一种有效的把空间曲面近似展成平面的方法

英文篇名：A USEFUL EFFECTIVE METHOD FOR APPROXIMATE TRANSFORMATION OF AN ARBITRARY CURVED SURFACE INTO A PLANE
中文刊名：天津大学学报
英文刊名：Journal of Tianjin University
作者：李中立 ; 叶小兵 ; 吴健生 ; 黄达达
英文作者：Li Zhongli (Shijiazhuang Railway Institute ; 050043) Yie Xiaobing Wu Jiansheng (Research Institute of Architectural Design ; Tianjin University) Huang Dada (Beijing N & L Fabric Technology Co Ltd ; 100080)
中文关键词：动态规划法 ; 条元 ; 平面试形状
英文关键词：DPM strip trial plan
出版日期：1999-01-27
机构：石家庄铁道学院,天津大学建筑设计研究院,北京纽曼帝莱蒙膜建筑技术有限公司
年：1999
期：01
出版单位：天津大学学报

摘要

将动态规划法原理同平面热应力问题相结合，用于空间任意曲面近似展成平面．计算机辅助设计在空间曲面的设计中是不可缺少的，尤其是在空间曲面转换为平面的制作过程中．动态规划法是基于有限元法的基本思想，把空间任意曲面划分成有限个相邻的条块（本文称之为条元），条元的宽窄一般由料的幅宽和曲面的曲率决定；通过平面试形状，依次耦联计算出每条元的展开形状，便可得到整个曲面的展开图．最后给出两个算例．
The dynamic programming method(DPM) is combined with the plant thermodynamics problem to approximately transform an arbitrary curved surface into a plant.The CAD system is indispensable in designing a curved surface,especially in manufacturing processes for transformation of a curved surface into a plane.This method is based on the finite element analysis theory.An objective curved surface is decomposed into regions of adjacent strips according to the width of material and the variety of surface curvature.Then,each region(or strip) is developed in turn into a flattened shape by using the trial plan.The whole shape is derived by solving multi stage decision processes.Finally,two examples are presented by way of illustration.

引文

1DistefanoNetal．Theformulationandsolutionoffiniteel－ementequation．ComputerMethodsinAppliedMechanicsandEngineering，1975，5：39～522ShimadaTetal．Approximatetransformationofanarbi－trarycurvedsurfaceintoaplaneusingdynamicprogram－ming．Computer－AidedDesign，1991，23：153～1593Belmanetal．Applieddynamicprogramming．PrincetonU－niversityPress，19624KodamaIM．Singularvaluedecompositionandapplicationsystemcontrol．JournalSICE，1982，21：763～7725BelmanRE，DreyfusSE．Applieddynamicprogramming．NewJersey：PrincetonUniversityPress，19626吴健生等．应用有限元法进行膜结构剪裁分析．第六届空间结构学术会议论文集，广州：地震出版社，1992