安庆铜矿深部开采稳定性研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
在参考大量资料的基础上,针对安庆铜矿深部大直径深孔法开采的稳定性进行研究.经计算分析,认为安庆铜矿深部典型矿岩具有弱~中等程度的岩爆倾向性.运用块体理论分析结构面产状对深部开采稳定性的影响;通过对工程岩体的评价,认为安庆铜矿深部岩体质量级别为Ⅲ级.通过数值模拟得出合理的开采顺序;为减小爆破振动提出合理的爆破方式.
This paper researches the stability of the anqing copper mine deep mining on the base of large data. The paper considers it has the feeble or middle rockbursts proneness of anqing copper mine by computing and analyzing.The paper analyses the deep exploitation stability that discontinuities form impacts on by the block theory;it isⅢrock-grade through the engineering rock masses evaluation.The paper gets a reasonable mining sequence by the numerical simulation and a reasonable blasting method in order to reduce the blasting vibrancy.
引文
[1]袁世伦.强化开采在安庆铜矿的应用[J].有色矿山.2002.31(5):14~17.
    [2]李周经.安庆铜矿高阶段大直径深孔采矿法实施方案[J].中国矿业,1993,2(5):27~31.
    [3]董诚,王连捷,杨小聪,等.安庆铜矿地应力测量[J].地质工程力学学报,2001,7(3):259~264.
    [4]唐绍辉.安庆铜矿岩体稳定性的工程地质研究[J].矿业研究与开发,1997,17(1):30~33.
    [5]胡萌.安庆铜矿高阶段大直径深孔爆破地震效应的浅析[J].铜业工程,2003,(3):10~12.
    [6]孙再东.刘志祥.矿柱高阶段大直径深孔回采边孔爆破参数试验研究[J].矿业研究与开发,1997,17(3)28~32.
    [7]李政,卫明.光面爆破在高阶段大直径深孔采矿中的应用[J].有色矿冶,1998,7(3):19~20.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心