolution in a Mg-15Gd-0.5Zr (wt.%) alloy duringisothermal aging at250℃. Materials Science and Engineering A[J].2006,431(1-2):322-327.
[94] Zheng L, Liu C, Wan Y, et al. Microstructures and mechanical properties ofMg-10Gd-6Y-2Zn-0.6Zr(wt.%) alloy. Journal of Alloys and Compounds[J].2011,509(35):8832-8839.
[95] Gao L, Chen R S, Han E H. Microstructure and strengthening mechanisms of a cast Mg--1.48Gd--1.13Y--0.16Zr (at.\%) alloy. Journal of materials science[J].2009,44(16):4443-4454.
[96] Apps P J, Karimzadeh H, King J F, et al. Precipitation reactions in magnesium-rare earth alloyscontaining yttrium, gadolinium or dysprosium. Scripta materialia[J].2003,48(8):1023-1028.
[97] Zhu Y M, Morton A J, Nie J F. The18R and14H long-period stacking ordered structures in Mg-Y-Znalloys. Acta Materialia[J].2010,58(8):2936-2947.
[98] Zhu Y M, Weyland M, Morton A J, et al. The building block of long-period structures in Mg-RE-Znalloys. Scripta Materialia[J].2009,60(11):980-983.
[99] Abe E, Kawamura Y, Hayashi K, et al. Long-period ordered structure in a high-strengthnanocrystalline Mg-1at%Zn-2at%Y alloy studied by atomic-resolution Z-contrast STEM. ActaMaterialia[J].2002,50(15):3845-3857.
[100] Gao Y, Wang Q D, Gu J H, et al. Comparison of microstructure in Mg-10Y-5Gd-0.5Zr andMg-10Y-5Gd-2Zn-0.5Zr alloys by conventional casting. Journal of Alloys and Compounds[J].2009,477:374-378.
[101] Chino Y, Mabuchi M, Hagiwara S, et al. Novel equilibrium two phase Mg alloy with the long-periodordered structure. Scripta Materialia[J].2004,51(7):711-714.
[102] Yamada K, Okubo Y, Shiono M, et al. Alloy development of high toughness Mg-Gd-Y-Zn-Zr alloys.Materials Transactions[J].2006,47(4):1066-1070.
[103] Ping D H, Hono K, Kawamura Y, et al. Local chemistry of a nanocrystalline high-strength Mg97Y2Zn1alloy. Philosophical magazine letters[J].2002,82(10):543-551.
[104] Suzuki M, Kimura T, Koike J, et al. Strengthening effect of Zn in heat resistant Mg-Y-Zn solidsolution alloys. Scripta Materialia[J].2003,48(8):997-1002.
[105] Suzuki M, Kimura T, Koike J, et al. Effects of zinc on creep strength and deformation substructures inMg-Y alloy. Materials Science and Engineering A[J].2004,387-389:706-709.
[106] Sherby O D, Burke P M. Mechanical behavior of crystalline solids at elevated temperature. Progress inMaterials Science[J].1968,13(7):323-390.
[107] Mohamed F A, Langdon T G. The transition from dislocation climb to viscous glide in creep of solidsolution alloys. Acta Metallurgica[J].1974,8(3):823-828.
[108] Kong Q P, Li Y. Investigation of the climb of extended dislocations during high-temperature creep.Philosophical Magazine A[J].1993,68(1):113-119.
[109] Galiyev A, Sitdikov O, Kaibyshev R. Deformation behavior and controlling mechanisms for plasticflow of magnesium and magnesium alloy. Materials Transactions[J].2003,44(4):426-435.
[110] Stanford N, Geng J, Chun Y B, et al. Effect of plate-shaped particle distributions on the deformationbehaviour of magnesium alloy AZ91in tension and compression. Acta Materialia[J].2012,60(1):218-228.
[111]张俊善.材料的高温变形与断裂.北京:科学出版社,2007.
[112] Kassner M E, Pérez-Prado M T. Fundamentals of Creep in Metals and Alloys. ELSEVIER,2004:288.
[113]平修二.金属材料的高温强度.北京:科学出版社,1995:535.
[114] Yamasaki M, Sasaki M, Nishijima M, et al. Formation of14H long period stacking ordered structureand profuse stacking faults in Mg-Zn-Gd alloys during isothermal aging at high temperature. ActaMaterialia[J].2007,55(20):6798-6805.
[115] Matsuda M, Ii S, Kawamura Y, et al. Variation of long-period stacking order structures in rapidlysolidified Mg97Zn1Y2alloy. Materials Science and Engineering a[J].2005,393(1-2):269-274.
[116] Itoi T, Seimiya T, Kawamura Y, et al. Long period stacking structures observed in Mg97Zn1Y2alloy.Scripta Materialia[J].2004,51(2):107-111.
[117] Grobner J, Kozlov A, Fang X Y, et al. Phase equilibria and transformations in ternary Mg-richMg-Y-Zn alloys. Acta Materialia[J].2012.
[118] Wu Y J, Zeng X Q, Lin D L, et al. The microstructure evolution with lamellar14H-type LPSOstructure in an Mg96.5Gd2.5Zn1alloy during solid solution heat treatment at773k. Journal of Alloys andCompounds[J].2009,477(1-2):193-197.
[119] Wu Y J, Lin D L, Zeng X Q, et al. Formation of a lamellar14h-type long period stacking orderedstructure in an as-cast Mg-Gd-Zn-Zr alloy. Journal of Materials Science[J].2009,44(6):1607-1612.
[120] Nishida M, Kawamura Y, Yamamuro T. Formation process of unique microstructure in rapidlysolidified Mg97Zn1Y2alloy. Materials Science and Engineering A[J].2004,375-377:1217-1223.
[121] Luo Z P, Zhang S Q, Tang Y L, et al. Microstructures of Mg-Zn-Zr-RE alloys with high RE and lowZn contents. Journal of Alloys and Compounds[J].1994,209(1-2):275-278.
[122] Langdon T G. The role of grain boundaries in high temperature deformation. Materials Science andEngineering A[J].1993,166(1-2):67-79.
[123] Gifkins R C. Grain-boundary participation in high-temperature deformation: An historical review.Materials Characterization[J].1994,32(2):59-77.
[124] Morento I P, Nandy T K, Jones J W, et al. Microstructural stability and creep of rare-earth containingmagnesium alloys. Scripta Materialia[J].2003,48:1029-1034.
[125] Zhang J S, Li P E, Chen W X, et al. Grain boundary precipitation strengthening in high temperaturecreep of Fe-15Cr-25Ni alloys. Scripta Metallurgica[J].1989,23(4):547-551.
[126] Sun W P, Jonas J J. Influence of dynamic precipitation on grain boundary sliding during hightemperature creep. Acta Metallurgica[J].1994,42(1):283-292.
[127]屠海令,干勇.金属材料理化测试全书.化学工业出版社,2007.
[128] Jing B, Yangshan S, Shan X, et al. Microstructure and tensile creep behavior of Mg-4Al basedmagnesium alloys with alkaline-earth elements Sr and Ca additions. Materials Science and Engineering:A[J].2006,419(1-2):181-188.
[129] Srinivasan A, Swaminathan J, Gunjan M K, et al. Effect of intermetallic phases on the creep behaviorof AZ91magnesium alloy. Materials Science and Engineering: A[J].2010,527(6):1395-1403.
[130] Spigarelli S, Regev M, Evangelista E, et al. Review of creep behavior of AZ91magnesium alloyproduced by different technologies. Materials Science and Technology[J].2001,17:627-638.
[131] Luo A A, Balogh M P, Powell B R. Creep and microstructure of magnesium-aluminum-calcium basedalloys. Metallurgical and Materials Transactions A[J].2001,33:567-574.
[132] Sedláek R, Blum W. Microstructure-based constitutive law of plastic deformation. ComputationalMaterials Science[J].2002,25(1-2):200-206.
[133] Pandey A B, Mishra R S, Mahajan Y R. Steady state creep behaviour of silicon carbide particulatereinforced aluminium composites. Acta Metallurgica[J].1992,40(8):2045-2052.
[134] Park K T, Lavernia E J, Mohamed F A. High temperature creep of silicon carbide particulatereinforced aluminum. Acta Metallurgica[J].1990,38(11):2149-2159.
[135] Delph T J. Some selected topics in creep cavitation. Metallurgical and Materials Transactions A[J].2002,33(2):383-390.
[136] Davanas K, Solomon A A. Theory of intergranular creep cavity nucleation, growth and interaction.Acta Metallurgica[J].1990,38(10):1905-1916.
[137] Kassner M E, Hayes T A. Creep Cavitation in Metals. International Journal of Plasticity[J].2003,19(10):1715-1748.
[138] Chen I W, Argon A S. Creep cavitation in304stainless steel. Acta Metallurgica[J].1981,29(7):1321-1333.
[139] Raj R, Ashby M F. Intergranular fracture at elevated temperature. Acta Metallurgica[J].1975,23(6):653-666.
[140] Svensson L E, Dunlop G L. Growth of intergranular creep cavities. International Metals Reviews[J].1981,26(1):109-131.
[141] Shibutani T, Kitamura T, Ohtani R. Creep cavity growth under interaction between lattice diffusionand grain-boundary diffusion. Metallurgical and Materials Transactions A[J].1998,29(10):2533-2542.
[142] Dyson B F. Constraints on diffusional cavity growth rates. Metal Science[J].1976,10(10):349-353.
[143] Needleman A, Rice J R. Plastic creep flow effects in the diffusive cavitation of grain boundaries. ActaMetallurgica[J].1980,28(10):1315-1332.
[144] Chen I W. Cavity growth on a sliding grain boundary. Metallurgical and Materials Transactions A[J].1983,14(11):2289-2293.
[145] Chen I W, Argon A S. Diffusive growth of grain-boundary cavities. Acta Metallurgica[J].1981,29(10):1759-1768.
[146] Rice J R. Constraints on the diffusive cavitation of isolated grain boundary facets in creepingpolycrystals. Acta Metallurgica[J].1981,29(4):675-681.
[147] Langdon T. Grain boundary sliding revisited: Developments in sliding over four decades. Journal ofMaterials Science[J].2006,41:597-609.
[148] Stanford N, Sotoudeh K, Bate P S. Deformation mechanisms and plastic anisotropy in magnesiumalloy AZ31. Acta Materialia[J].2011.
[149] Janík V, Hnilica F, Zuna P, et al. Cavitation and grain boundary sliding during creep ofMg-Y-Nd-Zn-Mn alloy. Transactions of Nonferrous Metals Society of China[J].2008,18(Supplement1):s64-s68.
[150] Kottada R S, Chokshi A H. Grain boundary sliding during diffusion and dislocation creep in a Mg-0.7pct Al alloy. Metallurgical and Materials Transactions A[J].2007,38(8):1743-1749.
[151] Monkman F C, Grant N J. Proc. Astm.[J].1956,56:593-620.
[152] Hnilica F, Janik V, Smola B, et al. Creep behaviour of the creep resistant MgY3Nd2Zn1Mn1alloy.Materials Science and Engineering A[J].2008,489(1-2):93-98.
[153] Sundararajan G. The Monkman-Grant relationship. Materials Science and Engineering A[J].1989,112(4):205-214.
[154] Povolo F. Comments on the Monkman-Grant and the modified Monkman-Grant relationships. Journalof Materials Science[J].1985,20:2005-2010.
[1]温树德.活塞设计及新型活塞材料.轻型汽车技术[J].1997(1):33-37.
[2]陈长江.发动机活塞用耐热稀土镁合金的开发研究.[硕士论文].上海:上海交通大学.2010.
[3] Shanghai Client Diesel Engine Co. L. http://cn.tradekey.com/selloffer_view/id/4456536.htm.
[4]郭国庆,谢敬佩,王杰芳等.内燃机活塞材料及其相关技术.拖拉机与农用运输车[J].2004(3):9-11.
[5] Avezou J. C.,薛献新.活塞材料的演变.柴油机[J].1983(2):14-23.
[6]王渠东,尹冬弟,陈长江.耐热稀土镁合金发动机活塞的低压铸造制备方法[P]: ZL200910308916.2.
[7]王渠东,尹冬弟,陈长江.耐热稀土镁合金发动机活塞的挤压铸造制备方法[P]: ZL200910308917.7.
[8]王渠东,尹冬弟,陈长江等.铸造耐热稀土镁合金发动机活塞及其制备方法[P]:200910207042.1
[9]王渠东,尹冬弟.内燃机用复合式活塞毛坯的制造方法[P]:201110107941.1
[10]任书坤.汽车发动机活塞用铝合金.汽车技术[J].1994(4):32-37.
[11]李鹏.汽车发动机活塞设计的现状及发展趋势.汽车工艺与材料[J].2008(1):5-8.
[12]张秀芳.新型活塞材料.发动机配件技术[J].1996(3):8.
[13]彭涛.内燃机活塞材料的发展与前景.山西科技[J].2007(3):91-92.
[14]赖华清.活塞材料的应用及发展.上海汽车[J].2006(12):33-35.
[15]李佳原.90年代的活塞新材料和新工艺.西南汽车科技[J].1994(003):49-52.
[16]杨忠敏.谈现代汽车的材料及其轻量化技术.汽车研究与开发[J].2003,6:18.
[17] Luo A A. Recent magnesium alloy development for elevated temperature applications. InternationalMaterials Reviews[J].2004,49(1):13-30.
[18] Pekguleryuz M O, Kaya A A. Creep resistant magnesium alloys for powertrain applications. AdvancedEngineering Materials[J].2003,5(12):866-878.
[19] Aghion E, Bronfin B, Von Buch F, et al. Newly developed magnesium alloys for powertrainapplications. JOM[J].2003,55(11): A30-A33.
[20] Luo A, Pekguleryuz M O. Cast magnesium alloys for elevated-temperature applications. Journal ofMaterials Science[J].1994,29(20):5259-5271.
[21] Mordike B L. Creep-resistant magnesium alloys. Materials Science and Engineering A[J].2002,324(1-2):103-112.
[22] Mordike B L, Ebert T. Magnesium Properties-applications-potential. Materials Science andEngineering A[J].2001,302:37-45.
[23] Mordike B L, Kainer K U. Magnesium Alloys and Their Applications. New York: Wiley,2000:816.
[24] Kainer K U. Magnesium Alloys and Technologies. Wiley-VCH,2003:293.
[25] Friedrich H E, Mordike B L. Magnesium Technology. Springer,2006:677.
[26] Das S. Magnesium for automotive applications: Primary production cost assessment. JOM[J].2003,55(11): A22-A26.
[27] Powell B R. The usamp magnesium powertrain cast components project. JOM[J].2002,54(2):49-50.
[28] Okamoto K, Sasaki M, Takahashi N, et al. Applicability of Mg-Zn-(Y, Gd) Alloys for Engine Pistons.Magnesium Technology.2011.73-78.
[29] Yin D D, Wang Q D, Boehlert C J, et al. Creep and fracture behavior of peak-agedMg-11Y-5Gd-2Zn-0.5Zr (wt pct). Metallurgical and Materials Transactions A[J].2012,43(9):3338-3350.
[30] Henry S D, Sanders B R, Hrivnak N, et al. ASM Specialty Handbook: Aluminum and AluminumAlloys.1993:41.