超宽带搜救雷达的高速数据采集系统设计
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
利用超宽带雷达进行灾后生命搜救正在成为救灾手段的重要方法之一。其中对雷达回波信号数据的实时采集和存储是最重要的环节之一。但是由于DSP的工作时钟和A/D的采样速度不同,而采用FIFO作为两者的接口,从而提高系统的效率和稳定性。文中介绍了以TMS320VC5509为核心处理器,基于FIFO和DSP的超宽带搜救雷达数据采集系统的硬件和软件设计。实验结果表明,该系统具有速度快、稳定性高、控制方便等特点。
Using UWB Radar to search and rescue life is becoming an important means of disaster relief. The data acquisition and store for radar echo signals is one of the most important links. However the working clock of DSP and the sampling rate of A/D converter are different,so that FIFO is taken as the interface between these two,thus to improve the efficiency and stability of the system. This paper describes hardware and software design of data acquisition system for UWB search and rescue radar,which adopts TMS320VC5509 as the core processor and is based on FIFO and DSP. The experiment results and the practical application show that this system possesses the characteristics of fast speed,high stability and convenient control.
引文
[1]顾建华,陈维锋,郝清源.地震灾害现场救援搜救策略与搜救方法有关问题的讨论[J].国际地震动态,2003(6):6-12.
    [2]路国华,王健琪,杨国胜,等.生物雷达技术的研究现状[J].国外医学生物医学工程,2004,27(6):368-369.
    [3]吴宝丽,陈健.基于FIFO与电平转换器的DSP高速ADC系统[J].国外电子元器件,2004(10):25-28.
    [4]于红,闫晓燕.基于雷达信号的高速数据采集系统的设计[J].微计算机信息,2006,22(6-1):150-151.
    [5]张冬玲,王良红.基于DSP的微弱信号检测采集系统设计[J].微计算机信息,2005,21(7):83-84.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心