引文
[1]李辉,丁桦.结构动力模型修正方法研究进展[J].力学进展,2005,35(2):170-180.
[2]Mottershead J E,Friswell M L.Model updating instructural dynamics[J].Journal of Sound and Vibra-tion,1993,167(2):347-375.
[3]Astrom K J,Eykhoff P.System identification,a survey[J].Automation,1971,7(2):123-162.
[4]Guyan R J.Reduction of stiffness and mass matrices[J].AIAA Journal,1965,3(2):380.
[5]O’Callahan J C.A procedure for improved reducedsystem(Irs)model[C]//Alfred Lw,Dominick J,Demichele,Eds.Proceedings of The 7th InternationalModal Analysis Conference,Las Vegas,1989-02-20-22.Kissimmee:Union College,1989:17-21.
[6]Kammer D C.Test-analysis modal development usingan exact modal reduction[J].The International Jour-nal of Analytical and Experiment Modal Analysis,1987,2(4):174-179.
[7]张德文.改进Guyan递推减缩技术[J].计算结构力学及应用,1996,13(1):90-94.
[8]O’Callahan J C.A procedure for improved reducedsystem(irs)model[C]//Alfred Lw,Dominick J,Demichele,Eds.Proceedings of the 7th internationalmodal analysis conference,Las Vegas,1989-02-20-22.Kissimmee:Union College,1989:29-37.
[9]张德文,魏阜旋.模型修正与破损诊断[M].北京:科学出版社,1999.
[10]Berman A,Nagy E J.Improvement of a large analyti-cal model using test data[J].AIAA Journal,1983,21(3):1168-1173.
[11]Farhat C,Hemez F M.Updating finite element dy-namic models using an element-by-element sensitivitymethodology[J].AIAA Journal.1993,31(9):1702-1711.
[12]曾庆华.结构动力修改技术若干问题研究(博士学位论文)[D].南京:南京航空航天大学,1989.
[13]Kabe A M.Stiffness matrix adjustment using mode da-ta[J].AIAA Journal,1985,23(9):1431-1436.
[14]Foster C D,Mottershead J E.Method for improving fi-nite element models by using experimental data.Ap-plication and implications for vibration monitoring[J].International Journal of Mechanical Sciences,1990,32(3):191-203.
[15]Mottershead J E,Lees A W,Stanway R.Linear,fre-quency domain filter for parameter identification of vi-brating structures[J].American Society of MechanicalEngineers,Design Engineering Division(Publication)DE,1987,(4):153-162.
[16]Larsson P O.Model updating based on forced vibra-tions[C]//Proceedings of the 4th interactional confer-ence on recent advances in Structural Dynamics,1991:95-98.
[17]Kye-Si Kwon,Lin Rong-ming.Frequency selectionmethod for FRF-based model updating[J].Journal ofSound and Vibration,2004,278(1):285-306.
[18]Hemez F M,Brown G W.Improving structural dynam-ics models by correlating simulated to measured fre-quency response functions[J].Collection of TechnicalPapers-AIAA/ASME/ASCE/AHS/ASC Structures,Structural Dynamics&Materials Conference,1998,1:772-782.
[19]Ting T.Design sensitivity analysis of structural fre-quency response[J].AIAA Journal,1993,31(10):1965-1967.
[20]Ziaei-Rad S,Ewins D J.Finite element model upda-ting of rotating structures using adaptive simulated an-nealing[C]//Proceedings of the 2002 InternationalConference on Noise and Vibration Engineering,IS-MA,2002:2281-2284.
[21]Levin R I,Lieven NAJ.Dynamic finite element mod-el updating using simulated annealing and genetic algo-rithms[J].Mechanical Systems&Signal Processing,1998,12(1):91-120.
[22]Kirkpatric S,Gelatt C D,Vecchi MP.Optimization bysimulated annealing[J].Science,1983,220(4598):671-680.
[23]Pandey P C,Barai S.Multiplayer perception in dan-mage detection of Bridge structures[J].Computersand Structures,1992,42(4):649-659.
[24]Atalla MJ,Inman D J.On model updating using neu-ral networks[J].Mechanical Systems and Signal Pro-cessing,1998,12(1):135-607.
[25]Levin R I,Lievin NA.Dynamical finite element mod-el updating using neural networks[J].Journal ofsound and vibration,1998,210(5):593-607.
[26]Levin R I,Lieven N A,Lowenberg M H.Measuringand improving neural network generalization for modelupdating[J].Journal of Sound and Vibration,2000,238(3):401-424.
[27]Yun C B,Bahng E Y.Substructure identification u-sing neural networks[J].Computers and Structures,2000,77(1):41-52.
[28]Xu Bin,Wu Zhishen,Chen Genda,et al.Direct i-dentification of structural parameters from dynamic re-sponses with neural networks[J].Engineering Appli-cations of Artificial Intelligence,2004,17(8):931-943.
[29]Zang C,Imregun M.Structural damage detection usingartificial neural networks and measured FRF data re-duced via component projection[J].Journal of soundand vibration,2001,242(5):813-827.
[30]Chang C C,Xu Y G,To W M.Selection of trainingsamples for model updating using neural networks[J].Journal of Sound and Vibration,2002,249(5):867-883.
[31]夏品奇,Brownjohn J MW.斜拉桥有限元建模与模型修正[J].振动工程学报,2003,16(2):219-223.
[32]Brownjohn J M W,Lee J,Cheong B.Dynamic per-formance of a curved cable-stayed bridge[J].Engi-neering structure,1999,21(11):1015-1027.
[33]范立础,袁万城,张启伟.悬索桥结构基于敏感性分析的动力有限元模型修正[J].土木工程学报,2000,33(1):9-14.
[34]张启伟.基于环境振动测量值的悬索桥结构动力模型修正[J].振动工程学报,2002,15(1):74-78.
[35]袁颖,林皋,周爱红,等.基于改进遗传算法的桥梁结构损伤识别应用研究[J].应用力学学报,2007,24(2):186-191.
[36]McKinney D C,Lin M D.Genetic algorithm solutionof groundwater management models[J].Water Re-sources Research,1994,30(6):1897-1906.
[37]Grefenstette J J.Optimization of control parameters forgenetic algorithms[J].IEEE Transactions on Systems,Man and Cybernetics,1986,16(1):122-128.
[38]Ricles J M,Kosmatka J B.Damage detection in elas-tic structures using vibratory residual forces and weigh-ted sensitivity[J].AIAA Journal,1992,30(9):2310-2316.
[39]Michelevicz Z.Genetic algorithms+data structures=evolution programs,AI Series[M].NewYork:Spring-er-Verlag,1994.
[40]闫桂荣,段忠东,欧进萍.遗传算法在结构有限元模型修正中的应用[J].哈尔滨工业大学学报,2007,39(2):181-186.
[41]Chou J H,Ghaboussi J.Genetic algorithmin structuraldamage detection[J].Computers and Structures,2001,79:1335-1353.
[42]段雪平,朱宏平.基于遗传算法的结构破损参数检测[J].工程力学,2001,(A3):422-426.
[43]孟祥苹,张化光,何巍.一种基于二进制编码的改进遗传算法[J].吉林工业大学学报(自然科学版),1999,29(3):81-85.
[44]刘福强,张令弥.作动器/传感器优化配置的研究进展[J].力学进展,2000,30(4):506-516.
[45]李宏男,李东升.土木工程结构安全性评估、健康监测及诊断述评[J].地震工程与工程振动,2002,22(3):82-90.
[46]于阿涛,赵鸣.基于振动的土木工程结构健康监测研究进展[J].福州大学学报(自然科学版),2005,33(增刊):233-239
[47]崔飞,袁万城,史家钧.传感器优化布设在桥梁健康监测中的应用[J].同济大学学报,1999,27(2):165-169.
[48]Thomas G Came,Clark R Dohmann.A modal test de-sign strategy for modal correlation[C]//Proc 13th In-ternational Modal Analysis Conference,Edited byBathe,K J,New York:Union College,Schenectady,1995:927-933.
[49]Cheng Anpan.Optimal sensor placement for modal pa-rameter identification using signal subspace correlationtechniques[J].Mechanical System and Signal Pro-cessing,2003,17(2):361-378.
[50]马震岳,张克华,陈婧.传感器优化布设在水电站厂房振动特性研究中应用[J].大连理工大学学报,2006,46(2):262-266.
[51]黄民水,郭文增,朱宏平,等.基于环境激励的桥梁动力特性测试及模型修正[J].华中科技大学学报(城市科学版),2006,23(4):57-60.
[52]Huang minshui,Zhu hongping.Finite element modelupdating of bridge structures based on sensitivity analy-sis and optimization algorithm[J].Wuhan UniversityJournal of Natural Sciences,2008,13(1):87-92.
[53]Huang minshui,Guo wenzeng,Zhu hongping,et al.Dynamic test and finite element model updating ofbridge structures based on ambient vibration[J].Frontiers of Architecture and Civil Engineering in Chi-na,2008,2(2):139-144.
[54]黄民水,朱宏平,李炜明.基于改进遗传算法的桥梁结构传感器优化布置[J].振动与冲击,2008,27(3):82-86.
[55]黄民水,朱宏平.桥梁结构模态测试中传感器优化布置的序列法及应用[J].桥梁建设,2007,(5):80-83.
[56]黄民水,朱宏平,宋金强.传感器优化布置在桥梁结构损伤检测中的应用[J].公路交通科技,2008,25(2):85-88.