引文
[1]Comite European de Normalisation(CEN),Eurocode4:De-sign of composite steel and concrete structures,Part1.1:General rules and rules for buildings[J],ENV1994-1-1,Brussels:CEN,1993.
[2]孙飞飞,李国强,梁柱组合节点的试验研究新进展[J],建筑钢结构进展,2004,6(2):37-42.
[3]J.M.Cabrero,E.Bayo,胡大柱,半刚性连接钢结构实用设计方法的发展,建筑钢结构进展,2005,7(4),63-63.
[4]肖勇,组合节点和框架的分析与设计[J],建筑钢结构进展,2002,(3):13-19.
[5]Zandonini R.Semi-rigid composite joints.In:Narayanan R,editor.Structural Connections:Stability and Strength[M].London:Elsevier Applied Science,1989:63-120.
[6]L.Si moes da Silva,Rui D.Si moes,Paulo J.S.Cruz:Experi-mental behaviour of end-plate beam-to-column composite joints under monotonical loading[J],Engineering Structures,2001,23:1383-1409.
[7]C.Faella,one-di mension finite approach for the analysis of steel-concrete frames[C],First International Conference on Steel&Composite Structures,1976,1245.
[8]M.Kattner1,M.Crisinel,Finite element modelling of semi-rigid composite joints,Computers and Structures,2000,78:341-353.
[9]何天森,李国强,平端板连接组合节点性能研究[J],建筑钢结构进展,2004,6(4):43-49.
[10]王燕,厉见芬,钢结构半刚性梁柱节点连接的杠杆力分析与计算[J],建筑钢结构进展,2004,6(2):43-46.
[11]Johnson,R.P.,Hope-Gill,M.C.,Semi-rigid joints in com-posite frames[C],IABSE,Ninth Congress,Preli m,Report,Amsterdams,May1972,133-144.
[12]Davison JB,LamD,Nethercot DA.Semi-rigid action of composite joints[J].Structural Engineer,1990,68(24):489-499.
[13]Leon RT.Semi-rigid composite construction[J].Journal of Constructional Steel Research,1990,1599-1620.
[14]Puhali R,Smotlak I,Zandonini R.Semi-rigid composite ac-tion:experi mental analysis and a suitable model[J].Journal of Constructional Steel Research,1990,15(1-2):121-151.
[15]Altmann R,Maquoi R,Jaspart JP.Experi mental study of the nonlinear behaviour of beam-to-column composite joints[J].Journal of Constructional Steel Research1991,18(1):45-54.
[16]Bernuzzi C,Noe S,Zandonini R.Semi-rigid joints:Experi-mental studies.In:Bjorhovde R,Colson A,Haaijer G,Stark G,Stark J WBeditors.Connectionsinsteel structures II:Be-haviour,strength,and design[R].Pennsylvania,1991:189-200.
[17]Aribert J M,Lachal A.Experi mental investigation of compos-ite connections and global interpretation.In:Colson A,edi-tor.COST C1-Semi-rigid behaviour of civil engineering structural connections[R].Strasbourg,1992:158-169.
[18]Tschemmernegg F.Non-linear behavior of composite joints[J].Journal of Constructional Steel Research,1992,21(1-3):59-70.
[19]Badran M.Tests onsemi-rigidcompositejoints.In:Wald F,editor.COST C1-Semi-rigid behaviour of civil engineering structuralconnections[R].Prague,1994:141-146.
[20]Ren P.Numerical modelling and experi mental analysis of steelbeam-to-column connections allowing for the influence ofreinforced-concrete slabs[D].Ph.D.Thesis,Lausanne,1995.
[21]Xiao Y,Choo BS,Nethercot DA.Composite connections in steel and concrete-I.Experi mental behaviour of composite beam-columnconnections[J].Journal of Constructional Steel Research1994,31(1):3-30.
[22]Anderson D,Najafi AA.Performance of composite connec-tions:major axis end plate joints[J].Journal of Construc-tional SteelResearch1994,31(1):31-57.
[23]A.P.Gardner,H.M.Goldsworthy,Experi mental investiga-tion of the stiffness of critical componentsin a moment-resis-ting composite connection[J],Journal of Constructional Steel Research,2005,61:709-726.
[24]N.D.Brown,D.Anderson,Structural properties of compos-ite major axis end plate connections[J],Journal of Construc-tional Steel Research,2001,57:327-349.
[25]Wang J.Y.Nonlinear analysis of semi-rigid composite joints under lateral loading experi mental and theoretical study[D],Ph.Dthesis,the Hong Kong Polytechnic University,1999.
[26]T.Q.Li,D.A.Nethercot&B.S.Choo,Behaviour of Flush End-plate Composite Connections with Unbalanced Moment and Variable Shear/Moment Ratios-I.Experi mental Behaviour[J],J.Construct.Steel Res.1996,38(2):125-164.
[27]J.M.Aribet and A.Lachal,Partial shear connection adjacent to a beam-to-column composite joint subject to static and cy-clic loads[C],First international conference onsteel&com-posite structures,Pusan,Korea,June14-16,2001.
[28]Dan Dubina,Adrian Ciutina,Aurel Stratan,Cyclic Tests on Bolted Steel and Composite Double-Sided Beam-to-columnJoints[C],First international conference onsteel&compos-ite structures,Pusan,Korea,June14-16,2001.
[29]J.B.Davison,D.Lam,D.A.Nethercot,Semi-rigid action of composite joints[J].The Structural Engineer,1990,38(24):489-499.
[30]Sedlacek G,Weynand K,Byung-Seung Kong,Saal H,KlinkenbergA,Bode H,Kronenberger H.Research work done in Germanyin the field of semi-rigid connections.In:Wald F,editor.COST C1-Semi-rigid behaviour of civil engi-neering structural connections[R].Prague,1994:121-130.
[31]王秀丽,殷占忠,李庆福,李大军,新型钢框架梁柱节点抗震性能试验研究[J],建筑钢结构进展,2005,7(4):42-46.
[32]高华杰,支托型半刚性组合节点的试验研究[D],南京工业大学申请硕士学位论文,2002.
[33]过轶青,端板型半刚性钢-混凝土组合节点的试验研究[D],南京工业大学申请硕士学位论文,2003.
[34]过轶青,胡夏闽,端板型钢-混凝土组合节点受弯承载力塑性计算方法[J],钢结构,2003(1):16-19.
[35]胡夏闽,过轶青,半刚性组合节点初始转动刚度计算[J],工业建筑,2004(3):71-73.
[36]胡夏闽,过轶青,高华杰,刘建平,半刚性钢-混凝土组合节点受弯承载力的计算[J],南京工业大学学报(自然科学版)2002,24(5):25-29.
[37]杨丽,半刚性组合节点在低周反复荷载作用下的性能[D],南京工业大学申请硕士学位论文,2004.
[38]石文龙,平端板连接半刚性梁柱组合节点的试验与理论研究[D],同济大学申请博士学位论文,2006,3.
[39]黄峥,半刚性钢-混凝土组合框架的动力性能研究[D],南京工业大学申请硕士学位论文,2005.
[40]王静峰,竖向荷载作用下半刚性连接组合框架的实用设计方法[D],同济大学申请博士学位论文,2005.
[41]刘清平,水平荷载作用下半刚性连接组合框架的实用设计方法[D],同济大学申请博士学位论文,2006.
[42]Elnashai AS,Broderick BM,Dowling PJ.Earthquake-resist-ant composite steel/concrete structures[J].Structural Engi-neer,1995,73(8):121-132.
[43]J.Y.Richard Liew,T.H.Teo,N.E.Shanmugam,C.H.Yu,Testing of steel-concrete composite connections and appraisal of results[J],Journal of Constructional Steel Research,2000,56:117-150.
[44]L.Calado,L.Si moes da Silva,and R.Si moes,Cyclic Behavior of Steel and Composite Beam-to-Column Joints[J],2000,159-169.
[45]N.E.Shanmugam,Y.H.Ng,J,J.Y.Richard Liew,Behavior of composite haunched beam connection[J],Engineering Structures,2002,24:1451-1463.
[46]J.Y.Richard Liew,T.H.Teo,N.E.Shanmugam,C.H.Yu,Composite joints subject to reversal of loading-part1:experi-mental study[J],Journal of Constructional Steel Research,2004,60:221-246.
[47]Travis P.Green,Roberto T.Leon,Gian A.Rassati,Bidirec-tional Tests on Partially Restrained,Composite Beam-to-Column Connections[J],Journal of structural engineering,2004,130(2):320-327.
[48]European Committee for Standardization(CEN):Eurocode3,Design of Steel Structures:Part1.1General Rules and Rules for Buildings[S],ENV1993-1-1.
[49]European Committee for Standardization(CEN):Eurocode3,Design of Steel Structures,Part1.8:Design of Joints[S],prEN1993-1-8,2003.
[50]R.P.Johnson,Composite Structure of steel and concrete[M](volume1),Blackwell Scientific Publications,1994.
[51]Roberto T.Leon,Semi-rigid Composite Connections[J],The Structural Engineer,1992,70(6):21-25.
[52]Xiao Y,Choo BS,Nethercot DA.Composite connections in steel and concrete-I.Experi mental behaviour of composite beam-columnconnections[J].Journal of Constructional Steel Research,1996,37(1):63-90.
[53]Ahmed B,Nethercot DA.Design of flush endplate connec-tions in composite beams[J].Struct Engr,1997,75(14):233-244.
[54]L.Si moes da Silva,Ana Girao Coelho,Aductility model for steel connections Journal of Constructional Steel Research,2001,57:45-70.
[55]何天森,钢框架结构平端板连接组合节点工作特性分析研究[D],同济大学申请硕士学位论文,2003年.
[56]Nethercot,D.A.,Li,T.Q.and Ahmed,B,Unified classifica-tion systemfor beam-to-column connections[J],Journal of Constructional Steel Research,1998,45(1):39-65.
[57]Nethercot,D.A.,Li,T.Q.and Choo,B.S.,Required rota-tions and moment redistributionfor composite andcontinuous beams[J],Journal of constructional steel research,1995,35(2),121-163.
[58]Li,T.Q.,Choo,B.S.and Nethercot,D.A.,Determination of rotation capacity requirements for steel composite beams[J],Journal of constructional steel research,1995,32:303-332.
[59]Li,T.Q.,Nethercot,D.A.,R.M.Lawson:Required rotation of composite connections[J],Journal of constructional steel research,2000,56:151-173.
[60]Ahmed,B,Nethercot,D.A.:Prediction of Initial Stiffness and Available Rotation Capacity of Major Axis Composite Flush Endplate Connections[J],Journal of Constructional Steel Re-search,1997,41(1):31-60.
[61]D.Anderson,J.M.Aribert,H.Bode,Kronenburger,Design rotationcapacity of compositejoints[J],The Structural Engi-neer,2000,78(6):25-29.
[62]SCI report,Partial strength moment resisting connections in composite frames[R].Document no.SCI-RT-275,Revision0,April,1992.
[63]Aribert,J.M.and Lachal,A.,Experi mental investigation of composite connections in global interpretation[C].Proceed-ings of COST Cl conference on semi-rigid Joints,Strasbourg,France,1992,158-169.
[64]J.M.Aribert,A.Lachal,Partial shear connection adjacent toa beam-to-column composite joint subject to static and cyclic loads[C],First International Conference on Steel and Com-posite Structures,Pusan,Korea,June14-16,2001.
[65]Xiao,Y.,Nethercot,D.A.and Choo,B.S.,Design of semi-rigid composite beam-column connections.Building the Fu-ture:Innovationin Design,Materials and Construction[M],1st edn,ed.F.K.Garas et al.E&FNSpon,London,1992,391-406.
[66]Xiao,Y.,Behaviour of composite connections in steel and concrete[D],Ph.D.thesis,Department of Civil Engineering,University of Nottingham,UK,1994.
[67]G.Huber,F.Tschemmernegg,Modelling of beam-to-column joints[J],J.Construct Steel Res,1998,45(2):199-216.
[68]Wang J.Y.Nonlinear analysis of semi-rigid composite joints under lateral loading experi mental and theoretical study[D],Ph.Dthesis,the Hong Kong Polytechnic University,1999.
[69]Lus A.P.Si m~oes da Silva,Lus Calado,Rui Antnio Duarte Si~moes e Ana G.Coelho,Evaluation of Ductilityin Steel and Composite Beam-to-Column Joints:Analytical Evaluation,Connections in Steel StructuresIV:Steel inthe New Milleni-um[R],R.Leon,2000.
[70]U.I.Dissanayake,I.W.Burgess,J.B.Davison,Modelling of plane composite frames in unpropped construction[J],En-gineering Structures,2000,22:287-303.
[71]Tschemmernegg F.,Queiroz G.,Mechanical model of semi-rigid joints for the analysis of framed steel and composite structures[C],3rdInternational Workshop on Connectionsin Steel Structures,Trento,1995.
[72]G.A.Rassati,S.Noe,Roberto T.Leon,PRcompositejoints under cyclic and dynamic loading conditions:a component modeling approach[C],Fourth International Workshop on Connections in Steel Structures,October22-25,2000,in Roanoke,VA.,213-222.
[73]G.A.Rassati,Roberto T.Leon,S.Noe,Component Model-ing of Partially Restrained Composite Joints under Cyclic and Dynamic Loading[J],Journal of Structural Engineering,ASCE,2004,343-351.
[74]Ackoyd,M.H.and Gerstle,K.H.,Behavior of type2steel frames[R],ASCE,ST7,1982.
[75]Azizinamini,A.,Bradburn,J.H.and Radzi minski,J.B.,Initial stiffness of semi-rigid steel beam-to-column connec-tions[J],J.Construct.Steel Research,1987,8.
[76]Moncarz,P.D.and Gerstle,K.H.,Steel frames with non-linear connections[R],ASCE,ST8,1981.
[77]Stel mack,T.W.,Marley,M.J.and Gerstle,K.H.,Anal-ysis and tests of flexibly connected steel frames[R],ASCE,ST7,1986.
[78]李国强,沈祖炎,考虑节点剪切变形的钢框架弹塑性地震反应分析[J],同济大学学报,1990,(1).
[79]American Institute of Steel Structures Construction(AISC):Load and Resistance Factor Design Specification for Struc-tural Steel Buildings(LRFD)[S],Chicago,IL.1999.
[80]D.Anderson,D.A.Nethercot.Design rotation capacity of composite joints[J],The Structural Engineer,2000,78(6):21-25.
[81]王静峰,竖向荷载作用下半刚性连接组合框架的实用设计方法[D],同济大学博士学位论文,2005.
[82]D.Anethercot,Utilisation of experi mentally obtained connec-tion data in assessing of the steel frames[M],Proceedings,ASCE,Edited by W.F.Chen,1985,13-39.
[83]陈惠发著,周绥平译,钢框架稳定设计[M],上海:世界图书出版社,1999.
[84]Chen,W.F.and Lui,E.M.:Stability Design of Steel Frames[M],CRC Press,Inc.,2000Corporate Blvd.,N.W.,Boca Raton,Florida,1991.
[85]楼国彪,李国强,雷青,钢结构高强度螺栓端板连接研究现状(Ⅰ)[J],建筑钢结构进展,2006,8(2):8-21,36.
[86]蔡益燕,梁柱连接计算方法的演变[J],建筑钢结构进展,2006,8(2):49-54.