一种地震数据多串口采集方法
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
地震监测系统常常使用串口异步通讯监测数据、传输命令,但由于核心器件所带的串口数量不足,通常需要扩展串口。提出以TL16C754B为核心器件的多串口数据采集方法,包括具体的系统电路的设计方法和部分驱动的编程源代码。由于该设计具有成本低、稳定性高、低耗、抗干扰能力强、电路简单等优点,已被成功地运用于微动台阵观测仪器中。
Universal Asynchronous Receiver Transmitter(UART) is widely used in earthquake monitoring system to monitor data and transmit command.Because of the insufficient quantity of serial ports of some core devices,multiple extended serial ports are needed.A method based on TL16C754B to expand multiple serial ports is proposed and the design of systems circuit and source code are put forward.This design has several advantrages: low cost,high steady,low power,anti-interference ability,compact circuit,etc.so is successfully used in microtremor observation system.
引文
1 Texas Instruments.Tl16C754B QUAD UART WITH 64-BYTE FIFO[M].Texas:Texas Instruments,1999.
    2陈德胜,等.Tl16c754在嵌入式系统串行通信中的应用[J].仪器仪表用户,2007,14(4):81-82.
    3马忠梅.单片机的C语言应用程序设计[M].北京:北京航空航天大学出版社,2006.
    4周奋,王婷.嵌入式系统中串口通信帧的同步方法[J].单片机及嵌入式系统应用,2006,10:73-75.
    5刘小芳,曾黄麟,吕炳朝.单片机的多串口扩展技术的设计[J].计算机测量与控制,2004,12(11):1 088.
    6廖成旺,等.微动观测台阵定位方式研究[J].大地测量与地球动力学,2007,27(6):61-64.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心