引文
[1]李国强,王彦博,陈素文,孙飞飞.高强度结构钢研究现状及在抗震设防区应用的问题[J].建筑结构学报,2013,34(1):1-13.(LI Guoqiang,WANGYanbo,CHEN Suwen,SUN Feifei.State-of-the-arts ofresearch on high strength structural steels and keyissues of using high strength steels in seismic structures[J].Journal of Building Structures,2013,34(1):1-13.(in Chineses))
[2]GB50011—2010建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.(GB50011—2010Codefor seismic design of building[S].Beijing:ChinaArchitecture&Building Press,2010.(in Chinese))
[3]GB/T1591—2008低合金高强度结构钢[S].北京:中国标准出版社,2008.(GB/T1591—2008Highstrength low alloy structural steels[S].Beijing:ChinaStandard Press,2008.(in Chinese))
[4]苏明周,顾强.箱形截面钢压弯构件的滞回性能和板件宽厚比限值研究[J].建筑结构学报,2000,21(5):41-47.(SU Mingzhou,GU Qiang.Study onhysteretic behavior of box-section steel beam-columnsunder cyclic bending and on limiting ratio of width-to-thickness of its plates[J].Journal of BuildingStructures,2000,21(5):41-47.(in Chineses))
[5]苏明周,顾强,申林.钢构件在循环大应变作用下的有限元分析[J].工程力学,2001,18(4):51-59.(SU Ming-zhou,GU Qaing,SHEN Lin.Finite elementanalysis of steel members under cyclic loading[J].Engineering Mechanics,2001,18(4):51-59.(inChinese))
[6]苏明周,顾强,郭兵.箱形截面钢压弯构件受循环弯矩作用的试验研究和理论分析[J].建筑结构学报,2001,22(4):9-16.(SU Mingzhou,GU Qiang,GUO Bing.Experiment and analysis of the box-sectionmembers with compression and flexure under cyclicbending[J].Journal of Building Structures,2001,22(4):9-16.(in Chineses))
[7]陈以一,周锋,陈城.宽肢薄腹H形截面钢柱的滞回性能[J].世界地震工程,2002,18(4):23-29.(CHEN Yiyi,ZHOU Feng,CHEN Cheng.Researchon the hysteretic behaviour of H-shaped steel columnswith big width-to-thickness ratio plates[J].WorldInformation on Earthquake Engineering,2002,18(4):23-29.(in Chinese))
[8]Gao S,Usami T,Ge H.Eccentrically loaded steelcolumns under cyclic in-plane loading[J].Journal ofStructural Engineering,ASCE,2000,126(8):964-973.
[9]Nakashima M,Liu D.Instability and complete failureof steel columns subjected to cyclic loading[J].Journalof Engineering Mechanics,2005,131(6):559-567.
[10]Kuwamura H,Kato B.Inelastic behavior of highstrength steel members with low yield ratio[C]//Proceedings of the Pacific Structural Steel Conference.N.S.W.,Australia:Australian Institute of SteelConstruction,1989:429-437.
[11]邓椿森,施刚,张勇,石永久,王元清.高强度钢材压弯构件循环荷载作用下受力性能的有限元分析[J].建筑结构学报,2010,31(增刊1):28-34.(DENG Chunsen,SHI Gang,ZHANG Yong,SHIYongjiu,WANG Yuanqing.Finite element analysis onhysteretic behavior of high strength steel columns undercyclic loading[J].Journal of Building Structures,2010,31(Suppl.1):28-34.(in Chineses))
[12]李国强,王彦博,陈素文,崔嵬,孙飞飞.Q460C高强度结构钢焊接H形和箱形截面柱低周反复加载试验研究[J].建筑结构学报,2013,34(3):80-86.(LI Guoqiang,WANG Yanbo,CHEN Suwen,CUIWei,SUN Feifei.Experimental study of Q460C highstrength steel welded H-section and box-section columnsunder cyclic loading[J].Journal of BuildingStructures,2013,34(3):80-86.(in Chineses))
[13]孙飞飞,谢黎明,崔嵬,李国强,陈素文,王彦博.Q460C高强钢单调与反复加载性能试验研究[J].建筑结构学报,2013,34(1):53-58.(SUN Feifei,XIE Liming,CUI Wei,LI Guoqiang,CHEN Suwen,WANG Yanbo.Experimental study on materialproperties of Q460C high strength steel under monotonicand cyclic loading[J].Journal of Building Structures,2013,34(1):53-58.(in Chineses))
[14]Wang Yan-Bo,Li Guo-Qiang,Chen Su-Wen.Theassessment of residual stresses in welded high strengthsteel box sections[J].Journal of Constructional SteelResearch,2012,76:93-99.
[15]Wang Yan-Bo,Li Guo-Qiang,Chen Su-Wen.Residualstresses in welded flame-cut high strength steel H-sections[J].Journal of Constructional Steel Research,2012,79:159-165.