输电塔-大垂度电缆体系的地震反应上限
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
本文将输电塔-大垂度电缆体系的计算简图近似为折线形杆链体系,在刚度特性不确知的情况下,可利用“最不利可能变形状态”替代振型,并做极限计算,从而确定出地震反应的上限。
Under the action of earthquake, the large span transmission lines with supporting towers is a complicated system of spatial coupling vibration. It is necessary to determine the reasonable computation scheme of this system for engineering design.The conventional methods will never be valid to calculate the seismic responses of the large span transmission lines and their supporting towers under the condition of unknown rigidity distribution. In this paper, an approach with noverl idea is presented.The upper bound seismic responses can be determined by putting the product function specially defined in this paper in extrema. Only two modes which have contributions to the responses need to be considered in design. as all the other high modes have strictly no contributions.In thd paper, the mechanical model of tower-line coupling vibrstion is given in X-Y plane. We compare the unknown rigidity distribution with known rigidity distribution in 2-degrees-of-freedom(DOF). We find the upper bound seismic loads in unknown rigidity distribution are always greater than the seismic loads in known rigidity distribution.
引文
[1]WangQianxin,LiuChunguang,SeismicLoadsonSupportingFramesofGasPipelines,ASMEPVP,Nashville,U.S.A,1990.[2]王前信,陆鸣,李宏男,输电塔-电缆体系的合理抗震计算简图,地震工程与工程振动,第9卷,第3期,1989.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心