摘要
引文
[1].黄永光.我国钛及钛合金牌号的发展和标准化[J].稀有金属快报, 2008, (04).
[2].刘洪贵.全球经济危机中海绵钛行业现状和对策[J].攀枝花科技与信息, 2009, (01).
[3].秦莹,王少安.钛及钛合金口腔种植体的腐蚀性能研究[J].国际口腔医学杂志, 2008, 35 (4): 255-258.
[4].黄永光.外科植入用钛合金材料及其标准化[J].钛工业进展, 2002, (01).
[5].陈长春,孙.吴.髋关节置换用股骨假体材料的研究与应用[J].材料导报, 1998, (06).
[6]. Jeon, M. S.,Yoon, W. S. Appl Surf lett., 2000, 165 8.
[7]. Berbon, P. B. Processing of ultrafine-grained materials using the equal-channel angular(ECAE) pressing technique and optimiztion of the parameter to obtain superplasticity.Ph.D thesis[D]. UM.
[8].靳丽.等通道角挤压(ECAE)变形镁合金微观组织与力学性能研究[博士论文][D].上海:上海交通大学2006.
[9]. Segal, V. M. Materials processing by simple shear[J]. Materials Science and Engineering A, 1995, 197 (2): 157-164.
[10]. Iwahashi, Y.,Wang, J.,Horita, Z., etc. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials[J]. Scripta Materialia, 1996, 35 (2): 143-146.
[11]. Cao, W. Q.,Godfrey, A.,Liu, W., etc. EBSP study of the annealing behavior of aluminum deformed by equal channel angular processing[J]. Materials Science and Engineering A, 2003, 360 (1-2): 420-425.
[12]. Sun, P. L.,Yu, C. Y.,Kao, P. W., etc. Microstructural characteristics of ultrafine-grained aluminum produced by equal channel angular extrusion[J]. Scripta Materialia, 2002, 47 (6): 377-381.
[13]. Miyamoto, H.,Fushimi, J.,Mimaki, T., etc. Dislocation structures and crystal orientations of copper single crystals deformed by equal-channel angular pressing[J]. Materials Science and Engineering: A, 2005, 405 (1-2): 221-232.
[14]. Li, S.,Beyerlein, I. J.,Necker, C. T., etc. Heterogeneity of deformation texture in equal channel angular extrusion of copper[J]. Acta Materialia, 2004, 52 (16): 4859-4875.
[15]. Yamashita, A.,Horita, Z.,Langdon, T. G. Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation[J]. Materials Science and Engineering A, 2001, 300 (1-2): 142-147.
[16]. Stolyarov, V. V.,Zhu, Y. T.,Alexandrov, I. V., etc. Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling[J]. Materials Science and Engineering A, 2003, 343 (1-2): 43-50.
[17]. Stolyarov, V. V.,Zhu, Y. T.,Alexandrov, I. V., etc. Influence of ECAP routes on the microstructure and properties of pure Ti[J]. Materials Science and Engineering A, 2001, 299 (1-2): 59-67.
[18]. Semiatin, S. L.,DeLo, D. P. Equal channel angular extrusion of difficult-to-work alloys[J]. Materials & Design, 2000, 21 (4): 311-322.
[19]. Semiatin, S. L.,Berbon, P. B.,Langdon, T. G. Deformation heating and its effect on grain size evolution during equal channel angular extrusion[J]. Scripta Materialia, 2001, 44 (1): 135-140.
[20]. Shin, D. H.,Kim, I.,Kim, J., etc. Microstructure development during equal-channel angular pressing of titanium[J]. Acta Materialia, 2003, 51 (4): 983-996.
[21]. DeLo, D.,TR, B.,SL, S. Microstructure and texture evolution during equal channel angular extrusion of Ti-6Al-4V[J]. 2000, March 12-16 10.
[22]. Ko, Y. G.,Jung, W. S.,Shin, D. H., etc. Effects of temperature and initial microstructure on the equal channel angular pressing of Ti-6Al-4V alloy[J]. Scripta Materialia, 2003, 48 (2): 197-202.
[23]. Sastry, S. M. L.,Mahapatra, R. N.,Hasson, D. F. Microstructural refinement of Ti-44Al-11Nb by severe plastic deformation[J]. Scripta Materialia, 2000, 42 (7): 731-736.
[24]. Pushin, V. G.,Stolyarov, V. V.,Valiev, R. Z., etc. Nanostructured TiNi-based shape memory alloys processed by severe plastic deformation[J]. Materials Science and Engineering: A, 2005, 410-411 386-389.
[25]. Fan, Z.,Xie, C. Phase transformation behaviors of Ti-50.9at.% Ni alloy after Equal Channel Angular Extrusion[J]. Materials Letters, 2008, 62 (6-7): 800-803.
[26]. Semiatin, S. L.,Segal, V. M.,Goforth, R. E., etc. Workability of commercial-purity titanium and 4340 steel during equal channel angular extrusion at cold-working temperatures[J]. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1999, 30 (5): 1425-1435.
[27]. Valiev, R. Z.,Islamgaliev, R. K.,Alexandrov, I. V. Bulk nanostructured materials from severe plastic deformation[J]. Progress in Materials Science, 2000, 45 (2): 103-189.
[28]. LOWE, T. C. mater Sci Forum 2006, (503-504): 355-362.
[29]. Kim, I.,Kim, J.,Shin, D. H., etc. Effects of equal channel angular pressing temperature ondeformation structures of pure Ti[J]. Materials Science and Engineering A, 2003, 342 (1-2): 302-310.
[30]. Mingler, B.,Stolyarov, V. V.,Zehetbauer, M. mater Sci Forum, 2006, (503-504): 805-810.
[31]. Perlovich, Y.,M, I.,V, F. mater Sci Forum, 2006, (503-504): 853-858.
[32].胡庚祥,蔡询.材料科学基础[M].上海:上海交通大学出版社, 2000.
[33]. Ko, Y. G.,Shin, D. H.,Park, K.-T., etc. An analysis of the strain hardening behavior of ultra-fine grain pure titanium[J]. Scripta Materialia, 2006, 54 (10): 1785-1789.
[34]. Park, K. T.,Shin, D. H. Meatll Mater Trans A, 2002, (33): 705.
[35]. Yapici, G. G.,Karaman, I.,Maier, H. J. Mechanical flow anisotropy in severely deformed pure titanium[J]. Materials Science and Engineering: A, 2006, 434 (1-2): 294-302.
[36]. Vinogradov, A. Y.,Stolyarov, V. V.,Hashimoto, S., etc. Cyclic behavior of ultrafine-grain titanium produced by severe plastic deformation[J]. Materials Science and Engineering A, 2001, 318 (1-2): 163-173.
[37]. Raab, G. J.,Valiev, R. Z.,Lowe, T. C., etc. Continuous processing of ultrafine grained Al by ECAP-Conform[J]. Materials Science and Engineering A, 2004, 382 (1-2): 30-34.
[38]. Zhernakov, V. S.,Latysh, V. V.,Stolyarov, V. V., etc. The developing of nanostructured spd ti for structural use[J]. Scripta Materialia, 2001, 44 (8-9): 1771-1774.
[39]. Zhu, Y. T.,Lowe, T. C.,Langdon, T. G. Performance and applications of nanostructured materials produced by severe plastic deformation[J]. Scripta Materialia, 2004, 51 (8): 825-830.
[40]. Berbon, P. B.,Furukawa, M.,Horita, Z., etc. Influence of pressing speed on microstructural development in equal-channel angular pressing[J]. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1999, 30 (8): 1989-1997.
[41]. Furukawa, M.,Horita, Z.,Nemoto, M., etc. Review process in gof metals by equal-channel angular pressing [J]. 2001, (36): 2835-2843.
[42]. Nakashima, K.,Horita, Z.,Nemoto, M., etc. Development of a multi-pass facility for equal-channel angular pressing to high total strains[J]. Materials Science and Engineering A, 2000, 281 (1-2): 82-87.
[43]. Neishi, K.,Uchida, T.,Yamauchi, A., etc. Low-temperature superplasticity in a Cu-Zn-Sn alloy processed by severe plastic deformation[J]. Materials Science and Engineering A, 2001, 307 (1-2): 23-28.
[44]. Gholinia, A.,Prangnell, P. B.,Markushev, M. V. The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE[J]. Acta Materialia, 2000, 48 (5): 1115-1130.
[45]. Iwahashi, Y.,Horita, Z.,Nemoto, M., etc. The process of grain refinement in equal-channel angular pressing[J]. Acta Materialia, 1998, 46 (9): 3317-3331.
[46]. Zhu, Y. T.,Lowe, T. C. Observations and issues on mechanisms of grain refinement during ECAP process[J]. Materials Science and Engineering A, 2000, 291 (1-2): 46-53.
[47]. Stolyarov, V. V.,Zhu, Y. T.,Lowe, T. C., etc. Microstructure and properties of pure Ti processed by ECAP and cold extrusion[J]. Materials Science and Engineering A, 2001, 303 (1-2): 82-89.
[48]. Lee, S.,Langdon, T. Mater Res Soc Symp Proc[J]. 2000, (601): 359.
[49]. Yamashita, A.,Yamaguchi, D.,Horita, Z., etc. Influence of pressing temperature on microstructural development in equal-channel angular pressing[J]. Materials Science and Engineering A, 2000, 287 (1): 100-106.
[50]. Delo, D. P.,Semiatin, S. L. Metall. Mater. Trans. A 1999, (30): 2473.
[51]. Chen, Y. C.,Huang, Y. Y.,Chang, C. P., etc. The effect of extrusion temperature on the development of deformation microstructures in 5052 aluminium alloy processed by equal channel angular extrusion[J]. Acta Materialia, 2003, 51 (7): 2005-2015.
[52]. Wang, Y. Y.,Sun, P. L.,Kao, P. W., etc. Effect of deformation temperature on the microstructure developed in commercial purity aluminum processed by equal channel angular extrusion[J]. Scripta Materialia, 2004, 50 (5): 613-617.
[53]. Stolyarov, V. V.,Lapovok, R.,Brodova, I. G., etc. Ultrafine-grained Al-5 wt.% Fe alloy processed by ECAP with backpressure[J]. Materials Science and Engineering A, 2003, 357 (1-2): 159-167.
[54]. Raab, G. I.,Soshnikova, E. P.,Valiev, R. Z. Influence of temperature and hydrostatic pressure during equal-channel angular pressing on the microstructure of commercial-purity Ti[J]. Materials Science and Engineering A, 2004, 387-389 674-677.
[55]. Lapovok, R. Y. The positive role of back-pressure in equal channel angular extrusion[J]. Mater Sci Forum, 2006, (503-504): 37-34.
[56]. Krasilnikov, N. A. Russian Metall, 2005, (3): 35.
[57]. Chang, J.-Y.,Yoon, J.-S.,Kim, G.-H. Development of submicron sized grain during cyclic equal channel angular pressing[J]. Scripta Materialia, 2001, 45 (3): 347-354.
[58]. Ferrasse, S.,Segal, V. M.,Ted Hartwig, K., etc. Microstructure and properties of copper and aluminum alloy 3003 heavily worked by equal channel angular extrusion[J]. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1997, 28 (4): 1047-1057.
[59]. Mabuchi, M.,Iwasaki, H.,Yanase, K., etc. Low temperature superplasticity in an AZ91 magnesium alloy processed by ECAE[J]. Scripta Materialia, 1997, 36 (6): 681-686.
[60]. Kim, J.,Kim, I.,Shin, D. H. Development of deformation structures in low carbon steel by equal channel angular pressing[J]. Scripta Materialia, 2001, 45 (4): 421-426.
[61]. Valiev, R. Z.,Langdon, T. G. Principles of equal-channel angular pressing as a processing tool for grain refinement[J]. Progress in Materials Science, 2006, 51 (7): 881-981.
[62]. Beausir, B.,Tóth, L. S.,Neale, K. W. Ideal orientations and persistence characteristics of hexagonal close packed crystals in simple shear[J]. Acta Materialia, 2007, 55 (8): 2695-2705.
[63]. Beyerlein, I. J.,Toth, L. S. Texture evolution in equal-channel angular extrusion[J]. Progress in Materials Science, 2009, 54 (4): 427-510.
[64].陈振华,夏伟军,程永奇, etc.镁合金织构与各向异性[J].中国有色金属学报, 2005, 5 (01): 1-11.
[65]. Beyerlein, I. J.,Lebensohn, R. A.,Tom, C. N. Modeling texture and microstructural evolution in the equal channel angular extrusion process[J]. Materials Science and Engineering A, 2003, 345 (1-2): 122-138.
[66]. Tóth, L. S.,Arruffat Massion, R.,Germain, L., etc. Analysis of texture evolution in equal channel angular extrusion of copper using a new flow field[J]. Acta Materialia, 2004, 52 (7): 1885-1898.
[67]. Ferrasse, S.,Segal, V. M.,Kalidindi, S. R., etc. Texture evolution during equal channel angular extrusion: Part I. Effect of route, number of passes and initial texture[J]. Materials Science and Engineering A, 2004, 368 (1-2): 28-40.
[68]. De Messemaeker, J.,Verlinden, B.,Van Humbeeck, J. Texture of IF steel after equal channel angular pressing (ECAP)[J]. Acta Materialia, 2005, 53 (15): 4245-4257.
[69]. Toth, L. S.,Arruffat Massion, R.,Germain, L., etc. Analysis of texture evolution in equal channel angular extrusion of copper using a new flow field[J]. Acta Materialia, 2004, 52 (7): 1885-1898.
[70]. Yapici, G. G.,Karaman, I. Common trends in texture evolution of ultra-fine-grained hcp materials during equal channel angular extrusion[J]. Materials Science and Engineering: A, 2009, 503 (1-2): 78-81.
[71]. Yapici, G. G.,Karaman, I.,Luo, Z.-P. Mechanical twinning and texture evolution in severely deformed Ti-6Al-4V at high temperatures[J]. Acta Materialia, 2006, 54 (14): 3755-3771.
[72]. Agnew, S. R.,Mehrotra, P.,Lillo, T. M., etc. Crystallographic texture evolution of three wrought magnesium alloys during equal channel angular extrusion[J]. Materials Science and Engineering: A, 2005, 408 (1-2): 72-78.
[73]. Alexandrov, I.,Kilmametov, A. R.,Valiev, R. Z. Russian Metall 2004, (1): 63.
[74]. Rosochowski, A.,Olejnik, L. Finite element simulation of severe plastic deformationprocesses.[J]. Proceedings of the Institution of mechanical engineers, Part L: Jounal of materials: Design and Applications, 2007, 221 (4): 187-196.
[75].林金宝.往复挤压ZK60与GW102K镁合金的组织演变及强韧化机制研究[博士论文][D].上海:上海交通大学2009.
[76]. Prangnell, P. B.,Harris, C.,Roberts, S. M. Finite element modelling of equal channel angular extrusion[J]. Scripta Materialia, 1997, 37 (7): 983-989.
[77]. Bowen, J. R.,Gholinia, A.,Roberts, S. M., etc. Analysis of the billet deformation behaviour in equal channel angular extrusion[J]. Materials Science and Engineering A, 2000, 287 (1): 87-99.
[78]. DeLo, D. P.,Semiatin, S. L. Finite-element modeling of nonisothermal equal-channel angular extrusion[J]. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1999, 30 (5): 1391-1402.
[79]. Semiatin, S. L.,DeLo, D. P.,Shell, E. B. The effect of material properties and tooling design on deformation and fracture during equal channel angular extrusion[J]. Acta Materialia, 2000, 48 (8): 1841-1851.
[80]. Srinivasan, R. Computer simulation of the equichannel angular extrusion (ECAE) process[J]. Scripta Materialia, 2001, 44 (1): 91-96.
[81]. Li, S.,Bourke, M. A. M.,Beyerlein, I. J., etc. Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion[J]. Materials Science and Engineering A, 2004, 382 (1-2): 217-236.
[82]. Kim, H. S. Finite element analysis of deformation behaviour of metals during equal channel multi-angular pressing[J]. Materials Science and Engineering A, 2002, 328 (1-2): 317-323.
[83]. Lee, S. C.,Ha, S. Y.,Kim, K. T., etc. Finite element analysis for deformation behavior of an aluminum alloy composite containing SiC particles and porosities during ECAP[J]. Materials Science and Engineering A, 2004, 371 (1-2): 306-312.
[84]. Pei, Q. X.,Hu, B. H.,Lu, C., etc. A finite element study of the temperature rise during equal channel angular pressing[J]. Scripta Materialia, 2003, 49 (4): 303-308.
[85]. Suo, T.,Li, Y.,Guo, Y., etc. The simulation of deformation distribution during ECAP using 3D finite element method[J]. Materials Science and Engineering: A, 2006, 432 (1-2): 269-274.
[86].余厚毅.钛和钛合金的腐蚀与防腐[J].包装工程, 1986, 15 (03): 1-4.
[87].郭敏,彭乔.钛的应用开发和腐蚀研究[J].四川化工与腐蚀控制, 2000, 3 (6): 28-31.
[88]. Jacobs, J. J.,Gilbert, J. L.,Urban, R. M. Corrosion of metal orthopaedic implants[J]. Journal of Bone and Joint Surgery - Series A, 1998, 80 (2): 268-282.
[89]. Torgersen, S.,Gjerdet, N. R. Retrieval study of stainless steel and titanium miniplates and screws used in maxillofacial surgery[J]. Journal of Materials Science: Materials in Medicine, 1994, 5 (5): 256-262.
[90].魏宝明主编.金属腐蚀理论及应用.第一版.[M].北京:化学工业出版社, 1984.
[91]. Elayaperumal, K.,De, P. K.,Balachandra, J. PASSIVITY OF TYPE 304 STAINLESS STEEL-EFFECT OF PLASTIC DEFORMATION[J]. Corrosion, 1972, 28 (7): 269-273.
[92]. Salvago, G.,Fumagalli, G.,Sinigaglia, D. The corrosion behavior of AISI 304L stainless steel in 0.1 M HCl at room temperature-II. The effect of cold working[J]. Corrosion Science, 1983, 23 (5): 515-523.
[93]. Baranov, D. A.,Lunichkina, M. A.,Nesterova, A. I. The effect of rolling on the corrosion resistance of high-strength cast iron[J]. Zashchita Metallov, 2003, 39 (4): 420-423.
[94]. Baranov, D. A.,Leirikh, I. V.,Myznikova, E. S. Corrosion resistance of strained, high-strength cast iron in aqueous media[J]. Protection of Metals, 2004, 40 (3): 254-256.
[95]. Rofagha, R.,Erb, U.,Ostander, D., etc. Nanostruct Mater, 1993, (2): 12.
[96].郭敏,彭乔.钛的应用与腐蚀[J].全面腐蚀控制, 2000, 14 (02): 20-24,42.
[97]. Uhlig, H. H.,R.W, R. Corrosion and corrosion control[J]. 3rd Edition New York: Wiley-Interscience, 1985.
[98]. Fan, Z.,Jiang, H.,Sun, X., etc. Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation[J]. Materials Science and Engineering: A, In Press, Corrected Proof.
[1].工程材料实用手册编辑委员会.工程材料实用手册:铝合金,镁合金,钛合金[J].中国标准出版社, 1989.
[2]. Guo, X.-W.,Chang, J.-W.,He, S.-M., etc. Investigation of corrosion behaviors of Mg-6Gd-3Y-0.4Zr alloy in NaCl aqueous solutions[J]. Electrochimica Acta, 2007, 52 (7): 2570-2579.
[3]. S.L.Semiatin,V.M.Segal,R.E.Goforth, e. a. Meatll Mater Trans A, 1999, 30 1425-1430.
[4].魏伟.块体超细晶铜的纸板和组织性能研究[博士论文][D].南京:南京理工大学2004.
[5]. Stolyarov, V. V.,Zhu, Y. T.,Lowe, T. C., etc. A two step SPD processing of ultrafine-grainedtitanium[J]. Nanostructured Materials, 1999, 11 (7): 947-954.
[6]. Korshunov, A. I.,Vedernikova, I. I.,Polyakov, L. V., etc. Effects of the number of ECAP passes and ECAP route on the heterogeneity in mechanical properties across the sample from titanium[A]. In Materials Science Forum[C], 2006; 693-698.
[7].范志国.超细晶纯Ti及TiNi合金制备及其组织与力学行为[博士论文][D].上海:上海交通大学2009.
[8]. Fan, Z.,Jiang, H.,Sun, X., etc. Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation[J]. Materials Science and Engineering: A, 2009, 527 (1-2): 45-51.
[9]. Kim, H. S. Evaluation of strain rate during equal-channel angular pressing[J]. Journal of Materials Research, 2002, 17 (1): 172-179.
[10].李树棠.晶体X射线衍射学基础[M].北京:冶金工业出版社, 1990.
[11].毛卫民,张新明.晶体材料织构定量分析[M].北京:冶金工业出版社, 1993.
[12].毛卫民.金属材料的晶体学织构与各向异性[M].北京:科技出版社, 2002.
[13]. R.J.Roe. J.Appl.Phys., 1965, (36): 2024
[14]. H.J.Bunge. Z.Metallkde, 1965, (65): 872.
[15]. Bunge, H. J. Experimental techniques of texture analysis[J]. DGM Information sgesellschaft,Oberursel, 1986.
[16]. Wang, Y. N.,Huang, J. C. Texture analysis in hexagonal materials[J]. Materials Chemistry and Physics, 2003, 81 (1): 11-26.
[17]. J.Imhof. In: Proc.ICOTOM5, 1978, (1): 149.
[18]. D.Ruer,R.Baro. Adv X-Ray Anal, 1977, (20): 187.
[1]. Delo, D. P.,Semiatin, S. L. Finite-element modeling of non-isothermal equal-channel angularextrusion[J]. Metall. Mater. Trans. A, 1990, 30 (5): 1391-1402.
[2]. Zuyan, L.,Gang, L.,Wang, Z. R. Finite element simulation of a new deformation type occurring in changing-channel extrusion[J]. Journal of Materials Processing Technology, 2000, 102 (1-3): 30-32.
[3]. Semiatin, S. L.,DeLo, D. P.,Shell, E. B. The effect of material properties and tooling design on deformation and fracture during equal channel angular extrusion[J]. Acta Materialia, 2000, 48 (8): 1841-1851.
[4]. A.V., N. Int. J. Nanosci., 2005, (4): 745-751.
[5]. Yang, F.,Saran, A.,Okazaki, K. Finite element simulation of equal channel angular extrusion[J]. Journal of Materials Processing Technology, 2005, 166 (1): 71-78.
[6]. Bowen, J. R.,Gholinia, A.,Roberts, S. M., etc. Analysis of the billet deformation behaviour in equal channel angular extrusion[J]. Materials Science and Engineering A, 2000, 287 (1): 87-99.
[7]. Kim, H. S.,Seo, M. H.,Hong, S. I. On the die corner gap formation in equal channel angular pressing[J]. Materials Science and Engineering A, 2000, 291 (1-2): 86-90.
[8]. J.H., L.,I.h., S.,Y.T., I. Mater.Trans., 2004, (45): 2165-2171.
[9]. Dumoulin, S.,Roven, H. J.,Werenskiold, J. C., etc. Finite element modeling of equal channel angular pressing: Effect of material properties, friction and die geometry[J]. Materials Science and Engineering: A, 2005, 410-411 248-251.
[10]. Prangnell, P. B.,Harris, C.,Roberts, S. M. Finite element modelling of equal channel angular extrusion[J]. Scripta Materialia, 1997, 37 (7): 983-989.
[11]. Kim, H. S. Finite element analysis of deformation behaviour of metals during equal channel multi-angular pressing[J]. Materials Science and Engineering A, 2002, 328 (1-2): 317-323.
[12]. Stolyarov, V. V.,Zhu, Y. T.,Alexandrov, I. V., etc. Influence of ECAP routes on the microstructure and properties of pure Ti[J]. Materials Science and Engineering A, 2001, 299 (1-2): 59-67.
[13].单德彬,吕炎,王真.金属体积成形过程三维刚塑性有限元模拟技术的研究[J].塑性工程学报, 1997, (03).
[14].毕大森,张建,崔宏祥, etc.等通道转角挤压模具挤压力计算[J].重型机械, 2001, (06): 34-36.
[15].王立忠,安静,王经涛, etc.低碳钢等径弯曲通道变形数值模拟及组织分析[J].西安交通大学学报, 2004, (03): 226-229.
[16].毕见强. 2A12铝块体超细晶材料的制备、模拟及细化机制的研究[博士论文][D].山东:山东大学2005.
[17]. J.W., P.,J.Y., S. Metall. Mater. Trans. A, 2001, (32): 3007-3014.
[18]. Yang, Y.-L.,Lee, S. Finite element analysis of strain conditions after equal channel angular extrusion[J]. Journal of Materials Processing Technology, 2003, 140 (1-3): 583-587.
[19]. Iwahashi, Y.,Wang, J.,Horita, Z., etc. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials[J]. Scripta Materialia, 1996, 35 (2): 143-146.
[20]. Figueiredo, R. B.,Cetlin, P. R.,Langdon, T. G. The processing of difficult-to-work alloys by ECAP with an emphasis on magnesium alloys[J]. Acta Materialia, 2007, 55 (14): 4769-4779.
[21]. Cockcroft, M. G.,Latham, D. J. National Engineer Laboratory. Glasgow, UK,, 1966.
[22]. Oh, S. I.,Chen, C. C.,obayashi, S. K. J. Eng. Ind., 1979, (101): 36-44.
[23]. Semiatin, S. L.,Segal, V. M.,Goforth, R. E., etc. Workability of commercial-purity titanium and 4340 steel during equal channel angular extrusion at cold-working temperatures[J]. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1999, 30 (5): 1425-1435.
[24]. Park, J. W.,Suh, J. Y. Metall. Mater. Trans. A, 2001, (32): 3007-3014.
[25]. Shin, D. H.,Pak, J.-J.,Kim, Y. K., etc. Effect of pressing temperature on microstructure and tensile behavior of low carbon steels processed by equal channel angular pressing[J]. Materials Science and Engineering A, 2002, 323 (1-2): 409-415.
[26]. Huang, W. H.,Yu, C. Y.,Kao, P. W., etc. The effect of strain path and temperature on the microstructure developed in copper processed by ECAE[J]. Materials Science and Engineering A, 2004, 366 (2): 221-228.
[27]. M醠 ek, P.,Cieslar, M.,Islamgaliev, R. K. The influence of ECAP temperature on the stability of Al-Zn-Mg-Cu alloy[J]. Journal of Alloys and Compounds, 2004, 378 (1-2): 237-241.
[28]. Goloborodko, A.,Sitdikov, O.,Kaibyshev, R., etc. Effect of pressing temperature on fine-grained structure formation in 7475 aluminum alloy during ECAP[J]. Materials Science and Engineering A, 2004, 381 (1-2): 121-128.
[29]. Fagin, P. N.,Brown, J. O.,Brown, T. M., etc. Failure modes during equal channel angular extrusion of aluminum alloy 2024[J]. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2001, 32 (7): 1869-1870.
[30]. Wang, Y. Y.,Sun, P. L.,Kao, P. W., etc. Effect of deformation temperature on the microstructure developed in commercial purity aluminum processed by equal channel angular extrusion[J]. Scripta Materialia, 2004, 50 (5): 613-617.
[31]. Yamaguchi, D.,Horita, Z.,Nemoto, M., etc. Significance of adiabatic heating in equal-channel angular pressing[J]. Scripta Materialia, 1999, 41 (8): 791-796.
[32]. Nishida, Y.,Ando, T.,Nagase, M., etc. Billet temperature rise during equal-channel angular pressing[J]. Scripta Materialia, 2002, 46 (3): 211-216.
[33]. Semiatin, S. L.,Berbon, P. B.,Langdon, T. G. Deformation heating and its effect on grain size evolution during equal channel angular extrusion[J]. Scripta Materialia, 2001, 44 (1): 135-140.
[34]. Deform reference manual[M].
[35].林金宝.往复挤压ZK60与GW102K镁合金的组织演变及强韧化机制研究[博士论文][D].上海:上海交通大学2009.
[36]. Pei, Q. X.,Hu, B. H.,Lu, C., etc. A finite element study of the temperature rise during equal channel angular pressing[J]. Scripta Materialia, 2003, 49 (4): 303-308.
[37]. Kim, H. S. Analysis of thermal behavior during equal channel multi-angular pressing by the 3-dimensional finite volume method[J]. Materials Science and Engineering: A, 2009, 503 (1-2): 130-136.
[38]. Kim, I.,Kim, J.,Shin, D. H., etc. Effects of equal channel angular pressing temperature on deformation structures of pure Ti[J]. Materials Science and Engineering A, 2003, 342 (1-2): 302-310.
[39]. Iwahashi, Y.,Horita, Z.,Nemoto, M., etc. The process of grain refinement in equal-channel angular pressing[J]. Acta Materialia, 1998, 46 (9): 3317-3331.
[40]. Shin, D. H.,Kim, I.,Kim, J., etc. Grain refinement mechanism during equal-channel angular pressing of a low-carbon steel[J]. Acta Materialia, 2001, 49 (7): 1285-1292.
[41]. Furukawa, M.,Fukuda, Y.,Oh-Ishi, K., etc. An investigation of deformation in aluminum single crystals using equal-channel angular pressing[A]. In Chandra, T.,Torralba, J. M.,Sakai, T., Materials Science Forum[C], 2003; 2711-2716.
[42].范志国.超细晶纯Ti及TiNi合金制备及其组织与力学行为[博士论文][D].上海:上海交通大学2009.
[1]. Furukawa, M.,Iwahashi, Y.,Horita, Z., etc. The shearing characteristics associated withequal-channel angular pressing[J]. Materials Science and Engineering: A, 1998, 257 (2): 328-332.
[2]. Iwahashi, Y.,Horita, Z.,Nemoto, M., etc. An investigation of microstructural evolution during equal-channel angular pressing[J]. Acta Materialia, 1997, 45 (11): 4733-4741.
[3]. Beyerlein, I. J.,Field, R. D.,Hartwig, K. T., etc. Texture development in two-pass ECAE-processed beryllium[J]. Journal of Materials Science, 2008, 43 (23-24): 7465-7473.
[4]. Beyerlein, I. J.,Toth, L. S. Texture evolution in equal-channel angular extrusion[J]. Progress in Materials Science, 2009, 54 (4): 427-510.
[5]. Isaenkova, M.,Y, P.,V, F., etc. Formation of inhomogeneous texture and structure in metal materials under equal-channel angular pressing[J]. Mater Sci Forum (ICOTOM-14), 2005, 495–497 6.
[6]. Shin, D. H.,Kim, I.,Kim, J., etc. Microstructure development during equal-channel angular pressing of titanium[J]. Acta Materialia, 2003, 51 (4): 983-996.
[7]. Balasubramanian, S.,Anand, L. Plasticity of initially textured hexagonal polycrystals at high homologous temperatures: application to titanium[J]. Acta Materialia, 2002, 50 (1): 133-148.
[8]. Liu, T.,Wang, Y. D.,Wu, S. D., etc. Textures and mechanical behavior of Mg-3.3%Li alloy after ECAP[J]. Scripta Materialia, 2004, 51 (11): 1057-1061.
[9]. Kim, W. J.,Chung, S. W.,Chung, C. S., etc. Superplasticity in thin magnesium alloy sheets and deformation mechanism maps for magnesium alloys at elevated temperatures[J]. Acta Materialia, 2001, 49 (16): 3337-3345.
[10].毛卫民,张新明.晶体材料织构定量分析[M].北京:冶金工业出版社, 1993.
[11].毛卫民,杨平,陈冷.材料织构分析原理与检测技术[M].北京:冶金工业出版社, 2008.
[12].李树棠. X射线衍射实验方法[J].北京:冶金工业出版社, 1993, 82.
[13].洪波.电沉积铜薄膜中织构与内应力的研究[博士论文][D].上海:上海交通大学2008.
[14].梁志德,徐家桢,王福.织构材料的三维取向分析术-ODF分析[M].沈阳:东北工学院出版社, 1986.
[15]. Wang, Y. N.,Huang, J. C. Texture analysis in hexagonal materials[J]. Materials Chemistry and Physics, 2003, 81 (1): 11-26.
[16]. Bunge, H. J. Texture analysis in materials science[M]. London: Butterworth, 1982.
[17]. Alexander, D.,Vogel, S.,Li, S., etc. Unpublished data from Los Alamos National Laboratory[J]. 2004.
[18]. Li, S.,Alexander, D.,Beyerlein, I., etc. Texture evolution during multi-pass equal channel angular extrusion of beryllium[J]. Proceedings of ICOTOM-15, 2008 [CD-ROM].
[19]. Kim, W. J.,Hong, S. I.,Kim, Y. S., etc. Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing[J]. Acta Materialia, 2003, 51 (11): 3293-3307.
[20]. DeLo, D.,TR, B.,SL, S. Microstructure and texture evolution during equal channel angular extrusion of Ti-6Al-4V[J]. 2000, March 12-16 10.
[21].肖林.密排六方金属的塑性变形[J].稀有金属材料与工程, 1995, (06).
[22]. PG, P. The crystallography and deformation modes of hcp metals[J]. Metall Rev 1967, (12): 169-194.
[23]. Yoo, M.,Wei, C. Slip modes of hexagonal-close-packed metals[J]. Philos Mag, 1966, (14): 573-587.
[24]. Paton, N.,Backofen, W. Metall. Trans., 1970, (1): 2839.
[25]. Minonishi, Y.,Morozumi, S.,Yoshinaga, H. Scripta metall, 1982, (16): 427.
[26]. Akhtar, A. Metall. Trans, 1975, (A6): 1105.
[27]. Numakura, H.,Koiwa, M. Metall. Sci. Technol, 1998, (16): 4.
[28].崔忠圻.金属学与热处理(铸造、焊接专业用)[M].北京:机械工业出版社, 1995.
[29].胡庚祥,蔡询.材料科学基础[M].上海:上海交通大学出版社, 2000.
[30].杨平.电子背散射衍射技术及其应用[M].北京:冶金工业出版社, 2007.
[31].毛卫民.金属材料的晶体学织构与各向异性[M].北京:科技出版社, 2002.
[32].张信钰.金属和合金的织构[M].北京:科学出版社, 1976.
[33]. De Messemaeker, J.,Verlinden, B.,Van Humbeeck, J. Texture of IF steel after equal channel angular pressing (ECAP)[J]. Acta Materialia, 2005, 53 (15): 4245-4257.
[34]. Fundenberger, J. J.,Philippe, M. J.,Wagner, F., etc. Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys)[J]. Acta Materialia, 1997, 45 (10): 4041-4055.
[35]. Paton, N.,Backofen, W. Metall Trans[J]. 1970, (1): 2839.
[36]. Paton, N.,Backofen, W. Trans TMS-AMIE 1969, (245): 1369.
[37]. Kim, I.,Kim, J.,Shin, D. H., etc. Deformation twins in pure titanium processed by equal channel angular pressing[J]. Scripta Materialia, 2003, 48 (6): 813-817.
[38]. Fan, Z.,Jiang, H.,Sun, X., etc. Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation[J]. Materials Science and Engineering: A, In Press, Corrected Proof.
[39].陈振华,夏伟军,程永奇, etc.镁合金织构与各向异性[J].中国有色金属学报, 2005, 5 (01):1-11.
[40]. Wang, Y. M.,Ma, E.,Chen, M. W. Enhanced tensile ductility and toughness in nanostructured Cu[J]. Applied Physics Letters, 2002, 80 (13): 2395.
[41]. Ko, Y. G.,Shin, D. H.,Park, K.-T., etc. An analysis of the strain hardening behavior of ultra-fine grain pure titanium[J]. Scripta Materialia, 2006, 54 (10): 1785-1789.
[1]. Adamescu, R. A.,Bratchikov, D. A.,Geld, P. V., etc. Texture of Materails. In Gottstein, G.,Luc, K., Eds. 1978; Vol. 2, 4031.
[2]. Inagaki, H. Texture and mechanical anisotropy in cold rolled and annealed pure Ti sheets[J].Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1992, 83 (1): 40-46.
[3].朱知寿,顾家琳,陈南平.冷轧形变量对钛板材再结晶织构形成的影响[J].材料科学与工艺, 1995, (02).
[4]. Tchorzewski, R. M.,Hutchinson, W. B. 1972, 2 109-112.
[5].朱知寿,顾家琳,陈南平.钛的织构控制方法与力学性能各向异性的研究[J].机械工程材料, 1994, (06).
[6].朱知寿,颜鸣皋,顾家琳,陈南平.钛的相变织构及其影响因素研究[J].航空材料学报, 1996, (01).
[7]. Wang, Y. M.,Ma, E.,Valiev, R. Z. Adv Mater, 2004, 16 (4): 328-331.
[8]. Wang, Y. N.,Huang, J. C. Texture analysis in hexagonal materials[J]. Materials Chemistry and Physics, 2003, 81 (1): 11-26.
[9].范志国.超细晶纯Ti及TiNi合金制备及其组织与力学行为[博士论文][D].上海:上海交通大学2009.
[10].靳丽.等通道角挤压(ECAE)变形镁合金微观组织与力学性能研究[博士论文][D].上海:上海交通大学2006.
[11]. Honeycombe, R. The plastic deformation of Metals[J]. Edward Amold(Australia) Pty Ltd, 1984, 45.
[1].秦莹,王少安.钛及钛合金口腔种植体的腐蚀性能研究[J].国际口腔医学杂志, 2008, 35 (4): 255-258.
[2].黄永光.外科植入用钛合金材料及其标准化[J].钛工业进展, 2002, (01).
[3].陈长春,孙.吴.髋关节置换用股骨假体材料的研究与应用[J].材料导报, 1998, (06).
[4]. Stolyarov, V. V.,Zhu, Y. T.,Alexandrov, I. V., etc. Influence of ECAP routes on the microstructure and properties of pure Ti[J]. Materials Science and Engineering A, 2001, 299 (1-2): 59-67.
[5]. Stolyarov, V. V.,Zhu, Y. T.,Alexandrov, I. V., etc. Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling[J]. Materials Science and Engineering A, 2003, 343 (1-2):43-50.
[6]. Garbacz, H.,Pisarek, M.,Kurzydlowski, K. J. Corrosion resistance of nanostructured titanium[J]. Biomolecular Engineering, 2007, 24 (5): 559-563.
[7]. Faghihi, S.,Azari, F.,Zhilyaev, A. P., etc. Cellular and molecular interactions between MC3T3-E1 pre-osteoblasts and nanostructured titanium produced by high-pressure torsion[J]. Biomaterials, 2007, 28 (27): 3887-3895.
[8]. Elayaperumal, K.,De, P. K.,Balachandra, J. PASSIVITY OF TYPE 304 STAINLESS STEEL-EFFECT OF PLASTIC DEFORMATION[J]. Corrosion, 1972, 28 (7): 269-273.
[9]. Salvago, G.,Fumagalli, G.,Sinigaglia, D. The corrosion behavior of AISI 304L stainless steel in 0.1 M HCl at room temperature-II. The effect of cold working[J]. Corrosion Science, 1983, 23 (5): 515-523.
[10]. Baranov, D. A.,Lunichkina, M. A.,Nesterova, A. I. The effect of rolling on the corrosion resistance of high-strength cast iron[J]. Zashchita Metallov, 2003, 39 (4): 420-423.
[11]. Baranov, D. A.,Leirikh, I. V.,Myznikova, E. S. Corrosion resistance of strained, high-strength cast iron in aqueous media[J]. Protection of Metals, 2004, 40 (3): 254-256.
[12]. Rofagha, R.,Erb, U.,Ostander, D., etc. Nanostruct Mater, 1993, (2): 12.
[13]. Vinogradov, A.,Mimaki, T.,Hashimoto, S., etc. On the corrosion behaviour of ultra-fine grain copper[J]. Scripta Materialia, 1999, 41 (3): 319-326.
[14]. Chung, M.-K.,Choi, Y.-S.,Kim, J.-G., etc. Effect of the number of ECAP pass time on the electrochemical properties of 1050 Al alloys[J]. Materials Science and Engineering A, 2004, 366 (2): 282-291.
[15]. Balyanov, A.,Kutnyakova, J.,Amirkhanova, N. A., etc. Corrosion resistance of ultra fine-grained Ti[J]. Scripta Materialia, 2004, 51 (3): 225-229.
[16]. Hoseini, M.,Shahryari, A.,Omanovic, S., etc. Comparative effect of grain size and texture on the corrosion behaviour of commercially pure titanium processed by equal channel angular pressing[J]. Corrosion Science, 2009, 51 (12): 3064-3067.
[17].王革,程祥荣.阳极氧化对纯钛氧化膜影响的电化学腐蚀研究[J].中华口腔医学杂志, 2002, (01).
[18].Geis Gerstorfer, J. In vitro corrosion measurements of dental alloys[J]. Journal of Dentistry, 1994, 22 (4): 247-251.
[19].郭文渊.亚稳β型Ti-Nb-Ta-Zr-O合金的显微组织与性能[博士论文][D].上海:上海交通大学2008.
[20].裘松波,曹风华,孙占波.动电位极化技术在口腔修复材料腐蚀测定中的应用[J].第三军医大学学报, 2001, (02).
[21].刘永辉,张佩芬.金属腐蚀学原理[M].北京:航空工业出版社, 1993; 88-89,230
[22]. Salimi, A.,Roushani, M.,Hallaj, R. Micromolar determination of sulfur oxoanions and sulfide at a renewable sol-gel carbon ceramic electrode modified with nickel powder[J]. Electrochimica Acta, 2006, 51 (10): 1952-1959.
[23].常建卫. Mg-Nd-Zn-Zr稀土镁合金腐蚀行为的研究[博士论文][D].上海:上海交通大学2007.
[24].曹楚南.腐蚀电化学原理[M].北京:化学工业出版社, 2008.
[25].曹楚南,张鉴清.电化学阻抗谱导论[M].北京:科技出版社, 2002.
[26].崔宝玉,张振邦,火时中.钛电极交流阻抗谱的弥散效应[J].腐蚀科学与防护技术, 1994, (02).
[27]. Jones, D. Principals and prevention of corrosion. 2nd ed. [M]. Upper Saddle River, NJ, US: Prentice-Hall, Inc., 1992.
[28]. Movchan, B. Jakupolska LN. Prot Met 1969, (5): 511.
[29]. Johansen, N.,Adams, G.,Rysselberghe, P. V. J Electrochem Soc, 1957, (104): 339.
[30]. Scully, J. C. The Fundamentals of Corrosion 3rd edition[M]. New York: Pergamon Pr, 1990.
[31]. Bockris, J.,Khan, S. Surface Electrochemistry: A Molecular Level Approach[M]. New York: Plenum Press, 1993.