川中地区中三叠统复杂构造地震资料采集处理技术效果评价
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
川中地区中三叠统雷口坡组地层在其内部和下伏嘉陵江组的盐岩、膏岩等软地层的盐底辟作用以及区域 上的挤压作用共同影响下,形成了以坡坪式逆冲断层为主,密集的低幅度断弯褶皱相伴生的薄皮逆冲构造样式, 使得该区多个区块的地震资料构造成像质量不理想。雷一1亚段的白云岩层段与其上下围岩的波阻抗差较小, 地震反射表现为弱反射特征,雷一1顶面反射品质较差,反射层位难以准确识别,构造解释的难度很大。为此,在 3个不同区块内,对雷一1反射的目标处理结果及相应的采集参数进行了包括不同采集参数的二维新、老资料, 三维叠前、叠后偏移处理等在内的对比分析。结果表明,应根据雷口坡组地层的构造特征选择采集和处理技术, 即当构造形态呈密集的低幅度强烈褶皱和断裂时,必须采用三维地震勘探及叠前偏移等技术;当构造较简单时, 采用二维常规采集处理技术,即可获得较高品质的资料。
The structure styles of Middle Triassic Leikoupo formation, in central Sichuan basin, are roof slip contraction structure, which primarily is a ramp-flat thrust accompanied by close fault-bend fold with low highness. The structure styles are formed by conjunct action of regional compression and salt diaper that is caused by soft salt and gypsum within Leikoupo formation and underlying Jialingjiang formation. Analysis the processing results and corresponding field geometries for Lei11 reflection at three different blocks, including 2-D old and new data with different acquisition parameters, and 3-D data with prestack and poststack migration. We suggest that it is imperative to select suitable acquisition and processing techniques for structure characteristic of Leikoupo formation. It must take 3-D seismic exploration and prestack migration when structure is consists dense folds with low highness, it is enough to take 2-D normal seismic acquisition and processing techniques when the structure is relative simple.
引文
1王翠华.折射静校应用研究[J].石油物探,2000,39 (4):107~113
    2贾丽华,吴长江,罗焱鑫,等.地震资料高分辨率处理技 术[J].石油物探,2002,41(4):484-488
    3 Tselentis G A, Paraskevopoulos P. Application of a high-resolution seismic investigation in a Greek coal mine[J]. Geophysics, 2002,67(1) :50-59
    4李福中,邢国栋,白旭明,等.初至波层析静校正方法研 究[J].石油地球物理勘探,2000,35(6):710-718
    5张永刚.地震波场数值模拟方法[J].石油物探,2003, 42(2):143~148
    6漆家福.油区构造解析[M].北京:石油大学出版社, 2001.6~7,10~11,160~184
    7布朗A R.三维地震资料解释[M].北京:石油工业出版 社,1996.1~73

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心