型钢混凝土框架静力非线性分析塑性铰参数研究
|
摘要
SRC构件具有比普通RC构件更高的承载力和极限变形能力.但由于SRC构件塑性铰属性参数较难确定,使该结构很难直接应用静力非线性方法进行分析,而是转化为等刚度的RC构件进行计算.从理论上给出了SRC框架压弯构件PMM铰N-Mx-My相关面的形成方法,提出了型钢混凝土构件弯矩-曲率曲线的确定及将其转化为杆单元塑性铰弯矩-曲率关系的方法,并得到了塑性铰区长度的计算方法.应用确定的铰属性参数对两跨三层SRC框架进行了静力非线性分析,结果与振动台试验吻合较好,表明这种铰属性参数用于SRC构件静力非线性分析是合适的.最后通过与具有相同刚度的RC框架计算结果对比分析,表明采用这种刚度相等的RC构件进行计算低估了SRC框架的抗震能力.
Steel reinforced concrete(SRC)structures have lots of advantages over reinforced concrete(RC) structures in strength and ultimate deflection capacity.Because there are some problems on the determination of plastic hinge property for SRC members,it is difficult to carry out nonlinear static analysis directly to this structure,which is usually substituted by reinforced concrete member with equal rigidity when Pushover analysis is needed.This paper presents the computing methods of N-Mx-My interaction surface of SRC members PMM plastic hinges theoretically,gives the determination means of curve of SRC member,puts forward the principle to form curve of PMM hinge transformed from that of SRC member,and provides the calculation formula of plastic hinge length.According to the proposed method,Pushover analysis is performed on a SRC frame with two bays and three stories,of which the results are in good agreement with that of the test.This indicates that the plastic hinge property defined in the paper is proper,and may be referenced for SRC structure nonlinear static analysis.Finally, a comparative study is carried out between SRC frame and RC frame with equal rigidity,which demonstrates that seismic behavior of the SRC structure will be underestimated when it is substituted by the RC structure with equal rigidity.
Steel reinforced concrete(SRC)structures have lots of advantages over reinforced concrete(RC) structures in strength and ultimate deflection capacity.Because there are some problems on the determination of plastic hinge property for SRC members,it is difficult to carry out nonlinear static analysis directly to this structure,which is usually substituted by reinforced concrete member with equal rigidity when Pushover analysis is needed.This paper presents the computing methods of N-Mx-My interaction surface of SRC members PMM plastic hinges theoretically,gives the determination means of curve of SRC member,puts forward the principle to form curve of PMM hinge transformed from that of SRC member,and provides the calculation formula of plastic hinge length.According to the proposed method,Pushover analysis is performed on a SRC frame with two bays and three stories,of which the results are in good agreement with that of the test.This indicates that the plastic hinge property defined in the paper is proper,and may be referenced for SRC structure nonlinear static analysis.Finally, a comparative study is carried out between SRC frame and RC frame with equal rigidity,which demonstrates that seismic behavior of the SRC structure will be underestimated when it is substituted by the RC structure with equal rigidity.
引文
[1]薛建阳,赵鸿铁.型钢混凝土框架弹塑性地震反应实验研究[J].西安建筑科技大学学报:自然科学版,1997,29(4):360-363.XUE Jian-yang,ZHAO Hong-tie.Experi ment on the elastoplastic seismic Responses for Steel Reinforced ConcreteFrame[J].J.of Xi an Univ.of Arch.&Tech.(Natural Science Edifion),1997,29(4):360-363.
[2]白国良,楚留声,李晓文.高层框架-核心筒结构抗震防线问题研究[J].西安建筑科技大学学报:自然科学版,2007,39(4):445-450.BAI Guo-liang,CHU Liu-sheng,LI Xiao-wen.The research on the problemof earthquake fortificationlinein high-riseframe-core wall stractures[J].J.of Xi an Univ.of Arch.&Tech.(Natural Science Edition),2007,39(4):445-450.
[3]北京金土木软件技术有限公司等.SAP2000中文版使用指南[M].北京:人民交通出版社,2006.BEIJING Civil Engineering Software Technology Corporation.SAP2000 Chinese version of the Guide[M].,Beijing:China Communication Press,2006.
[4]J.L.Bonet et al.Comparative study of analytical and numerical algorithms for designing reinforced concrete sec-tions under biaxial bending[J].Computers and Structures,2006,84:2184-2193.
[5]C.Dundar et al.Behaviour of reinforced and concrete-encased composite columns subjected to biaxial bending andaxial load[J].Building and Environment February,2007:1-7.
[6]JGJ 138-2002,型钢混凝土组合结构技术规程[S].北京:中国建筑工业出版社,2002.JGJ138-2002,Technical specification for steel reinforced concrete composite structures[S].Beijing:China Archi-tecture and Building Press,2002.
[7]张兴武.建筑结构设计新法及应用[M].北京:中国建筑工业出版社,2006.ZHANG Xing-wu.The new design means and application of building structures[M].Beijing:China Architectureand Building Press,2006.
[8]颜卫亨,张兴武.运用承载力相关曲线族规律计算组合构件的方法[J].建筑结构,2003,33(7):43-45.YAN Wei-heng,ZHANG Xing-wu.Method of Using the Bearing Capacity Interactive Group of Curves to Calculat-ing Compound Structure[J].Building structures,2003,33(7):43-45.
[9]过镇海.钢筋混凝土原理[M].北京:清华大学出版社,2006.GUO Zhen-hai.Reinforced concrete principles[M].Beijing:Tsinghua University Press,2006.
[10]马永欣,郑山锁.结构实验[M].北京:科学出版社,2001.MA Yong-xin,ZHENG Shan-suo.Structure tests[M].Beijing:Science Press,2001.
[2]白国良,楚留声,李晓文.高层框架-核心筒结构抗震防线问题研究[J].西安建筑科技大学学报:自然科学版,2007,39(4):445-450.BAI Guo-liang,CHU Liu-sheng,LI Xiao-wen.The research on the problemof earthquake fortificationlinein high-riseframe-core wall stractures[J].J.of Xi an Univ.of Arch.&Tech.(Natural Science Edition),2007,39(4):445-450.
[3]北京金土木软件技术有限公司等.SAP2000中文版使用指南[M].北京:人民交通出版社,2006.BEIJING Civil Engineering Software Technology Corporation.SAP2000 Chinese version of the Guide[M].,Beijing:China Communication Press,2006.
[4]J.L.Bonet et al.Comparative study of analytical and numerical algorithms for designing reinforced concrete sec-tions under biaxial bending[J].Computers and Structures,2006,84:2184-2193.
[5]C.Dundar et al.Behaviour of reinforced and concrete-encased composite columns subjected to biaxial bending andaxial load[J].Building and Environment February,2007:1-7.
[6]JGJ 138-2002,型钢混凝土组合结构技术规程[S].北京:中国建筑工业出版社,2002.JGJ138-2002,Technical specification for steel reinforced concrete composite structures[S].Beijing:China Archi-tecture and Building Press,2002.
[7]张兴武.建筑结构设计新法及应用[M].北京:中国建筑工业出版社,2006.ZHANG Xing-wu.The new design means and application of building structures[M].Beijing:China Architectureand Building Press,2006.
[8]颜卫亨,张兴武.运用承载力相关曲线族规律计算组合构件的方法[J].建筑结构,2003,33(7):43-45.YAN Wei-heng,ZHANG Xing-wu.Method of Using the Bearing Capacity Interactive Group of Curves to Calculat-ing Compound Structure[J].Building structures,2003,33(7):43-45.
[9]过镇海.钢筋混凝土原理[M].北京:清华大学出版社,2006.GUO Zhen-hai.Reinforced concrete principles[M].Beijing:Tsinghua University Press,2006.
[10]马永欣,郑山锁.结构实验[M].北京:科学出版社,2001.MA Yong-xin,ZHENG Shan-suo.Structure tests[M].Beijing:Science Press,2001.
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心