叠层橡胶隔震支座的低温往复试验及等效阻尼比推算
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
介绍了对-20、-35、-50℃低温环境中叠层橡胶隔震支座进行往复水平推剪试验的思路和主要结果,论述了采用Matlab/Simulink工具箱建立的用Bouc-Wen模型模拟橡胶隔震器滞变回复力的多目标优化拟合数学模型和求解方法.对-50℃的温度条件下与室温下阻尼值的相对变化关系进行了对比,指出在低温环境下叠层橡胶隔震支座的阻尼比略有降低.
A thought of cyclic horizontal thrust-shearing test for laminated rubber damping bearing in ambient of low temperature such as-20 ℃,-35 ℃,and-50 ℃ and the main result of the test were introduced first.Then a multiple-objective optimized fitting mathematic model and its solution were discussed,where the model concerned was built up with Matlab/Simulink toolbox and simulated with Bouc-Wen model for the hysteretic recovery force.Comparison of relative changes of the dampings was conducted when the bearing was tested at temperature of-50 ℃,indicating that the damping ratio of the laminated rubber damping bearing decreased a little in the ambient of low temperature.
引文
[1]周锡元,阎维明,杨润林.建筑结构的隔震、减振和振动控制[J].建筑结构学报,2002,23(2):2-11.
    [2]周福霖.工程结构减震控制[M].北京:地震出版社,1997.
    [3]李慧,邓学晶,杜永峰,等.寒区叠层橡胶隔震支座拟静力试验研究[J].低温建筑技术,2003(4):33-35.
    [4]DU Y F,LI H,HAN J P,et al.Experimental study on behaviorof laminated rubber bearing under low temperature[C]//ITOH Y,AOKI T.Proc.first International Conference on Ad-vances in Experimental Structural Engineering.Nagoya:ICHIRYUSHA Publisher,2005:213-218.
    [5]尹维祥.叠层橡胶支座稳定性及其受低温环境的影响[D].兰州:甘肃工业大学,2001.
    [6]邓学晶.叠层橡胶垫基础隔震结构动力分析及试验研究[D].甘肃工业大学,1999.
    [7]欧进萍,王光远.结构随机振动[M].北京:高等教育出版社,1998.
    [8]WEN Y K.Method for random vibration of hysteretic systems[J].J Engineering Mechanics Div ASCE,1976,102(EM2):249-263.
    [9]韩丽霞.甘肃省2004年学术年会土木建筑文集[C].兰州:兰州大学出版社,2004:16-21.
    [10]DU Y F,LI H,SPENCER B F.Effect of non-proportionaldamping on seismic isolation[J].Journal of Structural Con-trol,2002,9(3):205-236.
    [11]杜永峰,彭健平,李慧,等.利用Matlab和锤击法的线性结构阻尼试验[J].兰州理工大学学报,2005,31(6):115-118.
    [12]杜永峰,李慧,党育,等.橡胶隔震支座的低温性能及对动力可靠性的影响[J].工程力学,2003(增刊Ⅱ):452-455.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心