引文
[1]Ceesten Broek.Future Steel Vehicle[A].ICSR 2010[C]. Beijing:CSM,2010.
[2]Oliver Hoffmann.Implementation of the NSB-Concept [A].China-Germany Symposium on New Steel Materials [C].Beijing:CSM,2006.
[3]Yoshiyuki Watanabe,Kiyoshi Ishibashi.Development of 590N/mm~2 Steel with Good Weldability for Building Struct ures[J].Nippon Steel Technical Report,2004,90(7):21 - 25.
[4]Alan Glover.X80 Design,Construction and Operation[A]. The International Symposium Proceedings on X80 Steel Grade Pipelines[C].Beijing:CSM,2004.
[S]Dieter Ameling.Steel-Competing for the Future[A].METEC in Steel Conference[C].D(u|¨)sseldorf:German Steel Federa tion,2007.
[6]IISI-AutoCo.Advanced High Strength Steel(AHSS)Application Guideline[R].Germany:International Iron&Steel Institute, Committee on Automotive Applications,2006.
[7]Michel Babbit.Some Highlights on New Steel Products for Automotive Use[J].Steel Research Int.,2006,77(9-10): 620-626.
[8]Thomas Heller.New Steel Solutions for the Worldwide Car Industry[A].China-Germany Symposium on New Steel Materials [C].Beijing:CSM,2006.
[9]Eric Lamm.Advanced Steel Solutions for Automotive Lightweighting [R].Japan:USINOR Auto,Windsor Workshop Nippon Steel Corporation,2001.
[10]Stephen Denner.Advanced High Strength Steels for Automotives Weightlightening[A].DOE Expo4[C].Washington DC:DOE,2001.
[11]Manabu Takahashi.Development of High Strength Steels for Automobiles[J].Nippon Steel Technical Report,2003, 88(7):2-7.
[12]Ponge D.Structural Materials-Steels[R].H(u|¨)rtgenwald: Max-Planck-Institut fur Eisenforschung GmbH,2006.
[13]Tomasz Wierzbicki.New Research Program on Fracture of Advanced High Strength Steels(AHSS)[R].Massachusetts: Impact and Crashworthiness Lab,Massachusetts Institute of Technology,2006.
[14]David K Matlock.Micro-structural Aspects of Advanced High-Strength Sheet Steels[R].Arlington Virginia:AHSS Workshop,NSF-ASP,2006.
[15]ThyssenKrupp Stahl-Service-Center.Steel Needs a Concept-Services and Product Range[R].Germany:ThyssenKrupp Stahl-Service-Center GmbH,2007.
[16]李光瀛.汽车构件与零部件新材料及其热处理新技术的发展与应用[J].金属热处理,2010,(12):1-13.
[17]Shogo Tomita.Advanced Technologies in Strip/Plate Rolling and On-line Heat-treatment at JFE Steel of Recent Years[A].ICSR 2010[C].Beijing:CSM,2010.
[18]Ishikawa Nobuyuki,Endo Shigeru,Kondo Joe.High Performance UOE Linepipes[J].JFE Technical Report,2006,7 (1):20-26.
[19]Zackay V F,Parker E R,Fahr D,et al.[J].Trans.of ASM,1967,60:252-259.
[20]Sakuma Y,Matsumura O,Akisue O.Influence of Annealing Temperature on Microstructure and Mechanical Properties of 400℃Transformed Steel Containing Retained Austenite [J].ISIJ International,1991,31(11):1348-1353.
[21]Koh-ichi Sugimoto,Noboru Usui.Effects of Volume Fraction and Stability of Retained Austenite on Ductility of TRIP-aided Dual-phase Steels[J].ISIJ International,1992, 32(12):1311-1318.
[22]Nakajima K,Urabe T,Hosoya Y.Influence of Microstructural Morphology and Prestraining on Short Fatigue Crack Propagation in Dual-phase Steels[J].ISIJ,International, ??2001,41(3):298-304.
[23]Mesplont C,Vandeputte S,De Cooman B C.Microstructure -Properties Relationships in Complex Phase Cold-Rolled High Strength Steels[J].ISS,2001,XXXIX:359- 371.
[24]Pichler A,Traint S,Pauli H.Processing and Properties of Cold-Rolled Trip Steels[J].ISS,2001,XXXIX:411- 424.
[25]Jacques P J,Harlet Ph,Delannay F.Critical Assessment of the Phase Transformations Occurring During the Heat-Treatment of TRIP Assisted Multiphase Steels[A].Int. Conf.on TRIP-Aided High Strength Ferrous Alloys[C]. GRIPS,Ghent:Ed BC De Cooman,2002.
[26]Georg Frommeyer,Udo Brux,Peter Neumann.Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes[J].ISIJ International. 2003,43(3):438 - 446.
[27]Shunichi Hashimoto,Shushi Ikeda,Koh-ichi Sugimoto,et al.Effectsof Nb and Mo Addition to0.2%C 1.5%Si-1. 5%Mn Steel on Mechanical Properties of Hot Rolled TRIPaided Steel Sheets[J].ISIJ International,2004,44(9): 1590 -1598.
[28]Bandyopadhyay N R,Datta S.Effect of Manganese Partitioning on Transformation Induced Plasticity Characteristics in Microalloyed Dual Phase Steels[J].ISIJ International, 2004,44(5):927-934.
[29]陆匠心,王利,应白桦,等.高强度汽车钢板的特性及应用[J].汽车工艺与材料,2004,(6):13-15.
[30]Wang Li,Jin lei,Xia Qi,et al.Application of TRIP Steel to Replace Mild Steel in Automotive Parts[A].AHSSS 2004 Proceedings[C].Beijing:CSM,2004.
[31]John G Speer,Fernando C Rizzo Assun?? o,David K Matlock, et al.The“Quenching and Partitioning”Process: Background and Recent Progress[J].Materials Research, 2005,8(4):417- 423.
[32]De Cooman B C,Speer J G.Quench and Partitioning Steel:a New AHSS Concept for Automotive Anti Intrusion Applications [J].Steel Research Int.,2006,77(9 -10):634 -640.
[33]Sandra Traint,Andreas Pichler,Robert Sierlinger,et al. Low-alloyed TRIP-Steels with Optimized Strength,Form ing and Welding Properties[J].Steel Research int.,2006, 77(9-10):641-649.
[34]李光瀛.北京市科委重大项目技术研究报告冷轧TRIP600钢的研究与开发[R].北京:钢铁研究总院,2007.
[35]李光瀛,史秉华.超轻钢汽车用TRIP钢的川发[R].北京:钢铁研究总院,2007.
[36]Koh-ichi Sugimoto,Muneo Murata.Formability of C-Si-Mn-Al -Nb-Mo Ultra High strength TRIP-aided Sheet Steels [J].ISIJ International,2007,47(9):1357- 1362.
[37]张峰,宋仁伯,刘雅政.1000MPa级冷轧双相钢的热处理工艺与性能研究[J].材料热处理技术,2008,(2):42-45.
[38]Hulka K.High Strength Steel for Construction Enginnering [R].Germany:NPC GmbH,1999.
[39]Kazuo Omata,Hiroshi Yoshimura,Sadahiro Yamamoto. Leading High Performance Steel Plates with Advanced Manufacturing Technologies[J].NKK Technical Review, 2003,88:73-80.
[40]Yoshiyuki Watanabe,Kiyoshi Ishibashi.Development of 590N/mm2 Steel with Good Weldability for Building Structures [J].Nippon Steel Technical Report,2004,90(7 ):53 - 58.
[41]龚士弘,盛光敏.地震区建筑用钢的开发[A].2001中国钢铁年会论文集[C].北京:中国金属学会,2001.
[42]李光瀛,刘浏.现代钢结构用高强度钢板的开发[A].全国钢结构技术标准及建筑钢结构技术、设备、配套产品应用研讨会论文集[C].北京:中国工程建设标准化协会,2003.
[43]Kim Y M,Kim S K,Lim Y J,et al.Effect of Microstructure on the Yield Ratio and Low Temperature Toughness of Linepipe Steels[J],ISIJ International,2002,42(12):1571 1577.
[44]李光瀛,刘浏,于桂玲,等.抗震建筑结构用高强度钢的开发—低镍铬红土矿资源利用之一[A].第十届中国科协年会论文集[C].北京:中国科学技术协会,2008.
[45]Hoffmann Jacques,Donnay Boris.TMCP Application in Sections, Bars and Rails[A].TMCP TMP 2004[C].Luxembourg: Profilarbed Research,2004.
[46]Franchil A,Crespil P.Some Recent Results of the Research on Steel Rebars[R].Italy:Department of Structural Engineering, Politecnico of Milano,2001.
[47]Bimal Kumar Panigrahi,Surendra Kumar Jain.Impact Toughness of High Strength Low Alloy TMT Reinforce ment Ribbed Bar[J].Bull.Mater.Sci.,2002,25(4):319 -324.
[48]Ishikawa Nobuguki,Endo Shigeru,Kondo Joe.High Performance UOE Linepipes[J].JFE Technical Report,2006,7 (1):20-26.
[49]王国栋.TMCP技术的新进展——柔性化在线热处理技术与装备[J].轧钢,2010,27(2):1-6.
[50]Naoshi Ayukawa,Yoshio Terada.Design Concept of High Strength UOE Linepipes[A].The International Symposium Proceedings on X80 Steel Grade Pipelines[C].Beijing: CSM,2004,320- 350.
[51]Jang-Yong Yoo,Jin Ho Bae.Mechanical Properties and Microstructure of API X80 Grade Hot-Rolled Strips and Plates [A].The International Symposium Proceedings on X80 Steel Grade Pipelines[C].Beijing:CSM,2004.
[52]Guang-ying Li,Shao-kang Pu,Ping-he Li,et al.Production, Microstructure and Properties of Microalloyed High strength 385 MN/mm~2 Grade Ship Plate[A].Proceedings of HSLA Steels'85 Beijing[C].Beijing:CSM,1985,605 - 611.
[53]Ohjoon kwon.A Technology for the Prediction and Control of Microstructure Changes and Mechanical Properties in Steel[J].ISIJ International,1992,32(3):350- 358.
[54]Yoshie A,Fujioka M,Watanabe Y,et al.Modelling of Mi- ??crostructural Evolution and Mechanical Properties of Steel Plates Produced by Thermo-Mechanical Control Process [J].ISIJ International,1992,32(3):395-404.
[55]Pietrzyk M,Roucoules C,Hodgson P D.Modelling the During Rolling Thermomechanical of a Nb HSLASteel and Microstructural Evo[ution[J].ISIJ International,1995,35 (5):531-541.
[56]Bai D O,Yuet Maccagn S,Jonas O J.Static Recrystallization of Nband Cooling Conditions Nb-B Steels under Continuous [J].ISIJ Internationai,1996,36(8):1084-1093.
[57]Medina S F,Mancillal J E.Static Recrysta IIization Modelling of Hot Deformed Steels Containing Several Alloying Elements [J].ISIJ International,1996,36(8):1070-1076.
[58]Panigrahi B K.Processing of Low Carbon Steel Plate and HotStrip an Overview[J].Bull.Mater.Sci.,2001,24 (4):361 - 371.
[59]Shigeaki Ogibayashi.Advances in Technology of Oxide Metallurgy [J].Nippon Steel Technical Report,1994,61(4):70 -76.
[60]Akihiko Kojima,Akihito Kiyose.Super High HAZ Toughness Technology with Fine Microstructure Imparted by Fine [1]Particles[J].Nippon Steel Technical Report,2004,90 (6):2-6.
[61]Yoshio Terada,Akihiko Kojima.High-strength Linepipes with Excellent HAZ Toughness[J].Nippon Steel Technical Report,2004,90(6):88-93.
[62]Zajak S Ferrite.Grain Refinement and Precipitation Strengthening in V Microalloyed Steels[J].ISS,2001, XXXIX:497- 508.
[63]Maki T,Furuhara T.Kinetics and Crystallography of Intragranular Ferrite Formed on MnS + V(C,N) Complex Precipitate in Austenite[A].ISUGS 2005 and HSLA Steel 2005 [C].Sanya:CSM,2005.
[64]Shikanai Nobuo,Mitao Shinji,Endo Shigeru.Recent Development in Microstructural Control Technologies through the Thermo-Mechanica[Control Process(TMCP) with JFE Steel' s High-Performance Plates[J].JFE Technical Report, 2008,11(6):1-6.
[65]Nagao Akihide,Ito Takayuki,Obinata Tadashi.Development of YP 960 and 1 1000 MPa Class Ultra High Strength Steel Plates with Excellent Toughness and High Resistance to Delayed Fracture for Construction and Industrial Machinery [J].JFE Technical Report,2008,11(6):13 18.
[66]Mauk P J.Current State and Developments for Hot and Cold Rolling of Flat and Long Products[A].ICSR 2010[C]. Beijing:CSM,2010.
[67]Masui T.Progress and Outlook of Steel Plate Production Technology in Japan[A].ICSR 2010[C].Beijing:CSM,2010.
[68]Wuppermann C D,Sievering R,Mtiller U.Future Rolling Technology Defined by Product Properties[A].ICSR 2010 [C].Beijing:CSM,2010.